V-ZUG 629 Installation guide

V-ZUG
Brand
V-ZUG
Model
629
Category
Drink coolers
Type
Installation guide

V-ZUG 629 is a wine cooler that offers optimal conditions for storing your wine collection. With its adjustable temperature range and humidity control, you can customize the environment to suit the specific needs of your wines. The unit also features a vibration-free compressor to ensure that your wines are not disturbed during storage. With its sleek design and user-friendly interface, the V-ZUG 629 is the perfect addition to any wine enthusiast's home.

V-ZUG 629 is a wine cooler that offers optimal conditions for storing your wine collection. With its adjustable temperature range and humidity control, you can customize the environment to suit the specific needs of your wines. The unit also features a vibration-free compressor to ensure that your wines are not disturbed during storage. With its sleek design and user-friendly interface, the V-ZUG 629 is the perfect addition to any wine enthusiast's home.

Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Installation instructions
Wine cooler
Construction form 60
J629.50-3
26.1.12 MAS
7
These installation instructions apply to the model: 629
Identification plate
➤ The identification plate is located bottom right on the inside of the appliance.
➤ Refer to the identification plate for specifications for the required mains voltage, current type and fuses.
The appliance should be installed by qualified personnel only. Each step must be carried out and checked in full in the order
specified.
Validity
General notes
If installing into combustible material, the guidelines and safety standards for low voltage installations and fire protection must
be strictly observed.
Installation accessories supplied
Description Size Number Pos.
Support plate – 2 A
Pan-head chipboard screw 3.5 × 12 8 B
Countersunk chipboard screw 3.5 × 16 4 C
Adapter profile, complete 878 mm 1 D
Spacer plate for hinge, complete – 2 E
Stopper set – 1 –
Electrical connections
Electrical connections must made by trained electricians in accordance with the guidelines and standards for low voltage
installations and the specifications of the local electricity supply companies.
A plug-in appliance may only be connected to a socket outlet with earthing contact, installed according to specifications. An
all-pole mains isolating device with 3 mm contact opening should be provided in the house wiring system. Switches, plug and
socket devices, circuit breakers and fusible cut-outs which are accessible after installation and which have all-poles switching
are permissible as isolating devices. Effective earthing and separately installed neutral and earth conductors ensure safe and
fault-free operation. After installation, live parts and cables with basic insulation must not be accessible. Old installations should
always be checked.
Installation instructions
Wine cooler
Construction form 60
J629.50-3
26.1.12 MAS
8
The appliance is available with left- or right-hand opening. This cannot be changed later.
Installation
Allow a gap (at the top and bottom) less than the width of the appliance to ensure proper ventilation (sheets 5–13 in the
technical guide on kitchen planning and design from the Swiss Kitchen Association (KVS)). Shadow gaps alone – even if
extended over several elements – are not sufficient.
1. Installing the mounting angle (support plates A) 2. Installing the appliance
3. Securing the appliance 4. Adjusting the appliance door
X
X
min. 550
55
min. 560
X–X
!
B (4×)
A
55
873–877
877–880
A
16 + = 19
E
886
873
566
80
547
594
min. 200 cm²
min. 200 cm²
120
L
V
E (2×)
V
878
L
D
V
C (4×)
B (4×)
Y
Z
Y
X
X
X
Y
Z
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

V-ZUG 629 Installation guide

V-ZUG
Brand
V-ZUG
Model
629
Category
Drink coolers
Type
Installation guide

V-ZUG 629 is a wine cooler that offers optimal conditions for storing your wine collection. With its adjustable temperature range and humidity control, you can customize the environment to suit the specific needs of your wines. The unit also features a vibration-free compressor to ensure that your wines are not disturbed during storage. With its sleek design and user-friendly interface, the V-ZUG 629 is the perfect addition to any wine enthusiast's home.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents