Hampton Bay 36LGM-L User guide

Brand: Hampton Bay

Model: 36LGM-L

Category: Household fans

Type: User guide

THANK YOU

We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this ceiling fan. We strive to continually create

quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank

you for choosing Hampton Bay!

Item #602-647

Model #36LGM-L

USE AND CARE GUIDE

MYRON CEILING FAN

Questions, problems, missing parts? Before returning to the store,

call Hampton Bay Customer Service

8 a.m. - 6 p.m., EST, Monday-Friday

1-877-527-0313

HAMPTONBAY.COM

DPA12122002 新版 SIZE:216x280mm 80g模糙纸单黑色 28P 骑马钉 2013-4-16 第 1／28页

Table of Contents

Table of Contents .......................................................... 2



Safety Information ......................................................... 2



Warranty ......................................................................... 3



Pre-Installation .............................................................. 3



Planning Installation ................................................................3



Tools Required .........................................................................3



Hardware Included ...................................................................4



Package Contents ....................................................................5



Installation ..................................................................... 6



Operation ..................................................................... 12



Care and Cleaning ...................................................... 13



Troubleshooting .......................................................... 13



Safety Information

1. All wiring must be in accordance with the National Electrical

Code ANSI/NFPA 70-1999 and local electrical codes.

Electrical installation should be performed by a qualified

licensed electrician.

2. The outlet box and support structure must be securely

mounted and capable of reliably supporting a minimum of

35 lbs. (16 kg). Use only UL-listed outlet boxes marked “For

Fan Support.”

3. Do not operate the reversing switch while the fan blades are

in motion. You must turn the fan off and stop the blades

before you reverse the blade direction.

4. Avoid placing objects in the path of the fan blades.

5. Electrical diagrams are for reference only. Light kits that are

not packed with the fan must be UL-listed and marked

suitable for use with the model fan you are installing.

Switches must be UL General Use Switches. Refer to the

instructions packaged with the light kits and switches for

proper assembly.

6. After making electrical connections, spliced conductors

should be turned upward and pushed carefully up into the

outlet box. The wires should be spread apart with the

grounded conductor and the equipment-grounding

conductor on one side of the outlet box.

WARNING: To reduce the risk of electric shock, ensure

electricity has been turned off at the circuit breaker or fuse

box before beginning.

WARNING: To reduce the risk of personal injury, do not

bend the blade brackets (also referred to as flanges) during

assembly or after installation. Do not insert objects in the

path of the blades.

WARNING: To reduce the risk of fire or electric shock, do

not use this fan with any solid-state speed control device.

CAUTION: To reduce the risk of injury to person, the fan

must be mounted with a minimum of 7 feet clearance from

the trailing edge of the blades to the floor.

DPA12122002 新版 SIZE:216x280mm 80g模糙纸单黑色 28P 骑马钉 2013-4-16 第 2／28页

3 HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

Warranty

WHAT IS COVERED

The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a

lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or

acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after

the date of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable

or superior model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All

costs of removing and reinstalling the product are your responsibility. Damage to any part such as by accident or misuse or improper

installation or by affixing any accessories, is not covered by this warranty. Because of varying climatic conditions this warranty does not

cover any changes in brass finish, including rusting, pitting, corroding, tarnishing, or peeling. Brass finishes of this type give their longest

useful life when protected from varying weather conditions. A certain amount of “wobble” is normal and should not be considered a defect.

Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. Hampton Bay hereby

disclaims any and all warranties, including but not limited to those of merchantability and fitness for a particular purpose to the extent

permitted by law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as specified in the express

warranty. Some states do not allow a limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The

retailer shall not be liable for incidental, consequential, or special damages arising out of or in connection with product use or performance

except as may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential damages, so the above

exclusion or limitation may not apply to you. This warranty gives specific legal rights, and you may also have other rights which vary from

state to state. This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a claim on the warranty

must be paid by the customer.

Contact the Customer Service Team at 1-877-527-0313 or visit www.HamptonBay.com.

Pre-Installation

PLANNING INSTALLATION

Compare all parts with the Hardware Included and Package Contents sections in this manual. If any part is missing or damaged, do not

install this fan and contact the Customer Service Team at 1-877-527-0313 or visit www.HamptonBay.com.

TOOLS REQUIRED

Hammer

Safety

goggles

Phillips

screwdriver

Flathead

screwdriver

Wire cutters

Step

ladder

DPA12122002 新版 SIZE:216x280mm 80g模糙纸单黑色 28P 骑马钉 2013-4-16 第 3／28页

Pre-Installation (continued)

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

Part Description Quantity

Blade screw 21

BB Downrod clip (preassembled to Downrod (E)) 1

CC Downrod pin (preassembled to Downrod (E)) 1

DD Collar screw (preassembled to Motor (D)) 1

EE Washe

FF Star washer 2

GG Lockwasher 2

HH Mounting bracket screw 2

II Canopy screw (preassembled to Mounting bracket (H)) 2

JJ Light kit screw (Preassembled to Motor (D)) 3

KK Wire connector 4

DPA12122002 新版 SIZE:216x280mm 80g模糙纸单黑色 28P 骑马钉 2013-4-16 第 4／28页

5 HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

Pre-Installation (continued)

PACKAGE CONTENTS

Part Description Quantity

Blade fix ring

B Fan blade 5

C Blade fix ring B 1

D Moto

E Downrod 1

F Canopy 1

G Upper housing 1

H Mounting bracket 1

I Transmitter/Receiver 1 each

J Light kit 1

K Bulb 2

L Glass shade 1

DPA12122002 新版 SIZE:216x280mm 80g模糙纸单黑色 28P 骑马钉 2013-4-16 第 5／28页

Installation

Determining the mounting method

Attaching the blades to the blade

fix ring

WARNING: To reduce the risk of fire, electric shock, or

personal injury, mount the fan to an outlet box marked

acceptable for fan support using the screws provided with

the outlet box. An outlet box commonly used for the support

of lighting fixtures may not be acceptable for fan support

and may need to be replaced. If in doubt, consult a qualified

electrician.

If your ceiling fan does not have an existing UL-listed mounting

box, then install one using the following instructions:

□ Disconnect the power by removing the fuses or turning off

the circuit breakers.

□ Secure the outlet box directly to the building structure. Use

the appropriate fasteners and materials. The outlet box and

its bracing must be able to fully support the weight of the

moving fan (at least 35 lbs.). Do not use a plastic outlet

box.

□ To hang your fan where there is an existing fixture but no

ceiling joist, you may need an installation hanger bar as

shown in the last figure.

□ Attach each fan blade (B) to blade fix ring A (A) using blade

screws (AA). Tighten securely with a Phillips screwdriver.

Outlet Box

Recessed

Mounting

Plate

Ceiling

Hanger Bar

Provide Strong

Support

DPA12122002 新版 SIZE:216x280mm 80g模糙纸单黑色 28P 骑马钉 2013-4-16 第 6／28页

7 HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

Installation (continued)

Attaching the blade assembly to

the motor

Preparing the downrod

□ Place the blade assembly over the motor (D).

□ Place blade fix ring B (C) over the blade assembly (B).

□ Secure the blade fix ring B (C) and the blade assembly (B)

to the motor (D) using blade screws (AA).

□ Remove the downrod clip (BB) and downrod pin (CC) from

the downrod (E).

□ Thread the downrod (E) through the canopy (F) and upper

housing (G).

DPA12122002 新版 SIZE:216x280mm 80g模糙纸单黑色 28P 骑马钉 2013-4-16 第 7／28页

Installation (continued)

Attaching the downrod assembly

to the motor

Installing the mounting bracket

□ Loosen, but do not remove the collar screw (DD) on the

collar (1) of the motor (D).

□ Guide the downrod assembly into the collar (1) of the motor

(D). Ensure that all of the holes are in alignment.

□ Carefully insert the downrod pin (CC) through the holes in

the collar (1) and downrod (E).

□ Insert the downrod clip (BB) through the hole near the end

of the downrod pin (CC) until it snaps into its locked

position.

□ Re-tighten the collar screw (DD) on the collar (1) on top of

the motor (D).

□ Attach the mounting bracket (H) to the outlet box in the

ceiling using washers (EE), star washers (FF), lockwashers

(GG), and mounting bracket screws (HH). Tighten securely

with a Phillips screwdriver.

DPA12122002 新版 SIZE:216x280mm 80g模糙纸单黑色 28P 骑马钉 2013-4-16 第 8／28页

9 HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

Installation (continued)

Installing the fan assembly and

receiver

Connecting the wires

□ Seat the hanger ball portion of the ball/downrod assembly

(E) in the mounting bracket socket. Ensure that the tab on

the mounting bracket (H) socket is properly seated in the

groove in the hanger ball.

□ Set the codes on the transmitter and receiver (I) by moving

the switches (1) up and down. Ensure that the transmitter

and receiver are set to the same code or the transmitter

will not work.

□ Slide the receiver (I) into position in the space between the

hanger ball portion of the downrod (E) and the mounting

bracket (H).

WARNING: To avoid possible electrical shock, be sure

electricity is turned off at the main fuse box before wiring.

If you are not sure the electrical box and fan are grounded,

contact a licensed electrician for advice. They must be

grounded for safe operation..

WARNING: Each wire nut (wire connector) supplied with

this fan is designed to accept up to one 12 gauge house

wire and two wires from the fan. If you have larger than 12

gauge house wiring or more than one house wire to connect

to the fan wiring, consult an electrician for the proper size

wire nuts to use..

□ Connect the ground conductor of the 120-Volt supply (this

may be a bare wire or a wire with green colored insulation)

to the green ground lead(s) (PP) of the fan.

□ Connect the fan motor white wire (MM) to the receiver (I)

white wire (MM) using a wire connecting nut (KK).

□ Connect the fan motor black wire (LL) to the receiver (I)

black wire (LL) using a wire connecting nut (KK).

□ Connect the fan motor blue wire (OO) to the receiver (I) blue

wire (OO) using a wire connecting nut (KK).

□ Connect the receiver (I) black wire (NN) to the supply black

(hot) wire (LL) using a wire connecting nut (KK).

□ Connect the receiver (I) white wire (MM) to the supply white

wire (neutral) (MM) wire using a wire connecting nut (KK).

□ After connecting the wires, spread them apart so that the

green (PP) and white wires (MM) are one side of the outlet

box (1) and the black wire (LL) is on the other side.

□ Turn the wire connecting nuts upward, and carefully push

the wiring into the outlet box (1).

On Dip

1234

Down

DPA12122002 新版 SIZE:216x280mm 80g模糙纸单黑色 28P 骑马钉 2013-4-16 第 9／28页

Installation (continued)

Attaching the canopy to the

mounting bracket

□ Remove one of the preassembled canopy screws (II) from

the end of the mounting bracket (H). Loosen, but do not

remove, the second canopy screw (II).

□ Raise the canopy (F) up to the ceiling and slide the slotted

hole in the canopy through the loosened canopy screw (II)

and twist the canopy (F) to lock it in place on the screw (II).

□ Reattach the other canopy screw (II) to the canopy (F) and

tighten both screws securely with a Phillips screwdriver.

Attaching the light kit to the fan

□ Loosen, but do not remove, two of the light kit screws (JJ)

attached to the light kit plate (1) portion of the motor (D).

□ Remove the third light kit screw (JJ) from the light kit plate

(1) portion of the motor (D).

□ Raise the light kit (J) up to the motor (D) and connect the

two wires (1) from the light kit (J) to the two wires (2) from

the motor (D). Ensure that the colors of the wires match and

that they are securely connected.

□ Tuck the wires into the motor (D), align the slots in the light

kit (J) with the loosened light kit screws (JJ), and twist to

lock in place.

□ Reinstall the previously-removed light kit screw (JJ) and

securely tighten all light kit screws (JJ) with a Phillips

screwdriver.

DPA12122002 新版 SIZE:216x280mm 80g模糙纸单黑色 28P 骑马钉 2013-4-16 第 10／28页

11 HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

Installation (continued)

Installing the bulbs and glass

shade

□ Install the two bulbs (K) into the sockets on the light kit (J).

□ Raise the glass shade (L) up to the light kit (J), align the tabs

in the light kit (J) with the slots on the shade (L) and twist

clockwise to secure the shade (L) to the light kit (J).

DPA12122002 新版 SIZE:216x280mm 80g模糙纸单黑色 28P 骑马钉 2013-4-16 第 11／28页

Operation

Setting the blade direction

Using the remote control

The slide switch (1) on the motor (D) controls the direction of the

blades: forward (switch right) or reverse (switch left).

□ Warm weather – (Forward) A downward air flow creates a

cooling effect. This allows you to set your air conditioner on

a higher setting without affecting your comfort.

□ Cool weather – (Reverse) An upward air flow moves warm

air off the ceiling area. This allows you to set your heating

unit on a lower setting without affecting your comfort.

□ (1) On/Off: Press and release immediately to turn the light

on or off.

(2) Dim: Press and hold to dim or brighten lights to the

desired level and release. (Only for the tungsten bulb.)

(3) Off: Turn off the ceiling fan.

(4) Hi:Turn on the fan at high speed.

(5) Med: Turn on the fan at medium speed.

(6) Low: Turn on the fan at low speed.

DPA12122002 新版 SIZE:216x280mm 80g模糙纸单黑色 28P 骑马钉 2013-4-16 第 12／28页

13 HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

Care and Cleaning

WARNING: Make sure the power is off at the electrical

panel box before you attempt any repairs.

□ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade

attachments twice a year. Make sure they are secure. (It is not necessary to remove the fan from the ceiling.)

□ Clean your fan periodically to help maintain its new appearance over the years. Use only a soft brush or lint-free cloth to avoid

scratching the finish. The plating is sealed with a lacquer to minimize discoloration or tarnishing. Do not use water when cleaning.

This could damage the motor, or the wood, or possibly cause an electrical shock.

□ You can apply a light coat of furniture polish to the wood blades for additional protection and enhanced beauty. Cover small

scratches with a light application of shoe polish.

□ There is no need to oil your fan. The motor has permanently lubricated bearings.

Troubleshooting

Problem Solution

The fan will not start. □ Check the main and branch circuit fuses or breakers.

□ Check the line wire connections to the fan and switch wire connections in the switch housing.

□ Check the battery in the remote control.

□ Ensure you are in the normal range of 10-20 feet.

□ Turn the power off and ensure that the dip switch settings are the same on the remote control

and receiver.

The fan is noisy. □ Ensure all motor housing screws are snug.

□ Ensure the screws that attach the fan blade bracket to the motor hub are tight.

□ Ensure the wire nut connections are not rattling against each other or the interior wall of the

switch housing.

□ Allow a 24-hour “breaking in” period. Most noises associated with a new fan disappear during

this time.

□ If you are using the Ceiling Fan light kit, ensure the screws securing the glassware are tight.

Check that the light bulbs are also secure.

□ Ensure the canopy is a short distance from the ceiling. It should not touch the ceiling.

□ Ensure your outlet box is secure and rubber isolator pads were used between the mounting plate

and outlet box.

The fan wobbles. □ Check that all blade and blade arm screws are secure.

□ Most fan wobble problems are caused when blade levels are unequal. Check this level by

selecting a point on the ceiling above the tip of one of the blades. Measure from a point on the

center of the blade to the point on the ceiling. Rotate the fan until the next blade is positioned for

measurement, and measure from the same point on each blade to the ceiling. Repeat for each

blade. Any measurement deviation should be within 1/8 in. Run the fan for ten minutes.

□ Use the enclosed blade balancing kit if the blade wobble is still noticeable.

DPA12122002 新版 SIZE:216x280mm 80g模糙纸单黑色 28P 骑马钉 2013-4-16 第 13／28页

Questions, problems, missing parts? Before returning to the store,

call Hampton Bay Customer Service

8 a.m. - 6 p.m., EST, Monday-Friday

1-877-527-0313

AMPTONBAY.COM

Retain this manual for future use.

DPA12122002 新版 SIZE:216x280mm 80g模糙纸单黑色 28P 骑马钉 2013-4-16 第 14／28页

Page is loading ...

Hampton Bay 36LGM-L User guide

Brand: Hampton Bay

Model: 36LGM-L

Category: Household fans

Type: User guide

Download PDF

report

in other languages

español: Hampton Bay 36LGM-L Guía del usuario

Hampton Bay 36LGM-L User guide

Hampton Bay 36LGM-L User guide

in other languages

Related papers

Other documents