2. Computers & electronics
  3. Networking
  4. PoE adapters
  5. Proscend
  6. 211P
211P

Proscend 211P Installation guide

  • Hello! I've read the Quick Installation Guide for the PROSCEND 211P and 221P Gigabit PoE Injectors. This document outlines the specifications, pin assignments, and LED indicators for these devices. The 211P supports up to 90 watts of power output with 1000Mbps speed, while the 221P supports up to 30 watts with 2.5Gbps speed. I'm ready to answer your questions about these PoE injectors.
  • What is the maximum output power of the 211P?
    What is the maximum output power of the 221P?
    What Ethernet compliance does the 211P support?
    What Ethernet compliance does the 221P support?
    What is indicated by the green AC LED?
    What is indicated by the green PORT LED?
211P/221P Gigabit PoE Injector
Quick Installation Guide Version: 1.00
The 211P is an IEEE 802.3bt compliant PoE Injector supporting 90 watts
maximum output power, with 1000Mbps speed. The 221P is an IEEE
802.3at complaint PoE Injector supporting 30 watts maximum output power,
with 2.5Gbps speed. Both 211P and 221P are equipped with built-in power
supply for easy installation.
Overview
Specifications
RJ45 Pin Assignments
Both 211P/221P “DATA IN” and “DATA & POWER OUT”
interfaces are standard 8-pin RJ45 connectors. The
following tables display the pinouts.
The IEEE 802.3af/at pinouts of the 211P/221P “DATA & POWER OUT”
interfaces.
Description
V+
V+
V-
Not used
Pin
1
2
3
4
IEEE 802.3af/at PoE Pinouts
Description
Not used
V-
Not used
Not used
Pin
5
6
7
8
The IEEE 802.3bt pinouts of the 211P “DATA & POWER OUT” interface.
Description
V+
V+
V-
V+
Pin
1
2
3
4
IEEE 802.3bt PoE Pinouts
Description
V+
V-
V-
V-
Pin
5
6
7
8
The MDI/MDI-X pinouts of the 211P/221P “DATA IN” and “DATA &
POWER OUT” interfaces.
Description
BI_DA+
BI_DA-
BI_DB+
BI_DC+
BI_DC-
BI_DB-
BI_DD+
BI_DD-
Description
BI_DB+
BI_DB-
BI_DA+
BI_DC+
BI_DC-
BI_DA-
BI_DD+
BI_DD-
Pin
1
2
3
4
5
6
7
8
Pin
1
2
3
4
5
6
7
8
MDI Port Pinouts MDI-X Port Pinouts
1 8
8-pin RJ45
Proscend Communications Inc. All rights reserved. www.proscend.com
Model Name
Ethernet Compliance
PoE Compliance
PoE Output Power
Power Input
211P
10/100/1000BASE-T
IEEE 802.3af/at/bt
90 watts maximum
100 ~ 240 VAC
221P
10/100/1000/2.5GBASE-T
IEEE 802.3af/at
30 watts maximum
100 ~ 240 VAC
NOTE
Please scan below QR Code to download online resources.
Download link: https://www.proscend.com/en/product/200P.html
LED Indicators
LED
PORT
AC
Color
Green
Green
On Off
PoE Power Output On
Device Power On Device Power Off
PoE Power Output Off
Power
DATA IN
DATA & POWER OUT
Connect with power cord
Connect with Ethernet network
Connect with powered device (PD)
Two LEDs on the front panel of the 211P and 221P.
Hardware Interface
211P/221P
P/N:604040000069
/