TRUE FINE TD10056C User manual

Brand: TRUE FINE

Model: TD10056C

Type: User manual

TRUE FINE TD10056C is a customizable chandelier-style light fixture that allows for easy installation and a variety of lighting configurations. With its E12 lamp socket and 60W maximum power rating, you can choose the brightness and warmth of your lighting to suit your needs. The fixture comes with all the necessary components, including a mounting strap, canopy, fixture chain, and wire nuts, for a quick and hassle-free setup.

Instruction Manual

Large Chandelier

Overview

Assembly Instruction

Wiring Instruction

Product Specifications

Input voltage 120V

Rated power 60W MAX

Lamp socket E12

Product Packaging

E-mail:[email protected]

To clean, wipe fixture with a soft cloth. Clean glass with a mild soap.

Do not use abrasive materials such as scouring pads or powders, steel

wool or abrasive paper.

1. Insert the green grounding screw into the hole with two raised

dimples on the mounting bar. Wrap the ground wire from the fixture

(if supplied) around the green grounding screw, then connect it to

ground wire from the outlet box (if not fixed on the outlet box) using a

wire connector(not supplied). If ground wire from the fixture is not

supplied, wrap the ground wire (if not fixed on the outlet box) from the

outlet box around the green grounding screw and tighten it.

4.Fix Mounting strap (J) to outlet box with Screw (I).

2.Take note of the color of the wire(s) on your fixture. Identify which

group your fixture wire(s) falls into and connect the wires according

to the directions below:

6.Connect the wires according to the picture above.

(Please refer to the wiring instruction for details )

7.Fix Canopy (H) to Mounting strap (J) with Canopy lock ring (G).

6.Connect the fixture wire from [Group B] to the white wire from the

outlet box in the same manner. Make sure no bare wires can be seen

outside wire connectors.

5.Try gently to pull the connector off the wires. If you can pull the

connector off, carefully re-do steps 3 and 4 as above, and check again

for a firm connection.

3.Take your fixture wire(s) from [Group A] and place evenly against the

black wire from the outlet box. Do NOT twist wires together before

using wire connectors.

5.Thread the wire through Canopy lock ring (G) and Canopy (H)

and hang Fixture chain (F) to Mounting strap (J).

4.Fit a wire connector over the wires and screw the connector

clockwise until you feel firmness.

1.Erect the lamp socket, and then press down the sleeve to cover

the whole lamp socket.

3..Link Loop (E) and Upper lamp body (B) by Long stem (D).

2..Link Lower lamp body (A) and Upper lamp body (B) by Short

stem (C).

Always switch off the electricity supply and allow to cool for 10 minutes

before changing the light bulbs.

Upper lamp body × 1 & Lower lamp body × 1

Fixture chain × 1

Loop × 1

Mounting strap × 1 & Canopy × 1

Screw × 2 & Wire nut × 3

Long stem × 3 & Short stem × 3

Lamp instruction × 1

Outlet box

[GROUP A]

[GROUP B]

Black

Wire nuts

Smooth

White

Green(Ground)

Bare copper wire(Ground)

Ribbed

G.Canopy lock ring

F.Fixture chain

H.Canopy

I.Screw

J.Mounting strap

NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER

SUPPLY WIRES.

[GROUP A]:

Connect to Black House Wire

[GROUP B]:

Connect to White House Wire

BLACK WHITE

*PARALLEL WIRE (round & smooth) *PARALLEL WIRE (square & ridged)

WHITE OR GREY WITH TRACER WHITE OR GREY WITHOUT TRACER

BROWN, GOLD OR BLACK

WITHOUT TRACER

BROWN, GOLD OR BLACK

WITH TRACER

Cleaning

Safety Information

Print in china

E.Loop

D.Long stem

C.Short stem

B.Upper lamp body

A.Lower lamp body

Warmly Reminder: prior to installation, please do a simple test to make

sure every light can be lit on. If you find any lights not on, please do not

install, return it and request for new one

TRUE FINE TD10056C User manual

TRUE FINE TD10056C User manual

TRUE FINE TD10056C User manual

Related papers

Other documents