TRUE FINE TD10021C User manual

Brand: TRUE FINE

Model: TD10021C

Type: User manual

TRUE FINE TD10021C is a versatile lighting fixture designed to elevate the ambiance of any room. With its E12 lamp socket, it supports a wide range of bulbs, allowing you to customize the brightness and warmth of the light to suit your preferences. The fixture features a sturdy mounting strap for secure installation and comes with all the necessary hardware for easy assembly. The product is rated for a maximum power of 60W and operates on a standard input voltage of 120V. Please refer to the instruction manual for detailed wiring instructions and safety information.

Instruction Manual

Large Chandelier

Overview

Assembly Instruction

Wiring Instruction

Product Specifications

Input voltage 120V

Rated power 60W MAX

Lamp socket E12

Product Packaging

E-mail:[email protected]

To clean, wipe fixture with a soft cloth. Clean glass with a mild soap.

Do not use abrasive materials such as scouring pads or powders, steel

wool or abrasive paper.

1. Insert the green grounding screw into the hole with two raised

dimples on the mounting bar. Wrap the ground wire from the fixture

(if supplied) around the green grounding screw, then connect it to

ground wire from the outlet box (if not fixed on the outlet box) using a

wire connector(not supplied). If ground wire from the fixture is not

supplied, wrap the ground wire (if not fixed on the outlet box) from the

outlet box around the green grounding screw and tighten it.

4.Fix Mounting strap (L) to outlet box with Screw (K).

2.Take note of the color of the wire(s) on your fixture. Identify which

group your fixture wire(s) falls into and connect the wires according

to the directions below:

6.Connect the wires according to the picture above.

(Please refer to the wiring instruction for details )

7.Fix Canopy (J) to Mounting strap (L) with Canopy lock ring (I).

6.Connect the fixture wire from [Group B] to the white wire from the

outlet box in the same manner. Make sure no bare wires can be seen

outside wire connectors.

5.Try gently to pull the connector off the wires. If you can pull the

connector off, carefully re-do steps 3 and 4 as above, and check again

for a firm connection.

3.Take your fixture wire(s) from [Group A] and place evenly against the

black wire from the outlet box. Do NOT twist wires together before

using wire connectors.

5.Thread the wire through Canopy lock ring (I) and Canopy (J)

and hang Fixture chain (H) to Mounting strap (L).

4.Fit a wire connector over the wires and screw the connector

clockwise until you feel firmness.

1.Erect the lamp socket, and then press down the sleeve to cover

the whole lamp socket.

3..Link Top box (F) and Upper lamp body (B) by Long stem (D) and

Hook (C), then screw Loop (G) to Top box (F).

2..Link Lower lamp body (A) and Upper lamp body (B) by Short

stem (C) and Hook (E).

Always switch off the electricity supply and allow to cool for 10 minutes

before changing the light bulbs.

Upper lamp body × 1 & Short lamp body × 1

Fixture chain × 1

Top box × 1

Mounting strap × 1 & Canopy × 1

Screw × 2 & Wire nut × 3

Long stem × 3 & Short stem × 3

Hook × 12

Lamp instruction × 1

Outlet box

[GROUP A]

[GROUP B]

Black

Wire nuts

Smooth

White

Green(Ground)

Bare copper wire(Ground)

Ribbed

I.Canopy lock ring

H.Fixture chain

J.Canopy

K.Screw

L.Mounting strap

NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER

SUPPLY WIRES.

[GROUP A]:

Connect to Black House Wire

[GROUP B]:

Connect to White House Wire

BLACK WHITE

*PARALLEL WIRE (round & smooth) *PARALLEL WIRE (square & ridged)

WHITE OR GREY WITH TRACER WHITE OR GREY WITHOUT TRACER

BROWN, GOLD OR BLACK

WITHOUT TRACER

BROWN, GOLD OR BLACK

WITH TRACER

Cleaning

Safety Information

Print in china

G.Loop

F.Top box

E.Hook

D.Long stem

C.Short stem

B.Upper lamp body

A.Lower lamp body

TRUE FINE TD10021C User manual

Brand: TRUE FINE

Model: TD10021C

Type: User manual

Download PDF

report

TRUE FINE TD10021C User manual

TRUE FINE TD10021C User manual

Related papers

Other documents