2. Ortech
  3. 4110-3CCT
4110-3CCT

Ortech 4110-3CCT, 4112-3CCT, 4116-3CCT User manual

  • Hello! I'm your assistant and I've reviewed the Instruction Manual for the ORTECH LED Flush Mount models 4110-3CCT, 4112-3CCT, and 4116-3CCT. This document outlines important safety information, like the requirement for professional installation and the need to disconnect power before any work. It details the suitable operating environment, including being safe for damp locations, plus the steps for surface mounting installation. I'm ready to answer your questions about these LED lights.
  • Can LED Flush Mounts be used in damp locations?
    Who should install the LED Flush Mounts?
    What should be done before installation or maintenance?
    What type of electrical circuit should be used?
    What is the reliable operating temperature for this fixture?
WARNING
LED Flush Mounts
MODEL 4110-3CCT / 4112-3CCT / 4116-3CCT
1.WARNING: Risk of fire.
2.Before installing your lighting fixture, thoroughly review enclosed installation manual. If you do not have sufficient electrical wiring experience, please refer
to a do-it-yourself wiring handbook or have your fixture installed by a qualified licensed electrician. All electrical connections must be in a accordance with
local standards. Reliable operating temperature is -20 to +40 degrees.
3.Please obey fire prevention regulations, do not cover the fixture with any heat insulated materials.
4.Do not change the LED light source or driver inside under any circumstance.
INSTALLATION GUIDE
WARNING — THE INSTALLATION MUST BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.
1. LED Flush Mounts are suitable for using in damp locations
2. Please keep the LED Flush Mounts away from any corrosive substance, and please use
dry cloth when you clean it
3. LED Flush Mounts can only be installed by a qualified electrician
4. Before installation or maintenance, please disconnect the power to prevent electric shock
Instruction Manual
1-888-543-6473
1-888-541-6474
13376 Comber Way
Surrey BC V3W 5V9
[email protected]
www.ortechindustries.ca
205 Summerlea Rd
Brampton, ON L6T 4E5
CAUTION
Application Notice
1. Turn OFF the power supply at the fuse or circuit breaker box before you install the fixture
2. Ground the fixture to avoid potential electric shocks and to ensure reliable starting
3. Double-check all connections to be sure they are tight and correct
4. Wear rubber soled shoes and work on a sturdy wooden ladder
5. This fixture is designed for use in a circuit protected by a fuse or circuit breaker. The fixture is also designed to be installed in accordance with local
electrical codes. If you are unsure about your wiring, consult a qualified electrician or local electrical inspector, and check your local electrical code
6. WARNING — RISK OF CUTS: Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts
7. WARNING — RISK OF FIRE: Use 120V AC 50/60Hz circuits
8. DO NOT change the LED light source or driver inside under any circumstance
9. DO NOT cover the fixture with any heat insulated materials
Surface Mounting Installation
ORTECH reserves the right to modify at any time, without notice, any or all of our product's
features, designs, components and specifications to meet market changes.
/