Bluetooth Module
Quick Installation Guide
Technical Data
Input Voltage
Self-Consumption
Size (Width* Height*Depth)
Operating Temperature Range
Operating Altitude
Protection Degree
Installation
Transmission Rate
Frequency Range
Connection Distance
Bluetooth Module
5V
0.3W
67.5mm*24mm*11mm
-25℃~60℃
＜4000m
IP20
Plug Type
UART: 115200bps
2.402GHz - 2.480GHz
≤10m
Insert the Bluetooth into the COM port (USB-type communication port).
01 Technical Data
02 Installation
01 Technical Data
04 Commissioning
1. Make sure the Bluetooth indicator (yellow) is double flashing.
Attention: When plugging the module, press the RESET button to recognize the module.
2. Turn on the Bluetooth function on your smart phone.
Attention: The Bluetooth module is designated for inverter's commissioning. Please remove Bluetooth
module as commissioning finished, as it is not waterproof.
4.1 LGES PV Master for hybrid inverter
4.2 Download and install the LGES PV Master.
4.3 Bluetooth Configuration
LGES PV Master
LGES PV Master
play
App Store
********
Open the LGES PV Master App and follow the steps below to complete commissioning.
Step3: Pull to refresh the inverter list on Device List page. Connect to the right device by selecting the
device name SOL-BLE**.
Note: *represents the last eight digits of inverter's SN.
Step4: To make sure inverter Bluetooth is connected to your smart phone successfully, please make sure
the system parameters shows up on Overview page.
Step1: Click "+ Connect Device".
Step2: Click "Inverter with Bluetooth".
1
2
3
4
340-00621-01
LG Energy Solution Australia Pty Ltd
Unit 12, 35 Dunlop Rd, Mulgrave, VIC 3170
T: 1300 178 064 [AEST Business hours]
www.lghomebattery.com/au
/