Instructions
8
1.Turn on the power, then touch “ ” button to select the corresponding
function and touch “ ” button to let the appliance run for preheating.
2.After the preheating is completed,
the appliance will beep and display
"ADD", hold the top of the
appliance with one hand, and pull
the basket out by holding the
handle of the basket with the other
hand. The basket must be placed
on an even surface.
3.Put the ingredients in the inner
basket.
4.Push the frying basket into the appliance, after the appliance is powered on,
select your desired function and it will show the default time and temperature.
Adjust where needed and touch " " to start.
Note: When the basket is not thoroughly pushed
in, the micro switch is not triggered; the appliance is at
the power-off state of getting the basket and it won’t work.
At that time, you only need to totally push the frying
basket into the appliance. If the basket is removed during
cooking, the appliance will switch off and resume cooking
when the basket is put back into the appliance.
5. After reaching half of the set heating, the appliance beeps 3 times, you can
pull out the basket and turn food if required.
6.The appliance will beep when the timer has finished counting down.
Instructions for use
Please carefully take it out. Do put it on the desk flatwise so as to avoid
being scalded by steam or topping over the frying barrel which may lead to
scalding by oil or high temperature food. In addition, the auxiliary tools (such
as chopsticks) are suggested to be used in the process of taking out food.