INSTALLATION& USAGE GUIDE
Note:
This instruction contains important safety information. Please read and
keep for future reference.
Manual Recliner Sofa with Massage and Heat(6303C)
Cautions
1. Please read this manual before operating this equipment.
2. NOTE: Please use this equipment according to the instructions in this
brochure to avoid accidents.
3. Keep children and pets away from the sofa during the
operation. Unplug the power cord during a thunderstorm or if you do
not intend to use for a long time.
4. Please DO NOT disassemble or repair the equipment by uncertified
personnel to avoid the failure or damage of product or electric shock to
the human body.
5. Please DO NOT place anything under the sofa when lower down the
sofa.
NO. P
ART NAME
A Backrest
B Arm pad
C Seat
D
Massage remote
control board
E P
ower cable
ART NAME
IMAGE
Q
1
2
1
Massage remote
control board
1
ower cable
1
Q
ty(pcs)
1
2
1
1
1
A
B
C
INSTALLATION
Step 1:
Please insert A to C, make sure that the metal part on A can be
completely inserted into the metal part on C (Please see details).
Push hard until you feel or hear backrest snap into place.
Step 2:
Please install two pieces of armpad B through zipper to the right and
left side of C.(Please see details).
Step 3:
There are four sockets on backrest A,two sockets on seat C.
Please connect red one from A to the red one from C
Then connect white one from A to the white one from C
The rest two are for massage and power. Please connect those two to D
and E separately.
Congratulations! You are awesome, all the assembly is over here.
Please find the usage guide next page.
USAGE GUIDE
For massage & heat function
1. Press the ON/OFF button to switch the massage unit on. The
massage unit will start in Mode 1 and will automatically shut down
after 15 minutes if no other button is pressed. Press the ON/OFF
button again whilst in the massage mode to switch off the unit.
2. Press the HEAT button to switch the heat function on. The HEAT
light will be lit when this function is on. Press the HEAT button again
to switch the heat function off.
For recline function
1. While seated, reach the right side of the sofa to find the
3. Press the MODE button to select the massage mode.The
current massage mode is shown by one of the five MODE light being
illuminated.
4. Press the INTENSITY button to increase the intensity of the
massage vibrations. After pressing the button, the new intensity will
be shown momentarily by illuminating of the INTENSITY lights.
Once the intensity is at maximum, pressing the button again will reset
the intensity to its lowest level.
handle and pull. lean back hard, the backrest will lie down and
footrest can be extended that allows you to stretch your body.
2. Sit upright, retracted footrest with your feet until you feel or hear
footrest snap into place.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Synca Wellness JP1100 User guide
-
Osaki OS6000 User manual
-
Brookstone Renew User manual
-
-
Infinity Escape Massage Chair Owner's manual
-
-
-
-
-
Cozzia CZ-628 Owner's manual
