Motorola ME5050 is a digital cordless telephone with a caller ID feature. It allows you to access a call waiting line and hold or transfer calls when using a PABX line. The handset has an alphanumeric keypad and a backlit display. It operates with two standard AAA rechargeable batteries.
![](//vs1.manuzoid.com/store/data-gzf/268f104c4ae48e9bc2d43d7c720e637b/2/001820013.htmlex.zip/bg1.jpg)
User's Guide
Digital 1.8 GHz
DIGITAL CORDLESS
TELEPHONE
WITH *CALLER ID
Model ME5050/ME5050A
Series
MOTOROLA and the Stylized M Logo are registered in the US Patent &T
property of their respective owners. © Motorola, Inc. 2006.
![](//vs1.manuzoid.com/store/data-gzf/268f104c4ae48e9bc2d43d7c720e637b/2/001820013.htmlex.zip/bg2.jpg)
Alphanumeric keypad
R (Flash)
![](//vs1.manuzoid.com/store/data-gzf/268f104c4ae48e9bc2d43d7c720e637b/2/001820013.htmlex.zip/bg3.jpg)
Access a Call Waiting Line /
Holding and transferring calls (PABX)
Changing the Handset Volume
![](//vs1.manuzoid.com/store/data-gzf/268f104c4ae48e9bc2d43d7c720e637b/2/001820013.htmlex.zip/bg5.jpg)
.&"XJUI#BDLMJHIU
![](//vs1.manuzoid.com/store/data-gzf/268f104c4ae48e9bc2d43d7c720e637b/2/001820013.htmlex.zip/bg6.jpg)
CAUTION : PLEASE DO NOT USE ALKALINE OR NON-
RECHARGEABLE BATTERIES. IT MAY CAUSE PERMANENT
DAMAGE TO THE UNIT AND VOID THE WARRANTY.
Insert the 2 x AAA (600mAh/1.2V) Ni-MH re-chargeable batteries
supplied, observing the correct polarity.
Replace the cover on the battery compartment, Place the handset in the base station.
For fully discharged batteries, the handset will power on after a 15-minute precharge.
![](//vs1.manuzoid.com/store/data-gzf/268f104c4ae48e9bc2d43d7c720e637b/2/001820013.htmlex.zip/bg7.jpg)
Caller ID on Call Waiting
(dependent on network)
*
*
+
+
* user must subscribe to the network's caller id service.
+ more then one handset required.
Programmable call block
Operation with 2 standard AAA
re-chargeable batteries
Standards
Backlight display(only for ME5050A)
![](//vs1.manuzoid.com/store/data-gzf/268f104c4ae48e9bc2d43d7c720e637b/2/001820013.htmlex.zip/bg8.jpg)
.FOVCVUUPO
*OEJDBUFTUIFCBUUFSZDIBSHFTUBUVTMFWFM
/PCBSTXIFOCBUUFSZJTFNQUZ
*OEJDBUFTJGZPVIBWFVOBOTXFSFEDBMMT
%FUBJMTBWBJMBCMFJOUIFDBMMTMJTU
*OEJDBUFTUIBUUIFLFZQBEMPDLJTPO
.JDSPQIPOFJTNVUFE
3JOHFSJTTXJUDIFEPGG
*OEJDBUFTUIFIBOETFUJTSFHJTUFSFEUPUIFCBTF
4DSPMM61PS%08/UPTFFGVSUIFSEFUBJMT
PGUIFFOUSZ
0OMZTVQQMJFEXJUI
.VMUJIBOETFUQBDL
DPNNVOJDBUJPODPOUBDU
![](//vs1.manuzoid.com/store/data-gzf/268f104c4ae48e9bc2d43d7c720e637b/2/001820013.htmlex.zip/bg9.jpg)
POR TUGUES
![](//vs1.manuzoid.com/store/data-gzf/268f104c4ae48e9bc2d43d7c720e637b/2/001820013.htmlex.zip/bga.jpg)
(only for ME5050A)
#BDLMJHIU
CBDLMJHIU
![](//vs1.manuzoid.com/store/data-gzf/268f104c4ae48e9bc2d43d7c720e637b/2/001820013.htmlex.zip/bgc.jpg)
Note: If several handsets are registered on the base station and a call should be put on
hold or transferred, press the key instead of .
Access a Call Waiting Line / Holding and transferring calls (PABX)
When on an external call, press key to access a Call Waiting Line when you hear
the call waiting prompt signal. Press key again to toggle between the two calls.
When on an external call (PABX line)
1. Press key to put the call on hold.
2. Dial the number of the extension.
3. Press key again if you would like to take back the call, or to transfer the call.
![](//vs1.manuzoid.com/store/data-gzf/268f104c4ae48e9bc2d43d7c720e637b/2/001820013.htmlex.zip/bg10.jpg)
P age
![](//vs1.manuzoid.com/store/data-gzf/268f104c4ae48e9bc2d43d7c720e637b/2/001820013.htmlex.zip/bg11.jpg)
DISABLE or EXTERNAL .
![](//vs1.manuzoid.com/store/data-gzf/268f104c4ae48e9bc2d43d7c720e637b/2/001820013.htmlex.zip/bg13.jpg)
EVSJOHBDBMM
&YUFOTJPO/VNCFS
"DDFTT$BMM8BJUJOH-JOF
)PME5SBOTGFSDBMM1"#9
![](//vs1.manuzoid.com/store/data-gzf/268f104c4ae48e9bc2d43d7c720e637b/2/001820013.htmlex.zip/bg14.jpg)
Press and hold P age key of Base for 2 seconds