2. Astria Fireplaces
  3. ELDV

Astria Fireplaces ELDV, ELDV-35/40/45 Instruction Sheet

  • Hello! I've reviewed the installation instructions for the Firebox Pinecone Kit (FPCK). This document provides guidance on how to use the included lava rock, wood chips, and pinecone to enhance the look of your gas fireplace, with specific placement instructions to ensure safe operation. I'm ready to answer any questions you have about the kit and its use.
  • What materials are included in the FPCK kit?
    Where can the materials from the kit be placed?
    Is it safe to place the wood chips in contact with logs?
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE
P/N 750229M Rev. A 05/2015
HEARTH PRODUCTS
KITS AND ACCESSORIES
FIREBOX PINECONE KITS
1
P750229M
INSTALLATION INSTRUCTIONS FOR FIREBOX PINECONE KITS
(MODEL: FPCK) FOR USE WITH GAS FIREPLACES
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
INSTALLATION INSTRUCTIONS FOR FIREBOX PINECONE KITS
(MODEL: FPCK) FOR USE WITH LENNOX GAS FIREPLACES
FIREBOX PINECONE KITS
HEARTH PRODUCTS
KITS AND ACCESSORIES
750,229M
09/2006
Printed in U.S.A. © 2006 by LHP
P/N 750,229M REV. N/C 09/2006
Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products.
Consult your local distributor for fireplace code information.
LHP
1110 West Taft Avenue
Orange, CA 92865
INSTALLATION INSTRUCTIONS
The contents of the FPCK kit (Catalog No. 91L05) are designed to be used to enhance the realistic look of the log set within the
firebox opening. The kit consists of Lava Rock, a set of ceramic fiber detailed "wood" chips and a ceramic fiber "pinecone". These
materials can be placed according to taste in any location within the firebox, except on top of the burner.
The Lava Rock can be spread along the firebox floor in clumps or evenly. The Lava Rock may be added to any firebox floor
materials that come standard with the firebox.
Place the "wood" chips along the firebox floor as desired. These "wood" chips may be placed in contact with the logs, as long as
they do not impinge the flames, or be positioned where they may fall into the flames.
Position the "pinecone" in view in front of the logs.
NOTE: DO NOT place any materials from this kit on the burner, or allow any of the materials from this kit to impinge the flames in
any way.
Printed in U.S.A. © 2015 INNOVATIVE HEARTH PRODUCTS LLC
P/N 750229M Rev. A 05/2015
Innovative Hearth Products
1508 Elm Hill Pike, Suite 108
Nashville, TN 37210
IHP.US.COM
Innovative Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications,
prices and also to discontinue colors, styles and products. Consult your local distributor for fireplace code information.
/