Dorel Home 4292149 Assembly Manual

Brand: Dorel Home

Model: 4292149

Category: AV equipment stands

Type: Assembly Manual

This manual is also suitable for

4291049

Dorel Home 4292149 is an Upholstered Bed with Storage. It has a weight limit of 500 lb / 227 kg for the bed and 40 lb / 18 kg for the drawer. The bed comes with a Limited 1 Year Warranty.

The bed is part of the Dorel Home line of products, which are known for their quality and durability. The bed is made of high-quality materials and is built to last.

The bed has a number of features that make it a great choice for any bedroom. The bed has a storage drawer that is perfect for storing extra bedding, pillows, or other items. The drawer is easy to open and close, and it has a stop to prevent it from rolling out too far.

Dorel Home 4292149 is an Upholstered Bed with Storage. It has a weight limit of 500 lb / 227 kg for the bed and 40 lb / 18 kg for the drawer. The bed comes with a Limited 1 Year Warranty.

The bed is part of the Dorel Home line of products, which are known for their quality and durability. The bed is made of high-quality materials and is built to last.

Date of Purchase

Upholstered Bed with Storage

Lot Number (TAKEN FROM CARTON)

Thank you for purchasing from DHP!

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY

INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

VN. - 2022/02/09

King

Weight Limit:

Bed: 500 lb / 227 kg

Drawer 40 lb / 18 kg

B34429214901 - 36213705

Questions, concerns, missing parts?

CONTACT OUR CUSTOMER SERVICE DEPARTMENT

BEFORE RETURNING PRODUCT TO THE RETAILER.

If parts are missing or damaged, we will gladly ship your

replacement parts free of charge.

Visit www.dhpfurniture.com/eng/replacement-parts

or call Toll-Free 1-800-267-1739.

You can also chat with us at www.dhpfurniture.com

4291049 (Black Faux Leather)

4292149 (White Faux Leather)

1-800-267-1739

Monday to Friday

Saturday

Sunday

DHP Consumer Services

12345 Albert Hudon, Suite 100,

Montreal, Quebec H1G 3L1

cs@dhpfurniture.com

Read Before Beginning Assembly

●Work in a spacious area and near where the unit will be used, preferably on a

carpet, or use a piece of the cardboard packaging to protect your floor and product.

●Make sure all parts are included. Most parts are labeled or stamped on the raw

edge.

●Read each step carefully. It is very important that each step of the instructions is

performed in the correct order. If these steps are not followed in sequence,

assembly difficulties will occur.

●This product may contain small components. Please ensure that they are kept

away from small children.

●This product is designed for home use and is not intended for commercial use.

For help with assembly, identifying parts, product information or to order parts,

please contact us:

Limited 1 year Warranty

DHP warrants this product to be free from defects in material and workmanship

and agrees to remedy any such defect. This warranty covers one year from the

date of original purchase from authorized retailers. This is solely limited to the

repair or replacement of defective parts and assembly labor is not included.

This warranty does not apply to any product which has been improperly

assembled, subjected to misuse or abuse or which has been altered or repaired in

any way.The warranty does not cover wearing, tearing, fading or splitting of the

fabric (where applicable). Liability for consequential damages is excluded to the

extent exclusion is permitted by law. This warranty gives you specific legal rights

and you may also have other rights which vary from state to state or province to

province.

To obtain warranty service, purchaser must present original bill of sale.

Components repaired or replaced are warranted through the remainder of the

original warranty period only. The defective components will be repaired or

replaced without charge, subject to the terms and conditions described above.

Visit www.dhpfurniture.com to view the limited warranty valid in the U.S. and

Canada.

9 am to 9 pm (Eastern Time)

10 am to 6:30 pm (Eastern Time)

11 am to 7 pm (Eastern Time)

Do NOT use

powertools

Chat

with us! www.dhpfurniture.com

1.5 hour

This product is shipped in 2 cartons

PARTS

PARTS LIST

HEADBOARD

X 1 PC

BACK PANEL

X 1 PC

FOTTBOARD

X 1 PC

SIDE RAIL

X 2 PCS

CENTER RAIL

X 2 PCS

CROSS RAIL

X 1 PC

SIDE TUBE

X 4 PCS

SUPPORT RAIL

X 2 PCS

SUPPORT LEG

X 4 PCS

WOODEN SLATS

X 39 PCS

PART NUMBERS

PART LABELS

4291049

(Black Faux Leather)

4292149

(White Faux Leather)

T1019890

T1017420

T1019450

T1019900

T1017430

T1019470

T1019480

T1019490

T1019500

T1019510

T1019520

T1013900

Each part has a unique part number.

Please reference the appropriate part

number when contacting customer

service for replacement parts.

Before throwing any packaging, please

verify all contents and make sure you

have received all the parts listed above!

AA1 E F

GP1

H K

PARTS LIST

SINGLE SLAT CAP

X 26 PCS

DOUBLE SLAT CAP

X 26 PCS

FRONT PANEL

X 4 PCS

DRAWER BOTTOM PANEL

X 4 PCS

DRAWER BACK PANEL

X 4 PCS

DRAWER SIDE PANEL

X 4 PCS

DRAWER SIDE PANEL

X 4 PCS

CASTER

X 20 PCS

Each part has a unique part number.

Please reference the appropriate part

number when contacting customer

service for replacement parts.

Before throwing any packaging, please

verify all contents and make sure you

have received all the parts listed above!

PART NUMBERS

PART LABELS

4291049

(Black Faux Leather)

4292149

(White Faux Leather)

T1013930

T1013940

T1019930

T1017470

T1019190

T1019200

T1019210

T1019220

T1019230

X Y C L M

N S Q

Please do not completely tighten all the hardware,

until the entire assembly is complete, unless

otherwise indicated in the step-by-step instructions.

The screw(s), bolt(s) to be used at each step are shown

in actual size in the lower right corner of the page.

Hardware Pack

4291049 (Black Faux Leather)

4292149 (White Faux Leather) HP # : T4155449-00

HARDWARE LIST

BOLT

X 26 PCS

BOLT

X 4 PCS

WASHER

X 4 PCS

BOLT

X 8 PCS

ALLEN KEY

X 1 PC

BOLT

X 8 PCS

BOLT

X 24 PCS

BOLT

X 56 PCS

BOLT

X 8 PCS

1/4’’ x 3/4’’ 1/4’’ x 3/4’’ 1/4’’ 1/4’’ x 1 9/16’’ 4 mm

6789

4321

3/16’’ x 3/8’’ 3/16’’ x 7/8’’ 3/16 x 3/4’’ 1/4’’ x 1/2’’

Step 1

Stịck back panel A1 to the back of

Headboard A with Velcro as Illustrated.

Step 2

Attach Guide H X 4 to Headboard A and

Footboard B with bolts ❾.

X 8

Step 3

Attach support rail J to side rail E with

bolts ❶.

Repeat the same procedure for remaining

part J and E.

X 6

Step 4

Attach support leg K X 2 to center rail F

with bolts ❶ as shown.

Repeat the same procedure for remaining

part K X 2 and F.

X 8

Step 5

Attach center rails F X 2 to Headboard A

and Footboard B with bolts ❶.

Attach side rails E X 2 to Headboard A

and Footboard B with bolts .

X 8

Step 6

Attach cross rail G to support rails J x 2

with bolts ❶

X 4

Step 7

7.1 Insert slat P1 into single slat cap X,

7.2 Press single slat cap X into side rails

E, repeat the same procedure for the

opposite side of the bed with a new slat

P1 and single slat cap X.

Repeat the same procedures going

backwards for every row of slats.

Step 8

8.1 Insert double slat cap Y x 2 onto the

ends of slat P1 assembled in previous step;

8.2 Take a new slat P1 and insert both

ends into the other free end of double slat

cap Y x 2, then press double slat cap Y x 2

SIMULTANEOUSLY into center rails F x 2

as illustrated.

Repeat the same procedures going

backwards for every row of slats.

Step 9

Attach drawer back panel M to drawer

side panels S and N with bolts .

Don’t completely tighten the bolts until

STEP 12 is completed.

Make sure that these holes are all located on

the top side before assembling.

For better performance, please orient the

plastic sheet towards inside of the drawer.

X 4

X 16

Step 10

Attach caster Q to drawer bottom panel L

with bolts .

X 8

Step 11

11.1 Attach caster Q X 4 and drawer

bottom panel L to drawer side panels S

and N with bolts .

11.2 Attach drawer bottom panel L to drawer

back panel M with bolt .

X 8

X 32

Step 12

Attach the sub-assembly L/S/N/M from

previous step to front panel C with bolts .

Then, properly tighten all the bolts.

X 24

Step 13

Attach bolts and washers as shown.

2 3

X 4

Step 14

Align Drawers with the bed frame and push

them into the bed.

Lock drawers by slightly lifting drawer and

inserting the Pin into the Slot.

Page is loading ...

Dorel Home 4292149 Assembly Manual

Brand: Dorel Home

Model: 4292149

Category: AV equipment stands

Type: Assembly Manual

This manual is also suitable for

4291049

Dorel Home 4292149 is an Upholstered Bed with Storage. It has a weight limit of 500 lb / 227 kg for the bed and 40 lb / 18 kg for the drawer. The bed comes with a Limited 1 Year Warranty.

The bed is part of the Dorel Home line of products, which are known for their quality and durability. The bed is made of high-quality materials and is built to last.

Download PDF

report