American Standard 2282.010 User manual

Brand: American Standard

Model: 2282.010

Type: User manual

M53

To Be Specied:

❏ Color: ❏ White ❏ Bone

❏ Seat: Olsonite #126-CC open front seat less cover

❏ Seat: Church #1580C open front seat less cover

❏ Alternate Seat:

❏ Flush Valve

❏ American Standard Selectronic™ #6065.161.002

DC Power (Top Spud)

BABY DEVORO™

ROUND FRONT FLUSH VALVE TOILET

VITREOUS CHINA

BABY DEVORO™ ROUND FRONT 10" ROUGH

❏ 2282.010

• Round front ush valve toilet

• Vitreous china

• Low-consumption (6.0 Lpf/1.6 gpf)

• Fully glazed 2" ballpass trapway

• 10" x 12" water surface area

• 10" high bowl

• 10" roughing-in

• Siphon ush action

• 2 bolt caps

• 1-1/2" top spud

• 100% factory ush tested

Component parts:

❏ 047007-0070A Inlet spud (furnished with bowl)

❏ 481310-100 Bolt caps with retainers

(furnished with bowl)

Nominal Dimensions:

603 x 318 x 254mm

(23-3/4" x 12-1/2" x 10")

Recommended working pressure – between

25 psi at valve when ushing and 80 psi static

Fixture only, less seat, bolt caps, and ush valve

Compliance Certications -

Meets or Exceeds the Following Specications:

• ASME A112.19.2 for Vitreous China Fixtures

NOTES:

TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM

BREAKER ON FLUSH VALVE, THE PLUMBER MUST VERIFY

DIMENSIONS SHOWN FOR SUPPLY ROUGHING.

FLUSH VALVE NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION

OF 254MM (10") FROM FINISHED WALL TO C/L OF OUTLET.

IMPORTANT: Dimensions of xtures are nominal and may vary within

the range of tolerances established by ANSI Standard A112.19.2. These

measurements are subject to change or cancellation. No responsibility is

assumed for use of superseded or voided pages.

102 mm

(4)

38 mm (1-1/2)

603 mm

(23-3/4)

FINISHED WALL

C/L SEAT POST HOLES

140 mm (5-1/2) CENTERS

381 mm

(15)

176 mm

(6-15/16)

254 mm

(10)

257 mm

(10-1/8)

C/L OUTLET

13 mm

(1/2)

FINISHED

FLOOR

318 mm

(12-1/2)

216 mm

(8-1/2)

C/L

254 mm

(10)

546 mm

(21-1/2)

121 mm

(4-3/4)

1-1/2"

SPUD

1" N.P.T. OR C.W.T.

SUPPLY AS REQUIRED

Revised 11/08

American Standard 2282.010 User manual

American Standard 2282.010 User manual

American Standard 2282.010 User manual

Related papers