Multibrackets 5407 M Cable Cover Floor Aluminum User manual

Hello! I've reviewed the Installation manual for the MULTIBRACKETS Floor Aluminum cable cover. This document provides instructions on how to install the aluminum cable cover, including cutting, joining, and securing it on floors or walls. The manual also highlights features like its multiple length options and grooved channels for wire routing. I'm ready to answer any questions you might have regarding this product.
What are the available lengths of the cable cover?

Can the cable cover be cut to a specific length?

How can I attach the cover to the floor?

M Cable Cover Floor Aluminum

Width: 139mm

Length: 750, 1100, 1600mm

Colors: Black

EAN: 7350105215384, 7350105215391, 7350105215407

The content of this manual is subject to change without further notice. The latest version of this

manual can be found online under the product name on the website:www.multibrackets.com

1 2

3

Removetheplasticendcapsoneachsideoftheducting.Using a flat tipped screwdriver gently pry open the cover as shown.

Using the joining piece connect

additional ductings as required.

SHARP EDGES

WATCH YOUR FINGERS

Using a hacksaw cut the ducting to desired length

(Keep the Lid Closed).

Note: Avoid cutting the jointing piece.

X-5mm (onwall)

X (onfloor)

X

X-5mm

On Wall

Re-attach the plastic end caps on each side of the ducting.

Topreventtheductingfrommoving,

attachdouble-sided tapeasrequired.

Note: Double-sidedtapeisrecommendedwhenusing

the ductingon hardfloors.

Insertthewires.

Note: Routewireswithinthegroovedchannelsinsidetheducting.

4 5

6

3b

7a

On Floor

3b

7b

On Wall

Position your ducting in the desired location.

/

Other documents