Legrand HBEM3 Operating instructions

Legrand
Brand
Legrand
Model
HBEM3
Type
Operating instructions

This manual is also suitable for

Wattstopper
®
High Bay Occupancy Sensor Mounting Bracket Extender Module
for Wet Locations
Installation Instructions • Instructions d’Installation • Instrucciones de Instalación
No: 24121 – 09/16 rev. 1
Catalog Number • Numéro de Catalogue • Número de Catálogo: HBEM3W
Country of Origin: Made in China • Pays d’origine: Fabriqué en Chine • País de origen: Hecho en China
SPECIFICATIONS
Maximum extension ..................................................................... 4.75” (120mm)
Parts included:
2 chase nipples, 2 nuts, rubber washer,
1 knockout cover
Chase nipple inner diameter .......................................................... 0.63” (16mm)
Threaded outside diameter .................................................... 0.82” (20mm)
DESCRIPTION AND OPERATION
The HBEM3W Extender Module allows
you to attach an HB3xxW series IP65
compliant occupancy sensor to the side
of a wet location light fixture.
The HBEM3W includes two chase
nipples; one for use with the HB340W
and one for all other models. One end
of the nipple snaps into the extender
housing. The other end fits into a
watertight fixture enclosure with a
standard knockout. A rubber washer
fits between the outside flange of the
nipple and the outside of the fixture. The
included nut tightens against the inside
wall of the fixture enclosure to secure the
nipple and rubber washer.
The extender module snaps apart to allow threading the wiring cable
through it and into the fixture for connection.
The extender housing is not watertight, but the inner flange rings on the
nipple and the HB3xxW housing fit into grooved rubber rings on the cable
to keep moisture from entering the fixture and sensor at those locations.
WARNING: TURN THE POWER OFF AT THE
CIRCUIT BREAKER BEFORE WIRING.
Wet location
light fixture
(supplied by others)
HB3xxW sensor
HBEM3W
Extender
housing
Chase nipple
Threaded nut
Rubber washer
INSTALLATION
Assemble the HBEM3W to the HB3xxW series sensor and to the light
fixture as shown in the illustrations.
Note the grooved rubber ring on the sensor cable. Ensure you have
selected the correct nipple for your sensor. Make sure that when the
cable is threaded through the chase nipple, the slot is seated on
either side of the flange ring inside the chase nipple, as shown
in the explolded view. When properly seated, using
moderate force you should not be able to pull the cable out
of the nipple from either end.
Slide blade under tabs located
in 3 places. Gently pry apart.
HB3xxW sensor
HBEM3W
Extender
housing
Threaded nut
(comes with sensor)
Rubber washer
Cable
Chase nipple
Chase nipple
Cable
Threaded nut
Grooved
rubber ring
Inner
flange ring
Threaded
nut
800.879.8585
www.legrand.us/wattstopper
No. 24121 – 09/16 rev. 1
© Copyright 2016 Legrand All Rights Reserved.
© Copyright 2016 Tous droits réservés Legrand.
© Copyright 2016 Legrand Todos los derechos reservados.
Wattstopper warranties its products to be free
of defects in materials and workmanship for a
period of five (5) years. There are no obligations
or liabilities on the part of Wattstopper for
consequential damages arising out of, or in
connection with, the use or performance of this
product or other indirect damages with respect
to loss of property, revenue or profit, or cost of
removal, installation or reinstallation.
Wattstopper garantit que ses produits sont
exempts de défauts de matériaux et de fabrication
pour une période de cinq (5) ans. Wattstopper
ne peut être tenu responsable de tout dommage
consécutif causé par ou lié à l’utilisation ou
à la performance de ce produit ou tout autre
dommage indirect lié à la perte de propriété, de
revenus, ou de profits, ou aux coûts d’enlèvement,
d’installation ou de réinstallation.
Wattstopper garantiza que sus productos
están libres de defectos en materiales y mano
de obra por un período de cinco (5) años. No
existen obligaciones ni responsabilidades por
parte de Wattstopper por daños consecuentes
que se deriven o estén relacionados con el
uso o el rendimiento de este producto u otros
daños indirectos con respecto a la pérdida
de propiedad, renta o ganancias, o al costo
de extracción, instalación o reinstalación.
WARRANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA
  • Page 1 1
  • Page 2 2

Legrand HBEM3 Operating instructions

Legrand
Brand
Legrand
Model
HBEM3
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers