2. CAMBRIDGE
  3. CAM5735-2WW

CAMBRIDGE CAM5735-2WW, CAM5735-1MAH, CAM5735-1SBL, CAM5735-2SBL Installation guide

  • Hello! I am an AI chatbot trained to assist you with the CAMBRIDGE CAM5735-2WW Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
MANTEL
1
REV1902
BLT-M-W-13
X5735-1BLK
X5735-1GRY
X5735-1MAH
X5735-1WHT
3
PACKAGE CONTENTS
A
B
C
D
E
F
G1
G2
H
I
J
K
L1
1
1
1
1
1
1
1
1
1
1
1
16
8
1
1
Right Trim Panel
Right Side Panel
Left Side Panel
Top Panel
Top shelf divider
Back Panel
Lower Back Panel
Bed Plate
Left Trim Panel
Top Trim Panel
Base Across Panel
Base Erect Panel
Top shelf divider
Inner Panel
PART QTY.DESCRIPTION
PART NO.
AA
BB
CC
DD
L2
1
26
26
Bolt
M4x25 Screw
M4x16 Screw
6EE
M4x12 Screw
Metal Connector
Carefully remove all pieces from the carton and make sure that you have all parts listed
(refer to parts list on page 2-3).
SS
1
Safety Chain
4
PACKAGE STEPS
1.
2.
B
A
BB
X2
AA
X2
5
PACKAGE STEPS
3.
4.
C
C
BB
X4
AA
X4
6
PACKAGE STEPS
5.
6.
E
D
E
F
D
AA
X4
AA
X4
7
PACKAGE STEPS
7.
8.
G1
G2
BB
X4
AA
X4
8
PACKAGE STEPS
9.
10.
H
I
AA
X8
9
PACKAGE STEPS
11.
12.
I
J
BB
X8
CC
X2
10
PACKAGE STEPS
13.
14.
K
K
F
L1
L1
D
CC
X8
CC
X3
DD
X4
11
PACKAGE STEPS
15.
16.Inserting the fire box X50WMEF1BLK/WHT
(1). Remove the outer glass from the fire box (Please refer to the fire box
manual ( Page 6) supplied with the fire box)
(2). Set the fire box into the mantel and secure the side trim pieces on
the mantel with screws.
L2
L2
E
CC
X3
DD
X4
EE
X6
)
12
PACKAGE STEPS
(3). Reinstall the glass pane onto the fire box.
STEP1
STEP2
13
PACKAGE STEPS
IMPORTANT - Safety Chain Installation
WARNING:
INSTALLATION:
This mantel is heavy furniture. Please be sure to correctly attach the safety chain to both the mantel and an adjacent wall.
Failure to do so can cause serious injury or death.
Assemble the mantel and place it in position
Attach one end of the chain to a wall stud using the screw included
Attach the other screw – through a link in the chain – to the center of the mantel’s top board (you may need to drill a small
starter hole). Put the screw through the chain link that allows the least amount of slack in the chain.
Carefully test that the installed chain adequately prevents tipping or tilting of the mantel.
NOTE: The chain must be as short as possible to prevent the mantel tipping forward. Do not allow slack in the chain.
/