American Standard 7455018.002 Installation guide

Category
Wall & ceiling mounts accessories
Type
Installation guide
- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2018
Thank you for selecting American Standard...
the benchmark of fine quality for over 140 years.
To ensure that your installation proceeds smoothly-please
read these instructions carefully before you begin.
RECOMMENDED TOOLS
1
M965909 (4/18)
INSTALLATION OF MOUNTING BRACKETS FOR ALL WALL MOUNTED ACCESSORIES
TOWN SQUARE
®
S
18" TOWEL BAR
24" TOWEL BAR
TOWEL RING
ROBE HOOK
TOILET PAPER HOLDER
24" TRAIN RACK
INSTALLATION
INSTRUCTIONS
7455018 Series
7455024 Series
7455190 Series
7455210 Series
7455230 Series
7455260 Series
Certied to comply with ANSI A112.18.1M
2
1
1
3
3
13/16" (21 mm)
2
LEVEL
C
L
DRILL PILOT HOLE FOR
WOOD SCREW (2) OR
1/4" DIA. HOLE FOR
ANCHOR (3)
Phillips Screwdriver
10'
Tape Measure
Electric Drill
Level
Flat Head Screwdriver
The WALL MOUNTED ACCESSORIES work best if secured to a wall stud or cross brace within the wall, using the SCREWS
(2) supplied.
If the ACCESSORY is to be installed on a tile or plaster wall, the ANCHORS (3) and SCREWS (2) should be used.
Determine desired height and location (optional) and mark a center line. Make sure the centerline is level. Using the
MOUNTING BRACKET (1) as a template, mark the two spots for the mounting holes. If MOUNTING BRACKET (1) is secured
to a stud or cross brace. drill small pilot holes for SCREWS (2).
For installations on tiled walls or drywall, use TILE ANCHORS (3) and SCREWS (2) for securing MOUNTING BRACKET (1) to
wall. Drill two 1/4" diameter holes a minimum of 1-1/4" deep. Insert the two TILE ANCHORS (3) ush with face of nished wall.
Place MOUNTING BRACKET (1) over TILE ANCHORS (3) and insert SCREWS (2) provided with a at blade screwdriver.
See illustration below.
Secure MOUNTING BRACKET (1)
to wall with SCREWS (2).
- 2 -
2
M965909 (4/18)
Refer to Step 1 for installation of MOUNTING BRACKETS (2).
Align accessory and place ACC ESSORY
ESCUTCHEON (1) onto MOUNTING
BRACKET (2) Secure accessory with
SET SCREW (3).
TOWEL RING and ROBE HOOK INSTALLATION
2
3
3
1
1
FINISHED WALL
2
3
INSTALL TOILET PAPER HOLDER
Refer to Step 1 for installation of MOUNTING BRACKETS (1). NOTE: The center line distance between the two
MOUNTING BRACKETS is 6-11/16" (190 mm). Make sure the two MOUNTING BRACKETS (1) are level.
Install the ACCESSORY ESCUTCHEONS (2) on the MOUNTING BRACKETS (1). Secure ACCESSORY
ESCUTCHEONS (2) with SET SCREW (3).
2
LEVEL
C
L
1
3
3
3
1
FINISHED WALL
2
6-11/16" (170 mm)
- 3 -
5
24" TOWEL BAR INSTALLATION
18" TOWEL BAR INSTALLATION
4
M965909 (4/18)
LEVEL
1
1
2
3
18" (457.2 mm)
3
1
FINISHED WALL
2
LEVEL
1
1
2
3
24" (609.6 mm)
3
1
FINISHED WALL
2
Refer to Step 1 for installation of MOUNTING BRACKETS (1). NOTE: The center line distance between the two
MOUNTING BRACKETS is 18" (457.2 mm). Make sure the two MOUNTING BRACKETS (1) are level.
Install the ACCESSORY ESCUTCHEONS (2) on the MOUNTING BRACKETS (1). Secure ACCESSORY ESCUTCHEONS
(2) with SET SCREW (3).
Refer to Step 1 for installation of MOUNTING BRACKETS (1). NOTE: The center line distance between the two
MOUNTING BRACKETS is 24" (609.6 mm) . Make sure the two MOUNTING BRACKETS (1) are level.
Install the ACCESSORY ESCUTCHEONS (2) on the MOUNTING BRACKETS (1).
Secure ACCESSORY ESCUTCHEONS (2) with SET SCREW (3).
- 4 -
6
7
DO: CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
24" TRAIN RACK
CARE INSTRUCTIONS:
LEVEL
1
1
2
3
24" (609.6 mm)
3
1
FINISHED WALL
2
Refer to Step 1 for installation of MOUNTING BRACKETS (1).
NOTE: The center line distance between the two
MOUNTING BRACKETS is 24" (609.6 mm) .
Make sure the two MOUNTING BRACKETS (1) are level.
Install the ACCESSORY ESCUTCHEONS (2) on the MOUNTING BRACKETS (1).
Secure ACCESSORY ESCUTCHEONS (2) with SET SCREW (3).
M965909 (4/18)
TOWEL RING
7455.190
TOILET PAPER HOLDER
7455.230
18" TOWEL BAR
7455.018
24" TRAIN RACK
7455.260
24" TOWEL BAR
7455.024
ROBE HOOK
7455.210
M970516-0070A
MOUNTING KIT
M970516-0070A
MOUNTING KIT
M965909 (4/18)
MODEL NUMBERS
7455018 Series
7455024 Series
7455190 Series
7455210 Series
7455230 Series
7455260 Series
TOWN SQUARE
®
S
18" TOWEL BAR
24" TOWEL BAR
TOWEL RING
ROBE HOOK
TOILET PAPER HOLDER
24" TRAIN RACK
HOT LINE FOR HELP
For toll-free information and answers to your questions, call:
1 (800) 442-1902
Mon. - Fri. 8:00 a.m. to 8:00 p.m. EST
Saturday 10:00 a.m. to 4:00 p.m. EST
IN CANADA 1-800-387-0369
(TORONTO 1-905-306-1093)
Weekdays 8:00 a.m. to 7:00 p.m. EST
IN MEXICO 01-800-839-1200
Replace the “YYY” with
appropriate finish code
POLISHED CHROME 002
POLISHED NICKEL 013
BRUSHED NICKEL 295
LEGACY BRONZE 278
- 5 -
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

American Standard 7455018.002 Installation guide

Category
Wall & ceiling mounts accessories
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI