American Standard 7455210.295 Installation guide

American Standard
Brand
American Standard
Model
7455210.295
Category
Wall & ceiling mounts accessories
Type
Installation guide
- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2018
Thank you for selecting American Standard...
the benchmark of fine quality for over 140 years.
To ensure that your installation proceeds smoothly-please
read these instructions carefully before you begin.
RECOMMENDED TOOLS
1
M965909 (4/18)
INSTALLATION OF MOUNTING BRACKETS FOR ALL WALL MOUNTED ACCESSORIES
TOWN SQUARE
®
S
18" TOWEL BAR
24" TOWEL BAR
TOWEL RING
ROBE HOOK
TOILET PAPER HOLDER
24" TRAIN RACK
INSTALLATION
INSTRUCTIONS
7455018 Series
7455024 Series
7455190 Series
7455210 Series
7455230 Series
7455260 Series
Certied to comply with ANSI A112.18.1M
2
1
1
3
3
13/16" (21 mm)
2
LEVEL
C
L
DRILL PILOT HOLE FOR
WOOD SCREW (2) OR
1/4" DIA. HOLE FOR
ANCHOR (3)
Phillips Screwdriver
10'
Tape Measure
Electric Drill
Level
Flat Head Screwdriver
• The WALL MOUNTED ACCESSORIES work best if secured to a wall stud or cross brace within the wall, using the SCREWS
(2) supplied.
• If the ACCESSORY is to be installed on a tile or plaster wall, the ANCHORS (3) and SCREWS (2) should be used.
• Determine desired height and location (optional) and mark a center line. Make sure the centerline is level. Using the
MOUNTING BRACKET (1) as a template, mark the two spots for the mounting holes. If MOUNTING BRACKET (1) is secured
to a stud or cross brace. drill small pilot holes for SCREWS (2).
• For installations on tiled walls or drywall, use TILE ANCHORS (3) and SCREWS (2) for securing MOUNTING BRACKET (1) to
wall. Drill two 1/4" diameter holes a minimum of 1-1/4" deep. Insert the two TILE ANCHORS (3) ush with face of nished wall.
Place MOUNTING BRACKET (1) over TILE ANCHORS (3) and insert SCREWS (2) provided with a at blade screwdriver.
See illustration below.
• Secure MOUNTING BRACKET (1)
to wall with SCREWS (2).
- 2 -
2
M965909 (4/18)
• Refer to Step 1 for installation of MOUNTING BRACKETS (2).
Align accessory and place ACC ESSORY
ESCUTCHEON (1) onto MOUNTING
BRACKET (2) Secure accessory with
SET SCREW (3).
TOWEL RING and ROBE HOOK INSTALLATION
2
3
3
1
1
FINISHED WALL
2
3
INSTALL TOILET PAPER HOLDER
• Refer to Step 1 for installation of MOUNTING BRACKETS (1). NOTE: The center line distance between the two
MOUNTING BRACKETS is 6-11/16" (190 mm). Make sure the two MOUNTING BRACKETS (1) are level.
• Install the ACCESSORY ESCUTCHEONS (2) on the MOUNTING BRACKETS (1). Secure ACCESSORY
ESCUTCHEONS (2) with SET SCREW (3).
2
LEVEL
C
L
1
3
3
3
1
FINISHED WALL
2
6-11/16" (170 mm)
- 3 -
5
24" TOWEL BAR INSTALLATION
18" TOWEL BAR INSTALLATION
4
M965909 (4/18)
LEVEL
1
1
2
3
18" (457.2 mm)
3
1
FINISHED WALL
2
LEVEL
1
1
2
3
24" (609.6 mm)
3
1
FINISHED WALL
2
• Refer to Step 1 for installation of MOUNTING BRACKETS (1). NOTE: The center line distance between the two
MOUNTING BRACKETS is 18" (457.2 mm). Make sure the two MOUNTING BRACKETS (1) are level.
• Install the ACCESSORY ESCUTCHEONS (2) on the MOUNTING BRACKETS (1). Secure ACCESSORY ESCUTCHEONS
(2) with SET SCREW (3).
• Refer to Step 1 for installation of MOUNTING BRACKETS (1). NOTE: The center line distance between the two
MOUNTING BRACKETS is 24" (609.6 mm) . Make sure the two MOUNTING BRACKETS (1) are level.
• Install the ACCESSORY ESCUTCHEONS (2) on the MOUNTING BRACKETS (1).
Secure ACCESSORY ESCUTCHEONS (2) with SET SCREW (3).
- 4 -
6
7
DO: CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
24" TRAIN RACK
CARE INSTRUCTIONS:
LEVEL
1
1
2
3
24" (609.6 mm)
3
1
FINISHED WALL
2
• Refer to Step 1 for installation of MOUNTING BRACKETS (1).
NOTE: The center line distance between the two
MOUNTING BRACKETS is 24" (609.6 mm) .
Make sure the two MOUNTING BRACKETS (1) are level.
• Install the ACCESSORY ESCUTCHEONS (2) on the MOUNTING BRACKETS (1).
Secure ACCESSORY ESCUTCHEONS (2) with SET SCREW (3).
M965909 (4/18)
TOWEL RING
7455.190
TOILET PAPER HOLDER
7455.230
18" TOWEL BAR
7455.018
24" TRAIN RACK
7455.260
24" TOWEL BAR
7455.024
ROBE HOOK
7455.210
M970516-0070A
MOUNTING KIT
M970516-0070A
MOUNTING KIT
M965909 (4/18)
MODEL NUMBERS
7455018 Series
7455024 Series
7455190 Series
7455210 Series
7455230 Series
7455260 Series
TOWN SQUARE
®
S
18" TOWEL BAR
24" TOWEL BAR
TOWEL RING
ROBE HOOK
TOILET PAPER HOLDER
24" TRAIN RACK
HOT LINE FOR HELP
For toll-free information and answers to your questions, call:
1 (800) 442-1902
Mon. - Fri. 8:00 a.m. to 8:00 p.m. EST
Saturday 10:00 a.m. to 4:00 p.m. EST
IN CANADA 1-800-387-0369
(TORONTO 1-905-306-1093)
Weekdays 8:00 a.m. to 7:00 p.m. EST
IN MEXICO 01-800-839-1200
Replace the “YYY” with
appropriate finish code
POLISHED CHROME 002
POLISHED NICKEL 013
BRUSHED NICKEL 295
LEGACY BRONZE 278
- 5 -
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

American Standard 7455210.295 Installation guide

American Standard
Brand
American Standard
Model
7455210.295
Category
Wall & ceiling mounts accessories
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents