Silicon Labs C8051Fxxx Dev Kit for Kits Featuring the USB Debug Adapter Quick start guide
- Type
- Quick start guide
Silicon Laboratories Inc. Copyright © 2007 by Silicon Laboratories Rev. 0.5 1/08
400 West Cesar Chavez
Austin, TX 78701
Tel: 1+(512) 416-8500
Fax: 1+(512) 416-9669
Toll Free: 1+(877) 444-3032
Internet: www.silabs.com
C8051FXXXDK DEVELOPMENT KIT QUICK-START GUIDE
F
OR KITS FEATURING THE USB DEBUG ADAPTER
Installation
Connect USB Debug Adapter to Target
Board with JTAG/DEBUG cable
1
Connect USB cable to USB
Debug Adapter
2
Connect USB cable to PC
3
From the Programs list in the
Start menu, select Silicon Laboratories
and click on the Silicon Laboratories IDE logo
7
Silicon Laboratories IDE opens
8
4
Connect power supply
to Target Board
Note: Some Target Boards include options for
alternate power sources. See Development Kit
User's Guide for details.
5
Insert Development Kit CD in
CD-ROM Drive
Note: If autorun does not launch the
introduction window, run "SETUP.EXE" directly
from the CD.
Select “Install Development Tools”
from the introduction window and
follow the on-screen instructions
6
2 Rev. 0.5
Example Program
If you are having trouble installing and/or using the development kit, please use the following support resources:
C8051Fxxx Development Kit User's Guide (click "Browse Documentation" from the CD introduction window)
Application Note “AN104: Integrating Keil 8051 Tools Into the Silicon Labs IDE"
(contains instructions for obtaining the 4 k limited version of the Keil toolset)
Latest versions of Application Notes can be found at http://www.silabs.com/products/microcontroller/applications.asp
MCU Knowledgebase (available at www.silabs.com SUPPORT)
Contact an Applications Engineer using the online information request form (available at www.silabs.com SUPPORT).
View/modify Peripherals,
Registers, Memory
Step through program
20
19
Open Debug windows
18
15
Stop execution of
example program
16
Set a breakpoint
17
Execute program
breakpoint encountered
Click on “<Family>_Blinky.c”
to open source file
12
14
Execute example program
Green LED on target board
flashes as program runs
13
Download
the program
Build and
Open project file “<Family>_Blinky_C.wsp”
located at “C:\SiLabs\MCU\Examples\
<Family>\Blinky”
9
Connect to Target Board
11
10
Select “Connection Options…” from
“Options” menu
Select Correct
Debug Interface
Select USB
Debug Adapter
C8051F0xx
C8051F1xx
C8051F2xx
C8051F3xx
C8051F4xx
C8051F5xx
C8051F9xx
JTAG
JTAG
JTAG
C2
C2
C2
C2
-
1
-
2
Silicon Labs C8051Fxxx Dev Kit for Kits Featuring the USB Debug Adapter Quick start guide
- Type
- Quick start guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Silicon Labs C8051F39x-DK Quick start guide
-
-
-
-
-
-
-
-
-