Silicon Labs C8051TxxxDK Quick start guide

Type
Quick start guide
Silicon Laboratories Inc. Copyright © 2012 by Silicon Laboratories Rev. 0.1 7/12
400 West Cesar Chavez
Austin, TX 78701
Tel: 1+(512) 416-8500
Fax: 1+(512) 416-9669
Toll Free: 1+(877) 444-3032
Internet: www.silabs.com
C8051TXXXDK DEVELOPMENT KIT QUICK-START GUIDE
F
OR KITS FEATURING EPROM MCUS
Installation
Connect the Emulation Daughter Board
to the Main Board socket connector
1
Connect USB cable to
Main Board DEBUG connector
2
Connect USB cable to PC
3
From the Programs list in the
Start menu, select Silicon Laboratories
and click on the Silicon Laboratories IDE logo
7
Silicon Laboratories IDE opens
8
4
Connect power supply
to Main Board
Note: Some boards include options for
alternate power sources. See Development Kit
User's Guide for details.
5
Download all the latest software tools
and documentation from the
Silicon Labs website URL shown below
http://www.silabs.com/mcudownloads
Note: Choose the Silicon Labs 8-bit
Development Tools download package from
that web page and install the components.
The Silicon Labs 8-bit Development Tools
download package includes the following
components and more:
+ Silicon Labs IDE
+ 8051 Evaluation Toolset
+ Configuration Wizard
+ Flash Programming Utilities
+ Production Programmer
+ CP210x VCP Driver
+ Keil uVision Driver
+ Development Kit User’s Guide
+ MCU Datasheet
+ Additional Documentation
6
2 Rev. 0.1
Example Program
If you are having trouble installing and/or using the development kit, please use the following support resources:
C8051Txxx Development Kit User's Guide (Default path: C:\SiLabs\MCU\Documentation\UsersGuides\)
Application Note “AN104: Integrating Keil 8051 Tools Into the Silicon Labs IDE"
(contains instructions for obtaining the 4 k limited version of the Keil toolset)
Latest versions of Application Notes can be found at http://www.silabs.com/products/microcontroller/applications.asp
MCU Knowledgebase (available at www.silabs.com SUPPORT)
Contact an Applications Engineer using the online information request form (available at www.silabs.com SUPPORT).
View/modify Peripherals,
Registers, Memory
Step through program
20
19
Open Debug windows
18
15
Stop execution of
example program
16
Set a breakpoint
17
Execute program
breakpoint encountered
Click on “<F a mily> _Blinky.c”
to open source file
12
14
Execute example program
Green LED on target board
flashes as program runs
13
Download
the program
Build and
Open project file “<Fam ily>_Blinky_C.wsp
located at “C:\SiL a b s\MCU\Ex a mple s \
<F a mily> \Blink y
9
Connect to Target Board
11
10
Select “Connection Options…” from
“Options” menu
Select C2
Debug Interface
Select USB
Debug Adapter
  • Page 1 1
  • Page 2 2

Silicon Labs C8051TxxxDK Quick start guide

Type
Quick start guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI