Combi 5600 User manual

Brand: Combi

Model: 5600

Type: User manual

Customer Service: 1-800-992-6624

[email protected]

www.CombiUSA.com

L0061A_01/14

Go and Grow Walker Play Table & Chair

™

Instruction Manual

READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE OF THE WALKER. KEEP INSTRUCTIONS FOR FUTURE USE.

• THE WALKER IS INTENDED TO BE USED BY CHILDREN WHO CAN SIT UPRIGHT UNASSISTED; APPROXIMATELY 6 MONTHS OLD. IT IS NOT INTENDED FOR CHILDREN

WEIGHING MORE THAN 30 LBS., OR ABLE TO WALK UNASSISTED.

• THE CHAIR IS INTENDED FOR CHILDREN THAT WEIGH LESS THAN 75 LBS.

• WARNING: NEVER LEAVE CHILD UNATTENDED. ALWAYS KEEP CHILD IN VIEW WHILE IN WALKER.

• WARNING—STAIR HAZARD: AVOID SERIOUS INJURY OR DEATH. BLOCK STAIRS/STEPS SECURELY BEFORE USING WALKER.

• USE ONLY ON FLAT SURFACES FREE OF OBJECTS THAT COULD CAUSE THE WALKER TO TIP OVER.

• STRINGS CAN CAUSE STRANGULATION! DO NOT PLACE ITEMS WITH A STRING AROUND CHILD’S NECK, SUCH AS HOOD STRINGS OR PACIFIER CORDS. DO NOT

SUSPEND STRINGS OVER PRODUCT OR ATTACH STRINGS TO TOYS.

• TO AVOID BURNS, KEEP THE CHILD AWAY FROM HOT LIQUIDS, RANGES, RADIATORS, SPACE HEATERS, FIREPLACES, ETC.

• DO NOT USE THIS PRODUCT IF IT IS DAMAGED OR BROKEN.

• CLEAN FRICTION PADS REGULARLY TO MAINTAIN STOPPING PERFORMANCE.

• DO NOT STAND ON THE CHAIR OR PLAY TABLE.

• DO NOT USE THE CHAIR OR PLAY TABLE AS A STEP LADDER.

• USE THE CHAIR ONLY FOR SEATING ONE CHILD AT A TIME.

• THE PRODUCT MUST ONLY BE ASSEMBLED BY AN ADULT. FOR THE CORRECT ASSEMBLY OF THE PRODUCT, PLEASE REFER TO THE FOLLOWING INSTRUCTIONS.

• WARNING: THE CHILD WILL BE ABLE TO REACH FURTHER AND MOVE RAPIDLY WHEN IN THE WALKER.

• KEEP HOT DRINKS, ELECTRICAL APPLIANCES AND OTHER SOURCES OF DANGER AT A SAFE DISTANCE, AWAY FROM THE CHILD’S REACH.

• PREVENT COLLISIONS WITH GLASS IN DOORS, WINDOWS AND FURNITURE.

• IT IS RECOMMENDED TO USE THE WALKER FOR SHORT PERIODS OF TIME (LESS THAN 20 MINUTES).

• DO NOT STAND ON THE TABLE OR CHAIR.

• DO NOT USE TABLE OR CHAIR AS A STEP LADDER.

• DO NOT USE REPLACEMENT PARTS OTHER THAN THOSE APPROVED BY THE MANUFACTURER.

WARNING

The Go and Grow Walker Play Table & Chair™ Includes:

COMPONENTS WARNINGS

CLEANING WARRANTYHOW TO USE

HOW TO USE THE WALKER, PLAY TABLE & CHAIR

Only children that are approximately six months old and can sit upright, unassisted and weigh less than 30 lbs. should

use the product for Stage 1 and Stage 2. The maximum weight capacity for the chair is 75 lbs.

Stage 1: Stationary Activity Center

To use as a stationary activity center, place the table top inside of the walker base frame. Place child in the walker

and check that both feet touch the top of the inserted table top, when their legs are straight.

Stage 2: Walker

To ensure proper use of the walker, place your child in the walker and check that both feet touch the floor. The child

should have only part of their weight on their feet when their legs are straight. If the child can not touch the floor, place

the table top inside of the walker base frame. Place your child in the walker and check that both feet touch the top of

the inserted table top and use as Stage 1 Stationary Activity Center.

Stage 3: Play Table and Chair

Refer to the instructions for assembling the play table and chair. The table and chair is recommended for children 18

months to 5 years

CLEANING AND MAINTENANCE

The cleaning and maintenance of this product must only be carried out by an adult.

• Wash seat pad by hand with mild soap and cold water. Air dry. The padded seat can be removed, please refer to the

assembly instructions for removing the seat pad.

• Clean friction pads regularly to maintain stopping performance.

• It is recommended to periodically wipe clean metal and plastic parts with a soft damp cloth and dried with a soft cloth.

• Always dry the metal parts to prevent the formation of rust.

• Do not use abrasive cleaners or solvents.

• Protect the product from heat, dust, sand and water.

• This product requires regular maintenance. Periodically check the product for wear, damage, or missing components.

Should any parts be missing or damaged, the walker, play table and/or chair must not be used.

LIMITED WARRANTY

Combi products, when purchased from an authorized retailer are warranted to the original purchaser to be free from defect

in materials and workmanship for a period of one (1) year from date of purchase. Combi products purchased from unautho-

rized retailers are not covered under warranty. Warranty is valid for products purchased and used in the U.S. only and used

in compliance with the warrantor’s use and maintenance instructions. Save your carton and receipt. These items may be

required in case of return for warranty assistance.

During the warranty period, your Combi product will either be repaired or replaced, at the warrantor’s discretion, without

charge for replacement parts if it is purchased from an authorized Combi dealer and is found to be defective in workmanship

or materials. For customer service, call 1-800-992-6624. The warrantor shall not be responsible for any costs incurred by

the consumer in returning a defective product for repair. The consumer will be responsible for all shipping and handling for

replacement parts.

The limited warranty shall not apply to normal wear to the product, or if the product has been:

Damaged due to accidents, misuse, abuse or neglect as determined by Combi. Tampered with or repaired by anyone other

than an authorized Combi representative or with parts other than Combi-approved parts. Leased or rented for commercial use.

THE WARRANTY PROVIDED HERIN IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. ANY

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTIC-

ULAR PURPOSE, ARE EXPRESSLY EXCLUDED. WARRANTOR’S OBLIGATIONS AND THE CONSUMER’S OR OTHER

BUYER’S REMEDIES UNDER THE LIMITED WARRANTY ABOVE ARE EXCLUSIVE AND ARE STRICTLY LIMITED TO

REPAIR OR REPLACEMENT AS STATED. ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES ON THE PART OF THE

WARRANTOR AND ANY SUPPLIER OR DEALER ARE HEARBY ALSO EXPRESSLY EXCLUDED.

FOR MORE INFORMATION

If you have any questions or comments about this product or are missing any parts, please contact Combi Customer

Service in one of the following ways. Please do not return this product to the store.

By Phone: 1-800-992-6624

By Email: [email protected]

By Mail: 3520 Westinghouse Blvd., Suite B, Charlotte, NC 28273

2. 5.

Pad Stand*3

Friction Pad *8

ASSEMBLY INSTRUCTIONS -

WALKER

1. Insert the stand support into the walker

base (A1). Push down until you hear a

click. Repeat with the other two stand

support parts (A2).

a. Turn over the walker base to face up

and make sure all three stand support

parts are correctly assembled. (A3)

2. Place the caster holder on the

attachment point on the walker base

(B1). Push the caster holder all the way

down. Repeat step for other caster

holders (B2).

3. Insert the self-tapping screws into the

holes of the caster holder on the walker

base (B3) and fasten securely in place.

Repeat for the other caster holders. (B4)

4. Attach friction pads to the attachment

points on the walker base. (C1)

a. Push down all the way until secured.

Make sure the friction pads are correctly

assembled. NOTE: The friction pads will

only fit one way. (C2)

5. Attach casters to the attachment points

on the walker base. (D1)

a. Use tool to assist in pushing the

casters down completely. (D2)

6. Assemble the two backrests. Push the

assembled backrest onto the walker top

to secure. (E1)

7. Place seat pad on the top of the backrest

and insert the plastic rings on the seat

into the slots located on the walker top

(E2). Reach under the walker top and

pull the rings through the slots. Check to

make sure that each plastic ring is locked

into position and cannot be pulled back

through the slot.

NOTE: Make sure the backrest is

assembled correctly before attaching the

seat. (E3)

8. Attach the walker top to the stand

supports, which are already attached to

the walker base. (F1)

9. Make sure stand supports are correctly

fitted into position.

NOTE: The direction of the stand

supports and the casters should be the

same. (F2)

10. Attach the toy arch to the front holes on

the walker top, then twist to lock. NOTE:

Make sure the toy arch is properly

assembled before each use. (G1)

ASSEMBLY WALKER

ASSEMBLY INSTRUCTIONS - PLAY TABLE

1. Pull the seat plastic rings from underneath the walker, and then

remove the seat pad.

2. Detach the backrest left and backrest right from the walker.

3. Unlock the toy arch from the walker.

4. Turn the walker upside down and unplug the friction pads.

5. Use a screwdriver and unscrew the four caster holders.

6. Place the table top on top of the walker and push down until

securely locked.

CHAIR COMPONENTS:

AA. Chair frame (2)

BB. Seat (2)

CC. Leg(8)

ASSEMBLY INSTRUCTIONS - CHAIR

1. Insert the legs into the holes on the chair frame. Ensure

the holes on the chair frame match up with the legs

perfectly.

2. The sunken place on the seat should match the cavity

area of the chair frame. Press the seat down to secure.

ASSEMBLY TABLECOMPONENTSASSEMBLY CHAIR

CC. LEGAA. CHAIR FRAME BB. SEAT