FormNo.3405-687RevA
WheelWeightKit
GrandStand
®
MultiForceMower
ModelNo.133-5386
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato
causecancer,birthdefects,orreproductiveharm.
Installation
1
PreparingtheMachine
NoPartsRequired
Procedure
1.Parkthemachineonalevelsurface.
2.DisengagethePTO,movethemotion-controlleverstotheNEUTRAL-LOCKposition,andengagetheparkingbrake.
3.Shutofftheengine,removethekey,andwaitforallmovingpartstostopbeforeleavingtheoperatingposition.
©2016—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3405-687*A
2
InstallingtheKit
Partsneededforthisprocedure:
2Weight
8Adapternut
8Washer
8
Bolt(1/2x3-1/2inches)
Procedure
1.Removetheexisting4lugnutsfromareartire.
Note:Retainthelugnutsforsecuringthetireifyou
removethewheelweightlater.
2.Install4adapternutstothetire.
3.Torquethenutsto103to127N∙m(76to94ft-lb).
4.Installtheweightusing4boltsand4washers.
5.Torquetheboltsto103to127N∙m(76to94ft-lb).
6.Repeattheprocedurefortheotherreartire.
g187914
2
/
