ELMWAY EB-635 Electric Bidet Seat Smart Toilet Seat Elongated White Self Cleaning Nozzle Side Panel Posterior Feminine Child Vortex Wash Adjustable Warm Water and Seat User manual

  • Hello! I am an AI chatbot trained to assist you with the ELMWAY EB-635 Electric Bidet Seat Smart Toilet Seat Elongated White Self Cleaning Nozzle Side Panel Posterior Feminine Child Vortex Wash Adjustable Warm Water and Seat User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Technical parameters
Product structure and accessories
Installation method
Basic method of use
Function and method of use
Maintenance and repaier
Security considerations
Answer to allegations
Warranty card
CONTENTS
EB-635Help EB-845Catharsis EB-645RHelp
Technical parameters
Be sure to confirm before use.
This product is suitable for AC120v/60Hz.
-The power cord must be connected to a special AC120v/60Hz
socket with ground wire.
-Only by connecting the power supply correctlycan the product
start normally.
-Confirm wire specifications according to technical requirements.
-Confirm whether the ceramic base is suitable for installation
according to the technical requirements.
Confirm water pressure
-The use of intelligent toilet covers at the same time weakens the use of water pressure.
-The water pressure of the installation environment itself is on the low side,
and the water pressure of the guiding products will also be reduced.
-When the water pressure is less than 0.07 MPa, it is recommended that
the user install the booster pump, otherwise it may affect the normal use.
Items to be confirmed after product installation
After opening the water supply valve,
please confirm whether there is water
leakage in the water connection.
● This product requires water supply to start normally.
In order to prevent water leakage in thethree-way,
be sure to use a three-way rubber gasket.
EB-635
EB-845
EB-645R
MODEL WEIGHT PACKAGE WEIGHT PRODUCT SIZE
controller
Technical parameters
Toilet lid - remote control communication connection
● Functional operation can be performed after successful
communication between the toilet lid and the remote controller;
● This product has been set up with a communication connection
at the factory, which can be used by no setting;
● This product has been set up with a communication connection
at the factory, which can be used by no setting;
If the remote control communication connection status is
blocked, or after replacing the new remote control, you
need to set it again before you can use it.
Remote control setting method (toilet remote control communication connection)
1. After plugging in the power, put the palm on the seat skin sensor within 3
seconds. After the induction, ensure the palmleave the seat immediately,
and the toilet lid will make a “di” sound;
2. Press and hold “Stop” and “Hip Cleaning” buttons for more than 3 seconds.
(Water pressure, warm air and LED lights will be turned off for five times) After
the communication connection is completed, the remote control can be used.
Product structure and accessories
Hera series pipe(1pcs)
Battery cover
Controller(1pcs)
Remote holder(1pcs)
AAA batteries(2pcs)
EB-645R
Installation method
Installation method
1. Put the two rubber nuts in the attachment into the mounting hole on the toilet.
2.Align the plastic bottom plate marked with arrow in the fitting with the mounting
hole on the toilet flat.
3. placing the metal gasket in two clamping grooves corresponding to the plastic
bottom plate.
4. Tighten the attached screws through the metal gasket and the rubber nuts on
the toilet below the plastic floor with a cross screwdriver.
5. After confirming that the whole base is fixed, push the intelligent toilet seat flat
into the installation position.
EB-645R
Installation method
Remote control installation
- Select the appropriate location to install the mounting bracket
(a place where the height of the person is satisfied and the water
will not easily splash)
- After wiping off the dust, tear off the two sides of the the
double-sided tape and stick it firmly.
- Place the remote control on the shelf aftermounting bracket is firmly fixed
Controller
Remote holder
Sit on the toilet seat
-The seat,to make skin contact on the toilet body position sensor
-Only skin contact sensor host will start, so to be seated,need to pull down the clothes or product fails to start.
Skin sensor
Choose clean function
-Hip wash,female wash,turbo wash and turno cleaning function.
-For this function, the default working time is 1 minute.
Choose stop function
-Will stop the hips wash and female wash,automatic washing and drying,children work.
Choose dry function
-Indicator lights up on the dashborad and start the drying function.
-For this function the default working time is 3 minutes.
-Between drying, use paper towels to wipe the water droplets will also be better.
Choose move/auto function
-When during the operation of Cleansing,Female,Turbo function,
press this button to activate oscillation.
The nozzle moves back and forth automatically to widen cleansing area.
-Oscillation wash stops if this button is pressed again.
-Press this button,Oscillation cleaning(1min)-Dry(3min),stio will operate automatically.
Choose child function
-Press this button to change all functions to be suitable for children.
It will automatically operate from cleaning(1min) to dry(3min)
with adequate pressure and nozzle position.
-This unit should be used under the supervision of an adult.
Basic method of use
When the skin sensor is not in contact,
the operating handle will not start.
Sitting on a body cleaner with your legs bent.
The trousers or skirt are not fully pulled down.
When using child auxiliary seat rings.
7
Choose wash swing function
8
Choose energy- saving function
-Wash at the hips,lower body wash,purge process,
select the same feature key again will start swinging wash.
nozzle moves back and foward,washing more.
-Rock wash process,select the same feature key again,to stop the swing wash.
-Keys can be lit power indicator.
-State of envoys under temperature if 32 degrees.
-Select the power save key again,you can unlock the power saving function.
-Using the product in a power-saving state,automatically lifting power-saving
mode, and back into power-saving mode.
Basic method of use
Note
If the remote control is damaged, please replace the
new remote control in time. After power-on, press the
Stop” and “Hip Cleaning” buttons at the same time,
and you can use it after 5 seconds.
Function and method of use
EB-645R
Maintenance and repaier
Nozzle cleaning method
1.Without nozzle cleaning key EB-635
When there is no seat in the state,touch in order,
cleaning after defecation-female cleaning-cleaning
after defecation -female cleaning, the nozzle
extends and stops for two minutes.
At this point, you can brush the nozzle surface
with toothbrushes and other tools, and
finally press the button the nozzle automatically
retract and clean itself.
2.With nozzle cleaning keys
(nozzle automatic cleaning) in the unseated state, press the
nozzle cleaning button, the nozzle back and forth eight times
back and forth, automatic cleaning.
(manual nozzle cleaning) when the nozzle cleaning button
is pressed for 3 seconds, the nozzle will automatically protrude
and stay for two minutes.
Please clean the nozzle with a soft brush, press the stop button,
and clean automatically after the nozzle is retracted.
Don't push the nozzle by force,
it may causes product failure.
Replace battery EB-645R
The remote control shows that the brightness of the lamp is obviously
weakened, and it takes two to replace the AAA battery when
the toilet is not moving.confirm+and- and the method of replacing
the battery (refer to the picture).
1. Remove the battery cover.
2. According to the polar direction
of + and - and put the new battery in.
3. Cover the battery cover.
4. Confirm whether it works or not.
battery cover
Maintenance and repaier
Security considerations
Security considerations
Security considerations
Answer to allegations
Warranty card
/