2. Formufit
  3. F001ECT-RD-10
F001ECT-RD-10

Formufit F001ECT-RD-10 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Formufit F001ECT-RD-10 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Table Screw Cap
FORMUFIT Inline Folding PVC Couplings connect two segments of PVC pipe externally,!and
folds over itself. To connect this product to PVC pipe, follow the instructions shown below.
Assembly
All rights reserved. TM, ® & Copyright © 2009-2018 FORMUFIT LC
https://formufit.com
PRODUCT INSTRUCTIONS
Position the Table Cap against a flat surface.
Use the appropriate fasteners for the surface in
the tapered holes on the tabs.
Secure into place using a screwdriver, hammer
or power drill/driver.
Line up a segment of the same size PVC Pipe
and insert it into the socket of the Table Cap.
Insert the pipe into the Table Cap. PVC cement
will almost always be required for a secure
connection between Table Cap and Pipe.
3
4
1
2
Adjustment and Use
The table cap can be secured using a large assortment of fasteners, such as screws (drywall,
wood, masonry, etc.), nails or rivets. The fastener chosen must have a shaft diameter of no
more than 0.20 in. (1/8”). Typically #10 size fasteners are the ideal solution for Table Caps of
any size.
Securing
For permanent and strong connections, it is!recommended to use!PVC cement/solvent to
attach the PVC pipe and the folding adapter. You can also use screws to temporarily connect
the pipe and coupler together.
All rights reserved. TM, ® & Copyright © 2009-2018 FORMUFIT LC
https://formufit.com
/