Custom Building Products PLRSW30 Specification

Type
Specification

This manual is also suitable for

ProLite
®
Premium
Large Format Tile Mortar
•Highbondstrength
•Non-slump,foruseasathinor
mediumbedmortarupto¾"
•Sagandslipresistant—
Immediatelyholdswalltileinplace
•Lightweight—30lb.coversthe
sameareaas50lb.traditional
mortar
•RapidSettingformulaalsoavailable
—Openfortrafcin4hours
TradeUptoLightweightTechnology
andFeelInstallationsGetEasier
Available in white and gray.
FEATURES BENEFITS
Multi-Purpose
For use on floors, walls and countertops. Excellent choice for large format tile 15" or greater on
any side or all natural stone.
Non-Slump Use on floors as a thin-set or medium bed up to ¾" (19 mm) thick without shrinkage.
Non-Sag / Non-Slip Superior bond strength meeting demands of large/heavy tile and stone applications on walls.
CustomLite
®
Technology 40% lighter than traditional mortars, providing excellent handling characteristics.
Contains Recycled Content Environmentally responsible product contributes to LEED
®
certification.
ITEM CODE SIZE COLOR
PLMG30 30 lb. (13.6 kg) Bag Gray
PLMW30 30 lb. (13.6 kg) Bag White
PLRSG30 30 lb. (13.6 kg) Bag Gray
PLRSW30 30 lb. (13.6 kg) Bag White
Coverage
A 30 lb. (13.6 kg) bag covers the same area as a
50 lb. (22.68 kg) bag of traditional mortar.
Uses
Vitreous, semi-vitreous or non-vitreous tile:
ceramic, mosaic, quarry, cement body tile
Impervious porcelain and glass tile
Brick and stone veneer
Cement-based precast terrazzo
Natural stone tile
Areas of Use
Interior or exterior floors, walls or countertops
Concrete, mortar beds, masonry, Portland
cement plaster
WonderBoard
®
Lite and other cement backerboards
Liquid applied waterproofing membranes such as
RedGard
®
and Custom 9240
®
Crack prevention sheet membranes such as
Crack Buster Pro
®
Exterior grade plywood
Gypsum wallboard (dry areas)
Existing ceramic tile (scarified)
Fully bonded sheet vinyl flooring (scarified)
Plastic laminates (scarified)
Cutback adhesive (see Technical Data Sheet)
Standards
Exceeds ANSI A118.4 TE and A118.15 TE standards
without the need for additives
Custom Building Products
800-272-8786
custombuildingproducts.com
SS112 5/15
©2015 Custom Building Products. All rights reserved. The CUSTOM
®
logo and select product logos are registered
trademarks of Custom Building Products, Inc. CUSTOM may make product modifications at any time without notice.
Visit custombuildingproducts.com for updated technical data sheets and MSDS information.
ProLite is part of Custom's family of dry set modified mortars for large and heavy tile.
  • Page 1 1
  • Page 2 2

Custom Building Products PLRSW30 Specification

Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI