PLEDV2488A
INSTRUCTION MANUAL
LED TV
Table of Contents
1
Caution
Important Safety Precautions
Top/Side panel diagram
Remote Controller
Battery Installation
Using the Remote Control
Install TV
Set your TV
Connect Antenna and power
Turn On TV
Help
2
3
4
6-7
8
9
12
13-29
32
33
TV Bracket assembly
5
Specifications
Select Input Source
Wall Mount In Stallation
Picture Menu
Audio Menu
Channel Menu
Parental Menu
Setup Menu
13-15
16-17
18-20
21-25
26-29
DVD Setup
30-31
Systems Connection
10
The lightening flash with arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of un-insulated "dangerous voltage"
within the products enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to the persons.
The exclamation point within an equilateral triangle is intend to alert the user to
the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Correct disposal of this Product
W aste Electrical & Electronic Equipment (WEEE)
Your product is designed and manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life,
should be disposed of separately from your household waste.
Please dispose of this equipment at your local community waste
collection/recycling centre.
In the European Union there are separate collection systems for used electrical
and electronic products. Please help us to conserve the environment we live in!
Caution
2
3
4
8
3.95”
3.95”
4
3.95” x 3.95”
100 100
Wall Mount Installation
TV Bracket assembly
5
1.Match the TV unit into the stand, then hold the TV stand,
revolve and lock the tv unit tightly as the arrowhead point.
2.Fix the screws into the TV stand after installing the tv
unit and tv stand.
3
screws
Indicator on(Red) Standby mode
Indicator on(Green) Power on mode
(IR) Infrared Receiver: Receives IR signals from the remote control.
(Power on/Standby) LED Indicator: Press
to turn on and off
VOL
The functions of the buttons on the are as follows:TV
CH+/-:When watching TV: select channels.
MENU:
1.Press Menu.
2.Press SOURCE to enter.
3.Use CH+/- to shift UP/DOWN.
4.Press SOURCE to confirm, then press VOL+/-to adjust.
5.Press SOURCE to confirm
Top panel diagram
6
SOURCE External signal input selection and confirm the
item selected.
DVD
Insert disc with shiny
side facing the front
of TV.
Side Panel Diagram
7
(Left Side)
(Back Side)
COAXIA L
Y Pb Pr
Serv ice Port
Connect to ANT or cable source
PC AUDIO IN
PC audio input
VGA IN
VGA signal from computer output
YPbPr
Connect to the composite terminal of your DVD/VCR
ANT 75 Ω
EARPHONE
For Upgrade Use
AV INPUT
Earphone output
COAXIAL
Digital Audio Output
Service Port
HDMI IN
Connect to HDMI of DVD or other equipment
Name
Function Description
Remote Controller
8
Universal remote code
This is the code for remote control of
PLEDV2488A,if you want to change to a
universal remote control,you can edit
this code into your universal remote control.
(1)Open the battery compartment cover
on the back side
(2)Insert two 1.5V batteries of AAA type
with correct polarity
(3)Close the battery compartment cover
on the back side
Universal Remote Control code:007F
(Universal Remote control is not included)
MENU
SOUR CE
ENT ER
EXIT
SLEE P P.MOD E S.MO DE
DISPLAY
MTS / MP3PROG
ZOOM
D.MENU D.TITLE
ANGLE
EPG
D.DISP
REV FWD PREV
FAV-
GOTO
AUDIO
SUBTITLE
FAV FAV+
PROG STEP REPEAT A-B
NEXT
D.setup
D.Menu D.Title
Goto
D.Disp
PROG STEP REPEAT A-B
Zoom
Angle
Subtitle
Audio
D.TITLE:
A-B
During the playback, press thi s button to r epeat
playback of a specific s ection on a d isc.
SLEEP: Select amount of time before TV turn
off
automatically.
S.MODE: Press to cycle through the different sound settings
P.MODE: Press to cycle through the different picture settings
D.DISP:
D.MENU:
Press "-" t o enter a pro gram numb er for mult iple prog ram
channel, such as 2-1 e tc.
GOTO:
STEP：Play for single frame ima ge
ZOOM In DVD source adjust DVD picture size
MTS / MP3PROG:
Press to select the audi o mode,yo u can selec t stereo, Mono,
or SAP(second audio pr ogram). /When pla ying mp3 disc,
press MP3 PROG and add the favorite m usic to pla ylist,
press PROG two times to see the progr ammed pla ylist.
CH +/- : Press to sca n through or to s elect a channel .
V +/-: Press to inc rease / decre ase the sound lev el.
EPG:
D.Setup:
AVTV
HDMI1
HDMI2
PC
YPBPR
DVD
3
side
indicator
9
10cm
10cm 10cm
LED TV
COAXIA L
2
10
COAXIA L
Y Pb Pr
Serv ice Port
Y Pb Pr
Serv ice Port
11
Y Pb Pr
Serv ice Port
Press SOURCE button to display the input source list,
Press ▼ / ▲ or SOURCE button to select the input source you want to,
Press ENTER button to enter the input source,
Press EXIT button to quit.
12
Select Input Source
Source
TV
AV
YPbPr
DVD
HDMI
PC
13
Main Menu Operation
Picture Menu
ress to enter.
Press MENU button to display the main menu.
Press ◄ / ► butt on select PIC TURE in the main menu,then p ENTER / ▼
1. Press ▼ / ▲ butt on to select th e option th at you want to adjust in the PIC TURE menu.
2. Press Ente r/◄ / ► butt on to adjust.
3. Aft er finishing your adjustm ent, Press MENU button to save and retu rn back to the pre vious menu.
Picture Settin gs
Press ▼ / ▲ butt on to select Picture Mode, th en press Ente r / ►button to enter sub-m enu.
Press ▼ / ▲ butt on to select Picture Mode, th en press◄ / ► butt on to select.
(Available Pictu re mode: Sta ndard,Movie,User, Vivid).
TIPS: You can press PMODE button to change the Picture Mode dire ctly.
HDMI Mode
Color Temp
Change th e overall color cast of the pictu re.
Color Temp
Advanced Settin gs
Adjust advanced video fe atures to fi ne tune the pictu re.
Advanced Settings
Noise Reductio n
Set opti ons to reduce video noise.
Noise Reduction
Mpeg NR
Set opti ons to reduce MPEG noise.
Noise Reduction
Press ▼ / ▲ butt on to select HDMI Mode, th en pre ss◄ / ► butt on to select Auto ,Video or PC.
It is aviliable only in HDMI Input.
Aspect Ratio
Press ▼ / ▲ butt on to select Aspect Ratio, th en press◄ / ► butt on to select.
Press ▼ / ▲ butt on to select , then press◄ / ► button to select Normal/Warm /Cool.
Press ▼ / ▲ butt on to select , then press Enter / ►butt on to enter sub-m enu.
Press ▼ / ▲ butt on to select , then press◄ / ► button to select .
Press ▼ / ▲ butt on to select , then press◄ / ► button to select .
Normal Auto matically adjust Aspect Rati o based on TV size and TV pro gram.
Wide Use to watch wide scre en content.
Cinema Stre tc hes image at edges but keeps a clear image in th e center.
Zoom Expands image to fi ll screen. Top and butt on maybe cut off.
Normal Pro duces a vivid image.
Warm Produces a re d-hued image.
Cool Pro duces a gentle blue-hued image.
Off Select to turn off video noise detecti on.
Low Dete ct and reduce low video noise.
Medium Dete ct and reduce moderate video noise.
High Dete ct and reduce enhanced video noise.
Off Select to turn off MPEG noise detection.
Low Dete ct and reduce low MPEG noise.
Medium Dete ct and reduce moderate MPEG noise.
High Dete ct and reduce enhanced MPEG noise.
Brightness/ Color/ Tint
Press ▼ / ▲ button to select option, then press ◄ / ► button to adjust.
Contrast Adjust the highlight intensity of the picture, but the shadow of the picture is invariable.
Color Adjust the saturation of the color based on your own like.
Tint Use in compensating color changed with the transmission in the NTSC code.
Contrast/ Sharpness/
Brightness Adjust the optical fiber output of the entire picture, it will effect the dark region of the picture.
Sharpness Aadjust the peaking in the detail of the picture.
(Available Aspect Ratio: Normal,Wide,Cinema,Zoom).
14
Main Menu Operation
Dynamic Contrast
Automatically adjust picture detail and brightness.
Dynamic Contrast
Press ▼ / ▲ button to select , then press◄ / ► button to select .
(Available Aspect Ratio: Off,Low,Medium,High).
PC Settings
INPUT
M ◄ / ►
ENTER / ▼ ▼
Press
Press
to select PC source.
ENU to enter the main menu,then press button to select PICTURE menu.
Press to enter and press to select PC Settings.
Hposition
Adjust the horizontal position of the picture.
Vposition
Adjust the vertical position of the picture.
Phase
Minimize horizontal distortion.
Clock
Minimize vertical stripes in the screen image.
Auto Adjustment
Press ENU / button to enter.
Adjust to the PC signal timing automatically.
M ►
Press ▼ / ▲ button to select PC Settings, then press◄ / ► button to .adjust
15
Main Menu Operation
Audio Menu
ress to enter.
Press MENU button to display the main menu.
Press ◄ / ► butt on select AUDIO in the main menu,then p ENTER / ▼
1. Press ▼ / ▲ butt on to select th e option th at you want to adjust in the AUDIO menu.
2. Press Ente r/◄ / ► butt on to adjust.
3. Aft er finishing your adjustm ent, Press MENU button to save and retu rn back to the pre vious menu.
Audio Mode
Audio ModePress ▼ / ▲ button to select , then press Enter / ►button to enter sub-menu.
Sound Mode
Press ▼ / ▲ button to select Sound Mode, then press◄ / ► button to select.
(Available Sound mode: Standard, Soft, User, Dynamic).
You can change the value of Treble,Bass and Balance when the sound is in User mode.
TIPS: You can press SMODE button on the remote control to change the Sound Mode directly.
Treble/Bass/Balance
Press ▼ / ▲ button to select option, then press ◄ / ► button to adjust.
16
Main Menu Operation
Audio Effe ct
Audio Effe ct
AVL
Analog Language
It is only available in ATV.
Analog Language Mono,S te re o or Sap.
Digita l Language
. It is available Only in DTV.
Digita l Language English , .
Digita l Audio Output
Send the audio output ty pe of coax or opti cal termical.
Digita l Audio Output
EQ Settin gs
EQ Settings
Press ▼ / ▲ butt on to select , then press◄ / ► button to select On or Off.
Press ▼ / ▲ butt on to select AVL , then pre ss◄ / ► button to select On or Off.
Press ▼ / ▲ butt on to select , then press◄ / ► button to select
Press ▼ / ▲ butt on to select , then press◄ / ► button to select
Press ▼ / ▲ butt on to select , then press◄ / ► button to select Off,R AW or PCM.
Press ▼ / ▲ butt on to select , then press Enter / ►butt on to enter sub-m enu.
Set the auto volume contro l.
Configure s the multi -tra ck sound.
Adjust th e curve of 7 bands equalizer.
Mono Sets th e sound to mono.
Stereo Sets the sound to ste reo when ste re o is not available, the sound is automati cally switc hed to mono.
Sap Sets th e sound to the second audio pro gram.
Select th e language supporte d by the chosen digita l channel
French ,S panish
EQ Mode
Press ▼ / ▲ button to select EQ Mode, then press◄ / ► button to select.
(Available EQ mode: Off,Rock,Pop,Jazz,User).
17
Main Menu Operation
ress to enter.
Press MENU button to display the main menu.
Press ◄ / ► butt on to select CHANNEL in th e main menu,t hen p ENTER / ▼ .
1. Press ▼ / ▲ butt on to select th e option th at you want to select in the CHANNEL menu.
2. Press Ente r button to enter sub-m enu.
3. Press MENU button to re tu rn back to th e pre vious menu.
Signal Type
Signal Type
Auto Searc h
Auto Searc h
Press ▼ / ▲ butt on to select , then press ◄ / ► button to select Air or Cable.
Press ▼ / ▲ butt on to select , then press Enter / ►butt on to start th e auto searching.
Channel Menu
It will search analog channels first,then digital channels.
Before execute auto channel search,please confirm your antenna type is Air or Cable.
Wrong setting of Signal Type maybe cause finding no channel.Found numbers do not include
encryption programs.
18
Main Menu Operation
Channel Lis t
Channel ListPress ▼ / ▲ butt on to select , then press Enter / ►butt on to enter sub-m enu.
You can view all the channels and choose one quickly.
Press ▼ / ▲ button to highlight a channel and press ENTER to view it.
Favorite List
Favorite ListPress ▼ / ▲ button to select , then press Enter / ►button to enter sub-menu.
All of your favorite channels are listed in this menu,and you can choose them quickly.
Channel Edit
Channel EditPress ▼ / ▲ button to select , then press Enter / ►button to enter sub-menu.
Skip Set the channel to be skipped when using CH+/CH- to view channels.
Favorite Set the channel to your favorite list.
Press ▼ / ▲ button to select the channel you want to set.
Press ◄ / ►button to highlight corresponding item,and press ENTER to set or cancel.
19
Main Menu Operation
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
ProScan PLED1526A-C User manual
-
Curtis Proscan User manual
-
-
-
-
-
-
-
-
Curtis PLED1960A User manual
Other documents
-
RCA RLED2445A-B User manual
-
PYLE Audio PHST90ICW User manual
-
PYLE Audio PHST90ICW User manual
-
-
VIORE LCD22VXF7MPT Operating Instructions Manual
-
Majestic TD1920USA User manual
-
Curtis LCD3227A-2 User manual
-
-
Pyle PTVDLED22 Owner's manual
-
