Make sure all necessary connections are correctly made before connecting the unit to
the wall socket and turning on the power.The power indicator turns red and the unit is in
standby mode.
Press on the remote control(or on the up of theTV) to turn on the power to theTV.
The power indicator turns from red(standby) to green (on).To turn the TV off, press .
The unit will switch to standby mode and the power indicator turns red.
Make sure you have the external input device properly connected.
Turn on the external device and press on theTV remote control to select it.
The input source menu appears.
1. Use keys to move the highlighted bar to the desired source item.
2. Press to confirm, information of the selected source name will appear on the TV
screen for a few seconds.
Power on/off
Input source
Search channel
SOURCE
OK
▼/▲
: Move
Channel Settings