ENG-9
YoucanusetheimagestabilizerinAForMF
mode.
Thisfunctionprovidesoptimalimagestabilization
dependingonshootingconditions(suchas
shootingstillsubjectsandfollowingshots).
1 Set the STABILIZER switch to ON.
Ifyouarenotgoingtousetheimagestabilizer
function,settheswitchtoOFF.
2
When you press the shutter button halfway,
the Image Stabilizer will start operating.
Makesuretheimageintheviewnderisstable,
thenpresstheshutterbuttontherestoftheway
downtotakethepicture.
TheImageStabilizercannotcompensatefora
blurredshotcausedbyasubjectthatmoved.
TheImageStabilizermaynotbefullyeffective
ifyoushootfromaviolentlyshakingvehicleor
othertransportation.
TheImageStabilizerconsumesmorepower
thannormalshooting,resultinginfewershots
andashortermovieshootingtime.
Whenshootingastillsubject,itcompensatesfor
camerashakeinalldirections.
Itcompensatesforverticalcamerashakeduring
followingshotsinahorizontaldirection,and
compensatesforhorizontalcamerashakeduring
followingshotsinaverticaldirection.
Whenyouuseatripod,theImageStabilizer
shouldbeturnedofftosavebatterypower.
E
venwithamonopod,theImageStabilizerwill
beaseffectiveasduringhand-heldshooting.
However,dependingontheshootingconditions,
therearecasesinwhichtheImageStabilizer
effectmaybelesseffective.
T
heimagestabilizerfunctionalsooperateswhenthe
lensisusedwithanextensiontubeEF12IIorEF25II.
TheImageStabilizerwilloperateevenwhenyou
pressthebuttonassignedtotheAFfunctionwith
thecamera’sCustomFunctions.
Image Stabilizer
5