Electrolux 584239 (GC1G11A2BF) Datasheet

Category
Cookers
Type
Datasheet

Electrolux 584239 (GC1G11A2BF) is a modular cooking range line S90 Heavy Duty 2-Burner Gas Range Ecoflam on Pass Through Open Base, 2 Sides. It is a unit for island type installation with operations by chef from both sides (knobs on both sides of the console). The one 5 kW and one 7 kW high efficiency burners suit high performing cooking requirements for the most demanding customers. Model is supplied with Ecoflam pan detection system, which saves energy and reduces unnecessary heat radiation in the kitchen.

Electrolux 584239 (GC1G11A2BF) is a modular cooking range line S90 Heavy Duty 2-Burner Gas Range Ecoflam on Pass Through Open Base, 2 Sides. It is a unit for island type installation with operations by chef from both sides (knobs on both sides of the console). The one 5 kW and one 7 kW high efficiency burners suit high performing cooking requirements for the most demanding customers. Model is supplied with Ecoflam pan detection system, which saves energy and reduces unnecessary heat radiation in the kitchen.

Modular Cooking Range Line
S90 Heavy Duty 2-Burner Gas
Range Ecoflam on Pass Through
Open Base, 2 Sides
ITEM #
MODEL #
NAME #
SIS #
AIA #
Short Form Specification
Item No.
APPROVAL:
Electrolux Professional
www.electrolux.com/foodservice
Modular Cooking Range Line
S90 Heavy Duty 2-Burner Gas Range Ecoflam on Pass Through
Open Base, 2 Sides
Modular Cooking Range Line
S90 Heavy Duty 2-Burner Gas Range
Ecoflam on Pass Through Open Base, 2
Sides
584239 (GC1G11A2BF)S90 2 OPEN GAS BURNERS
(41,000 BTU), ECOFLAM,
PASS THROUGH OPEN
BASE, 2SIDE OPERA TION
Unit to be Electrolux S90 Heavy Duty one 17,000 BTU (5 kW) and one 24,000
BTU (7 kW) burner gas range on pass through open base with ecoflam. Unit
to be installed in central island type installations with operations from both
sides. High efficiency burners with continuous power regulations to high
power of 41,000 BTU’s (12 kW). Thermocouples as standard on burners
for added safety. Body and open base of unit entirely in 304 Stainless steel.
Pan supports in heavy duty cast iron. Unit shall have heavy duty 304 Stainless
steel internal frame with reinforcement on the top of 3 mm. Extra strength
work top in heavy duty 3 mm Stainless steel. “Lastertec” connection system
permits units to be connected to each other creating a seamless work top.
Main Features
Unit for island type installation with operations by
chef from both sides (knobs on both sides of the
console).
The one 5 kW and one 7 kW high efficiency burners
suit high performing cooking requirements for the
most demanding customers.
Model is supplied with Ecoflam pan detection
system, which saves energy and reduces
unnecessary heat radiation in the kitchen.
Manual gas valves with fixed high and low
positions allow precise control of the flame
intensity.
Large sized pan support in cast iron (stainless
steel as option) with long center fins to allow the
use of the largest down to the smallest pans.
Pass through open base compartment for storage
of pots, pans, sheet pans, etc.
Flat deep drawn spillage area with removable pan
supports, burner rings and flame ignition parts.
Heavy duty internal frame in 304 type Stainless
steel with reinforcement on top of 3 mm.
3 mm top in 304 type Stainless steel.
“Lasertec connection system” creates seamless
work top when units are connected to each other.
Unit delivered with four 200 mm legs as standard
(all round Stainless steel kick plates as option).
Optional Accessories
Solid top plate for open burner,
360x360mm
PNC 910718
Flexible connection hose 3/4"PNC 910720
Pan rest CNS, 430x380mmPNC 910729
Shelf for pass-through open bases and hot
cupboards, W=500mm, thermaline 900
PNC 910776
Side panel, freestanding installations (units
without rear C-board)
PNC 911527
Stainless steel front and back kicking
strips, 500mm
PNC 911532
Stainless steel kicking strips, both sides,
left and right
PNC 911638
Portioning shelf, 500mm widthPNC 911851
Portioning shelf, 500mm widthPNC 911873
Shelf fixation kit for open and hot base, GN
1/1, 1 side operated
PNC 911915
Side panel, freestanding installations (units
without rear C-board)
PNC 911949
Modular Cooking Range Line
S90 Heavy Duty 2-Burner Gas Range
Ecoflam on Pass Through Open Base, 2
Sides
Modular Cooking Range Line
S90 Heavy Duty 2-Burner Gas Range Ecoflam on Pass Through Open
Base, 2 Sides
The company reserves the right to make modifications to the products
without prior notice. All information correct at time of printing.
2009.10.24
Front
Top
EQ=Equipotential screw
G=Gas connection
Side
Gas
Gas Power:
584239(AGGRABGOOM)40908 Btu/hr (12 kW)
Gas Type Option:
Natural Gas;Butane/Propane;
Town Gas on request
Gas Inlet:3/4" NPT
Natural gas - Pressure:7" w.c. (17.4 mbar)
LPG Gas Pressure:11" w.c. (27.7 mbar)
Key Information
Storage Cavity Dimensions
(width):340 mm
Storage Cavity Dimensions
(height):358 mm
Storage Cavity Dimensions
(depth):860 mm
Net weight:70 kg
Shipping weight:90 kg
Shipping height:900 mm
Shipping width:500 mm
Shipping depth:900 mm
Shipping volume:0.32 m³
1 / 1

Electrolux 584239 (GC1G11A2BF) Datasheet

Category
Cookers
Type
Datasheet

Electrolux 584239 (GC1G11A2BF) is a modular cooking range line S90 Heavy Duty 2-Burner Gas Range Ecoflam on Pass Through Open Base, 2 Sides. It is a unit for island type installation with operations by chef from both sides (knobs on both sides of the console). The one 5 kW and one 7 kW high efficiency burners suit high performing cooking requirements for the most demanding customers. Model is supplied with Ecoflam pan detection system, which saves energy and reduces unnecessary heat radiation in the kitchen.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document