Vista VVRD4V9DN Installation Instructions Manual

Please read this manual thoroughly before use, and keep it handy for future reference.

1/3" EX-VIEW CCD COLOR CAMERA

Installation & Instruction Manual

VISTA VANDAL RESISTANT

DAY & NIGHT DOME CAMERA

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO N OT INSE RT

ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS

OR OTHER OPENINGS ON THE EQUIPMENT.

CAUTION

CAUTIONCAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER(OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated "dangerous voltage" within the

product's enclosure that may be of sufficient magnitude to

constitute a risk of electric shoc k to per sons .

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the product.

FCC COMPLIANCE STATEMENT

WARNING :

THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT

THIS PRODUCT MAY CAUSE RADIO INTERFERENCE IN WHICH

CASE THE USER MAY BE REQUIRED TO TAKE ADEQUATE

MEASURES.

CE COMPLIANCE STATEMENT

INFORMATION TO THE USER : THIS EQUIPMENT HAS BEEN

TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A

CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC

RULES. THESE LIMITS ARE DESIGNED TO PROVIDE

REASONABLE PROTECTION AGAINST HARMFUL

INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A

COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES,

USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF

NOT INSTALLED AND USED IN ACCORDANCE WITH THE

INSTRUCTION MANUAL, MAY CAUSE HARMFUL

INTERFERENCE TO RADIO COMMUNICATIONS. OPERATION

OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO

CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE USER

WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS

CAUTION : CHANGES OR MODIFICATIONS NOT EXPRESSLY

APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE

COULD VOID THE USER'S AUTHORITY TO OPERATE THE

EQUIPMENT.

THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN

ICES-003.

NORME NMB-003 DU CANADA.

IMPORTANT SAFEGUARDS

READ INSTRUCTIONS -- All the safety and operating instructions should be read before the

appliance is operated.

RETAIN INSTRUCTIONS -- The safety and operating instructions should be retained for

future reference.

CLEANING -- Unplug video monitor or equipment from the wall outlet before cleaning. Do

not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

ATTACHMENTS -- Do not use attachments not recommended by the video monitor or

equipment manufacturer as they may result in the risk of fire, electric shock or injury to

persons.

WATER AND MOISTURE -- Do not use video monitor or equipment near water -- for

example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a

swimming pool, or the like.

ACCESSORIES -- Do not place video monitor or equipment on an unstable cart, stand or

table. The video monitor or equipment may fall, causing serious injury to a child or adult, and

serious damage to the equipment. Wall or shelf mounting should follow the manufacturer's

instructions, and should use a mounting kit approved by the manufacturer.

Video monitor or equipment and cart combinations should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the equipment and cart combination to

overturn.

VENTILATION -- Slots and openings in the cabinet and the back or bottom are provided for

ventilation, and to ensure reliable operation of the video monitor or equipment and to protect

it from overheating. These openings must not be blocked or covered. The openings should

never be blocked by placing the video monitor or equipment on a bed, sofa, rug, or other

similar surface. Video monitor or equipment should never be placed near or over a radiator or

heat register. Video monitor or equipment receiver should not be placed in a built-in

installation such as a bookcase unless proper ventilation is provided.

POWER SOURCES -- Video monitor or equipment should be operated only from the type of

power source indicated on the marking label. If you are not sure of the type of power supplied

to your home, consult your video monitor or equipment dealer or local power company. For

video monitor or equipment designed to operate from battery power refer to the operating

instructions.

GROUNDING OR POLARIZATION -- This video monitor may be equipped with a polarized

alternating - current line plug (a plug having one blade wider than the other). This plug will fit

into the power outlet only one way. This is a safety feature. If you are unable to insert the plug

fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your

electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized

plug.

Alternate Warnings - This video monitor is equipped with a three-wire grounding-type plug, a

plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet.

This is a safety feature. If you are unable to insert the plug into the outlet, contact your

electrician to replace your obsolete outlet. Do not defeat the safety purpose of the

grounding-type plug.

1.

2.

3.

4.

5.

6.

6A.

7.

8.

9.

IMPORTANT SAFEGUARDS

10.

11.

12.

POWER CORDS -- Do not allow anything to rest on the power cord. Do not locate

video monitor or equipment where the cord will be abused by persons walking on it.

HEED WARNINGS -- Follow all instructions marked on the video monitor or equi pmen t.

LIGHTNING -- For added protection for video monitor or equipment during a lightning

storm, or when it is left unattended and unused for long periods of time, unplug it from

the wall outlet and disconnect the antenna or cable system. This will prevent damage to

the video product due to lightning and power-line surges.

OVERLOADING --Do not overload outlets and extension cords as this can result in a

risk of fire or electric shock.

OBJECT AND LIQUID ENTRY -- Never push objects of any kind into video monitor or

equipment through openings as they may touch dangerous voltage points or short-out

parts that could result in a fire or electric shock. Never spill liquid of any kind o n the

product.

SERVICING -- Do not attempt to service video monitor or equipment yourself as

opening or removing covers may expose you to dangerous voltage or other hazards.

Refer all servicing to qualified service personnel.

DAMAGE REQUIRING SERVICE -- Unplug video monitor or equipment from the wall

outlet and refer servicing to qualified service personnel under the following cond itio ns:

A. When the power-supply cord or the plug has been damaged.

B. If liquid has spilled, or objects have fallen into the video product.

C. If the video product has been exposed to rain or water.

D. If the video product does not operate normally by following the ope rat ing

instructions, adjust only those controls that are covered by the operating

instructions as an improper adjustment of other controls may result in

damage and will often require extensive work by a qualified technician

to restore the video product to its normal operation.

E. If the video product has been dropped, or the cabinet damaged.

F. When the video product exhibits a distinct change in performance --

this indicates a need for service.

REPLACEMENT PARTS -- When replacement parts are required, be sure the service

technician has used replacement parts specified by the manufacturer or that have the

same characteristics as the original part. Unauthorized substitutions may result in f ire,

electric shock or other hazards.

SAFETY CHECK -- Upon completion of any service or repairs to this video product, ask

the service technician to perform safety checks to determine that the video product is i n

proper operating condition.

FIELD INSTALLATION -- This installation should be made by a qualified service person

and should conform to all local codes.

13.

14.

15.

16.

17.

18.

19.

INTRODUCTION

- 1 -

High-performance 1/3" SONY DSP color Exview HAD CCD technology

NTSC: 330 lines(Color), 380 lines(B/W) of resolution(Standard)

480 lines(Color), 530 lines(B/W) of resolution(High)

PAL: 320 lines(Color), 360 lines(B/W) of resolution(Standard)

470 lines(Color), 510 lines(B/W) of resolution(High)

0.3lux(Color), 0.02lux(B/W), F1.2 Sensitivity(Standard)

0.5lux(Color), 0.04lux(B/W), F1.2 Sensitivity(High)

Auto electronic shutter [1/60(1/50) ~ 1/100,000] and manual electronic shutter

modes

1/3" CCD Colo(u)r Image Sensor:

This is a professional level camera chip which achieves a very high quality

picture.

Angle 4-9mm Vari-focal Lens, 4-9mm DC Auto Iris Lens, 12mm DC Auto Iris Lens:

Allows a large area to be monitored from a single camera.

Flicker less, BLC, D/N Conversion(Color/BW), AGC, D&N(Auto/Manual), Sync

adjustments

12VDC or 24VAC

Note : The user of this system is responsible for checking and

complying with local, state and federal laws and statutes

concerning the recording and monitoring of audio signals.

The 1/3" DSP color security camera provides SONY, true-color images especially

for closed-circuit television (CCTV) and security surveillance applications.

FEATURES:

Unpack and identify the following parts from the shipping container:

A. Camera B. Mounting Screw C. Instruction manual

CAMERA CONNECTIONS

- 2 -

REMINDER:

Never aim the camera directly into the sun.

1. Lens : Allows a wide area to be monitored.

2. Power : 24V AC input / 12V DC input

3. Video : BNC connector used to connect the camera to a monitor, switcher, etc.

1

2

3

POWER

Use of Listed Class 2 power source.

INSTALLING & ADJUSTING CAMERA MODULE

- 3 -

Use the following drawings to install the camera module to the housing.

Flat Head

screw M3 x 6

BASE INSTALLATION

- 4 -

CAUTION : When installing the camera outdoors, the following instructions

must be followed closely.

Torx screws

M3 x 12 (4x)

1. Loosen the four torx screws located midway up the front of the housing. Leave

the screws intact in the front portion.

2. Drill holes for the four mounting screw anchors. Insert the screw andchors and

attach the housing to the screw anchors.

3. Warp the conduit fitting threads with Teflon tape before installing them.

(Teflon tape is not supplied.)

MOUNTING HOUSING TO ELECTRICAL BOX

The housing can also be mounted

on a 4s electrical box.

Electrical Box

Torx Screws

UNC 8-32 x 0.75

(4x or 2x)

Wall / Ceiling

Plastic

anchors (4x)

Torx screws

M6 x 35 (4x)

Teflon Tape

- 5 -

HEATER KIT INSTALLATION continued

Use the following drawings to install the camera the heater kit in the housing.

TB3

TB

1

TB

2

H

EATE

R

S

E

R1

0

24V

OUT

2

4V

I

N

T

B

5

24Vac Out

to Heater

24Vac Power

Supply Input

24Vac Power

Supply Output

24V AC

TB

3

G

ND

VI

D

G

ND

VID

TB

1

TB

2

V

I

D

E

O

U

T

VI

DE

O

I

N

H

EA

T

ER

S

E

R10

0

1

2V

OU

T

12

V

IN

T

B5

HEATER

POWER CONNECTION

VIDEO CONNECTION

CAMERA CONNECTION

T

B

4

12V DC

HEATER KIT INSTALLATION

Power Supply 24V AC / 12V DC

Power Consumption 20W

oo

Heater ON at 41 F (5 C)

oo

Heater OFF at 59 F (15 C)

HEATER (IF APPLICABLE)

- 6 -

LENS ADJUSTMENT (OPTIONAL VARIFOCAL LENS)

Field of view: Adjust setting from Telephoto (T)

to wide (W) field of View.

Focus: Adjust lens focus from near

(N) to infinity ( ).

N

T

W

Adjust Focus

Adjust Angular Field View

ADJUSTMENTS

Backlight compensation:

Phase adjustment is used in a multi-camera system when power is supplied

from a different source, causing the camera to be out of phase. This affects

auto-switching of the cameras by causing a vertical flip or roll during the switch

interval. The vertical phase adjustment allows the camera's line lock sync to be

adjusted from 0 to 300 degrees with reference to the zero line crossing of the

AC power source.

A. Ensure that all cameras are powered from the same electrical

source and wired in a similar fashion.

B. Adjust the phase control on the camera until there in no

vertical flip or roll on the monitor when using an auto switcher.

Vertical Phase

Backlight compensation (BLC) fixed ON. (BLC size 40% of center).

Vertical Phase:

- 7 -

DC AUTO IRIS LENS

Orange + Drive

Red - Drive

Green + Control

Yellow - Control

LENS

Image Size 1/3" CCD

Focal Length

Aperture Ratio

Angular

Field of View

4-9mm 12mm

DIAGONAL

o

25.7

DIAGONAL

o

4mm : 81

o

9mm : 38.6

DC AUTO IRIS ADJUSTMENT

IRIS LEVEL

4.0-9.0mm 5%

1 : 2.0 5%

12mm 5%

1 : 1.8 5%

ON DIP

1234567890

AES OFF ON ON ON NC Nor OFF LOW INT

OFF OFF OFF NC Hi ON Hi L/L

MES ON

FF

BLC EI GAMMA AGC AGC SYNCAWB

- 8 -

ON DIP

1234567890

N

O

2

1

SHTR Switch (Aes/Mes) - This switch allows the user to choose between auto

exposure and manual exposure. Position the switch toward the front of the

camera for auto exposure, whereby the exposure is performed by the electronic

iris and AGC control. Position the switch toward the back of the camera for

manual exposure, whereby the shutter speed can be set by the shutter adjust.

*Manual Exposure (Sw1 = Manual Exposure)

Flickerless Switch (off/on) - (SW1=Auto Exposure) This function is used for

removing flicker, when camera signal format does not coincide with power source

frequency being used.

BLC Switch (on/off) - (SW1=Auto Exposure) This on/off switch controls

backlight compensation. When set to ON, the camera will automatically try to

maintain proper exposure in the specific area even if the lighting level changes.

E/I (on/off) - (SW1=Auto Exposure)

When set to the ON position, the electronic iris switch automatically varies the

camera's shutter to mimic auto-iris control, allowing fixed or manual iris lenses to

be used in a wider range. When this switch is set to ON, turn the F/F switch OFF.

1.

2.

3.

4.

Switch Position

SW1 SW2 SW3 SW4

MES

on on on

off

on

off

on

off

on

on on off

off on off

on off off

off off off

Shutter Speed

Switch

1/50

1/120

1/250

1/500

1/1000

1/2000

1/4000

1/10000

Sw 1 2 3 4

FUNCTION SWITCH

- 9 -

FUNCTION SWITCH

Gamma Switch (on/off) - The gamma correction switch allows .45 correction for

non-linearity gain response in the monitor when set to ON.

When set to OFF, there is no gamma correction.

NC

AGC Select Switch (Normal/Hi)

AGC Normal: AGC Middle Gain.

AGC High: AGC Max Gain.

Only AGC Switch (Function, s/w No. 8Pin) ON.

AGC Switch (off/on) - The auto gain control switch allows the video signals to

maintain a constant level. This switch is useful when using the camera at low-light

levels and when lighting levels change over time. For best low light conditions,

this switch should set to ON.

AWB Switch (Low/Hi) - This camera have two white balance setting.

ATW (auto tracing white balance) - The camera automatically aim to maintain

white objects as white even if the light color changes. Switch Position "Low"

AWB (auto white balance) - Quick ATW. Switch Position "Hi"

Sync Select Switch (int/LL) - Use this switch to set the camera synchronization

mode internal (int) or Line Lock (LL).

8.

9.

0.

D/N Mode Selection (Auto/Manual)

Auto : D/N mode converse automatically. (AGC must set to ON)

Manual : User can select mode with D/N Conversion Switch.

(Function Pin 2)

D/N Conversion Switch (Color/BW)

D/N Color : Only Color.

D/N B/W : Only B/W.

When D/N Manual Mode. (Function, s/w No. 1Pin)

1.

2.

5.

7.

6.

N

O

2

1

OFF

B/W

OFF

Manual

ON

Color

ON

Auto

* Standard Resolution DSP Color Camera *

Power

Power Source, Consumption : 24VAC +/-10%, 60(50)Hz +/-1Hz,

12VDC +/-10%

3.5Watts

Sensor Information and General

Processing Technology : Sony DSP

Image Sensor : 1/3" interline transfer CCD (sony chip set)

Picture Element : 537(H) x 505(V), NTSC

537(H) x 597(V), PAL

Chip Size : 5.59mm(H) x 4.68mm(V)

Unit Cell Size : 9.6m (H) x 7.5m (V), NTSC

9.8m (H) x 6.3m (V), PAL

Scanning System : 2:1 Interlace

Scanning Frequency : 15.75KHz(H) x 60Hz(V), NTSC

15.625KHz(H) x 50Hz(V), PAL

Sync System : Line Lock / Internal

Vert Phase Adjust Range : 0 deg. To 360 deg.

Electronic Shutter : 1/60(1/50) ~ 1/100000 sec.

Operating Temperature / Humidity : 14F to 122F (-10C to +50C)

/ <96% (non-condensing)

Video

Signal Format : NTSC, 525 Lines / PAL, 625 Lines

Resolution : NTSC, 330TV Lines(Color),

380 TV Lines(B/W)

PAL, 320TV Lines(Color),

360 TV Lines(B/W)

Minimum Illumination : 0.3lux(Color), 0.02lux(B/W) F1.2

Video Output : 1.0 Vp-p, 75 Ohms, unbalanced

LENS : DC A/I Varifocal 4mm-9mm

Lens F2.0~2.8

S/N Ratio : 50dB (AGC Off)

BLC Size : 40% Center

Sync Level : 40 IRE, PAL 300mV

White Clip : 120 IRE, PAL 850mV

SPECIFICATIONS

- 10 -

SPECIFICATIONS

Function

Auto/Man Shutter Control(E.S.) : Auto(On), Man(Off) (Dip Switch)

Manual Shutter Control : 1/60(1/50), 1/100(1/120), 1/250,

1/500, 1/1000, 1/2000, 1/4000,

1/10,000 (Dip Switch)

Flickerless(F.F) : ON/OFF (Dip Switch)

BLC : ON/OFF (Dip Switch)

EI : ON/OFF (Dip Switch)

D/N Conversion : Color / BW (Dip Switch)

AGC : ON/OFF (Dip Switch)

D/N Mode Selection: Auto / Manual (Dip Switch)

White Balance : Low(ATW) / Hi(AWB) (Dip Switch)

Sync : Internal / Line Lock (Dip Switch)

Vert Phase Adjust : Adjustable (POT)

DC Iris Level Adjust : Adjustable (POT)

Connector and Mechanical

Video Output : BNC Connector

Power Input : 2-pin wire

Lens Mount : Fixed Mount

- 11 -

SPECIFICATIONS

* High Resolution DSP Color Camera *

Power

Power Source, Consumption : 24VAC +/-10%, 60(50)Hz +/-1Hz,

12VDC +/-10%

3.5 Watts.

Sensor Information and General

Processing Technology : Sony DSP

Image Sensor : 1/3" interline transfer CCD (sony chip set)

Picture Element : 811(H) x 508(V), NTSC

795(H) x 596(V), PAL

Chip Size : 5.59mm(H) x 4.68mm(V)

Unit Cell Size : 6.35m (H) x 7.4m (V), NTSC

6.5m (H) x 6.25m (V), PAL

Scanning System : 2:1 Interlace

Scanning Frequency : 15.75KHz(H) x 60Hz(V), NTSC

15.625KHz(H) x 50Hz(V), PAL

Sync System : Line Lock / Internal

Vert Phase Adjust Range : 0 deg. to 360 deg.

Electronic Shutter : 1/60(1/50) ~ 1/100,000 sec.

Operating Temperature / Humidity : 14F to 122F (-10C to +50C)

/ <96% (non-condensing)

Video

Signal Format : NTSC, 525 Lines / PAL, 625 Lines

Resolution : NTSC, 480 TV Lines(Color),

530 TV Lines(B/W)

PAL, 470 TV Lines(Color),

510 TV Lines(B/W)

Minimum Illumination : 0.5lux(Color), 0.04lux(B/W) F1.2

Video Output : 1.0 Vp-p, 75 Ohms, unbalanced

Lens : DC A/I Varifocal 4mm-9mm

Lens F2.0 ~ 2.8

S/N Ratio : 50dB(AGC Off)

BLC Size : 40% Center

Sync Level : 40 IRE, PAL 300mV

White Clip : 120 IRE, PAL 850mV

- 12 -

SPECIFICATIONS

Function

Auto/Man Shutter Control(E.S.) : Auto(On), Man(Off) (Dip Switch)

Manual Shutter Control : 1/60(1/50), 1/100(1/120), 1/250,

1/500, 1/1000, 1/2000, 1/4000,

1/10,000(Dip Switch)

Flickerless(F.F) : ON/OFF (Dip Switch)

BLC : ON/OFF (Dip Switch)

EI : ON/OFF (Dip Switch)

D/N Conversion: Color/BW (Dip Switch)

AGC : ON/OFF (Dip Switch)

D/N Mode Selection: Auto / Manual (Dip Switch)

White Balance : Low(ATW) / Hi(AWB) (Dip Switch)

Sync : Internal / Line Lock (Dip Switch)

Vert Phase Adjust : Adjustable (POT)

DC Iris Level Adjust : Adjustable (POT)

Connector and Mechanical

Video Output : BNC Connector

Power Input : 2-pin wire

Lens Mount : Fixed Mount

- 13 -

EXTERNAL DIMENSION

Dimensions

Maximum Camera and

Lens Size

Window Size

Cable Entry

Weight - Unit:

Shipping:

2.6L x 1.65W x 1.65H in.

(6.5L x 4.2W x 4.2H cm)

Unit: mm

0.1 in. (2.5mm thick),

impact-resistant P.C (LEXAN)

3.46 in. (8.8cm) diameter

Two 3/4" conduit fitting for

NPT threaded pipe

1.76 lb. (0.8 kg)

1.98 lb. (0.9 kg)

51.5

94.5

114

88 (Inner)

- 14 -

Vista

Norbain House, Eskdale Road,

Winnersh Triangle, Wokingham

Berkshire RG41 5TS

VISTA VANDAL RESISTANT

DAY & NIGHT DOME CAMERA

Tel: +44 (0) 118 944 0123

Fax: +44 (0) 118 944 0999

www.vista-cctv.com

Vista VVRD4V9DN Installation Instructions Manual

This manual is also suitable for

Vista VVRD4V9DN Installation Instructions Manual

Related papers

Other documents