Contec CPS-PWD-90AW24-01 Owner's manual

Type
Owner's manual
1 CPS-PWD-90AW24-01
CONPROSYS Series
CPS-PWD-90AW24-01 Product Guide
CONTEC CO.,LTD.
Thank you for purchasing this product.
This product is an option product of the following.
Supported Product (Selling separately)
CONPROSYS Series : CPS-MCS341 series
Package Contents
The product you have purchased consists of the following items. Be sure that you have them all. If you
find any item either missing or damaged, please contact the sales representative you purchased the
product from.
- Power Supply1 - DC Cable…1
- Warranty Certificate1 - Product Guide…1
- Serial Number Label…1
*This product requires an AC cable. We have an option product that is an AC cable.
The more details information about option AC cable should look at Web.
Power Supply
DC Cable
Serial Number
label
Product Guide
Product
Guide
Warranty
Warranty
Certificate
Certificate
CPS-PWD-90AW24-01 Product Guide
CPS-PWD-90AW24-01
2
Specifications
Requirement
Description
Power supply space
Rated input voltage
100 to 240VAC, 50 to 60Hz
Permissible input voltage *
85 to 264VAC, 50 to 60Hz
Input current 0.95 A typ (115VAC), 0.55A typ (230VAC)
Rated output voltage 24VDC
Rated output current
3.8A (Max.)
Isolation
Input-Output
3000VAC 1minute 50M (500VDC) (At room temperature)
Input-PE 2000VAC 1minute 50MΩ (500VDC) (At room temperature)
Output-PE 500VAC 1minute 50MΩ(500VDC) (At room temperature)
Environmental specs
Temperature
Operating : -20 to +70°C, non operating : - 30 to + 85°C
Humidity
Operating : 20 to 90%RH (No condensation)
Non operating : 20 to 90%RH (No condensation)
Floating dust particles Not to be excessive
Corrosive gases
None
Vibration resistance 10 to 55Hz / 2.0G
Construction
Length of DC cable (mm)
200 (not include connector)
External dimensions (mm)
50(W)×90(D)×90 (H) (not include projection)
Weight
Main body : 405g Max.
Longevity 8years (temperature 45°C, Input 100VAC, Output 2.85A)
* The derating is required. The more details information about the derating should see at User
s Guide of web.
External Dimensions and Component Identification
[mm]
94.5
48
99
90
90
50
11.2
60
8.3
9.315.7
75.1
7.45
9.3
15.7
(230)
(200)
6.6(Max.)
3.7(Min)
T
erminal
CPS-PWD-90AW24-01 Product Guide
3 CPS-PWD-90AW24-01
Interface
Model CPS-PWD-90AW24-01
Pin No.
1 2 3 4 5
Signal
name
PE AC GND
100 - 240
VAC
+24VDC
DC
GND
Connector Model MC 1,5/3-ST-3,5(PHOENIX CONTACT)
Pin No.
1 2 3
Signal
name
+24V GND FG
Mounting Figure
Disposal
When disposing of the product, follow the disposal procedures stipulated under the relevant laws and
municipal ordinances.
Storage
When storing this product, keep it in its original packing form.
- Wrap it in the packing material, and then put it in the box.
- Store the package at room temperature at a place free from direct sunlight, moisture, shock, vibration,
magnetism, and static electricity.
Red
Black
Green
Terminal tightening torque : 10KgF
cm
CPS-PWD-90AW24-01 Product Guide
CONTEC CO.,LTD. September 2015 Edition
3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan
Japanese http://www.contec.co.jp/
English http://www.contec.com/ NA04404 (LYTC451)
Chinese http://www.contec.com.cn/ [09162015]
No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC CO., LTD.
Handling Precautions
Indicates dos and don'ts that are assumed to result in possible death or serious injury if they are
inappropriately handled ignoring this icon.
- Do not use the product in locations exposed to a flammable or corrosive gas. It may cause explosion,
fire, electrical shock, or malfunction.
- If you sense abnormality (smoke, odor, or noise), immediately unplug the power cord from the wall
outlet and contact the CONTEC sales representative or sales office.
- To avoid electrocution do not use the product with a wet hand.
- Be sure to connect the product to the stipulated power supply voltage. Connecting to a different
voltage might cause a fire or electrical shock.
- Do not use the product with the other power device. It may cause fire or malfunction.
- When the cable or main body is damaged, stop using and repair it immediately. Using it as it is may
cause fire, electrical shock or malfunction.
- Never disassemble or modify the product or replace its parts in order to prevent electrical shock, fire,
or malfunction. CONTEC reserves the right to refuse servicing the product modified by the user. When
any part of the product needs to be replaced at the expiration of its life or due to breakdown, please
contact the CONTEC sales representative or sales office.
- Use the product with the specified models by the CONTEC. Not doing so may cause malfunction.
- Use the product in the specified operating condition (temperature and humidity)
- This product is a device embedded products, it is not a final product.
- If you use other than our specified models, please check detailed information of KH series
(Basic characteristics data * Instruction manual) at the power supply maker web.
https://www.cosel.co.jp/en/products/sub01-26.html
Indicates dos and don'ts that are assumed to result in possible injury or property damage if they are
inappropriately handled ignoring this icon.
- Do not use or store the product in a location exposed to extremely high or low temperature or
susceptible to a rapid temperature change. Example:
- Exposure to direct sun - In the vicinity of a heat source
- When unplugging the cable, hold the plug. Holding and pulling the cable itself can cause a failure such
as discontinuity.
- To clean the product wipe it gently with soft cloth damp with either water or mild detergent.
Do not use chemicals or a volatile solvent, such as benzene and thinner, to prevent peeling or
discoloration of the paint.
- When transporting the product, provide adequate measures to protect it from vibration or shock.
- No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC CO., LTD.
- The information in this document is subject to change without notice.
- All relevant issues have been considered in the preparation of this document. Should you notice an
omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD.
- Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may
appear in this document or for results obtained by the user as a result of using this product.
WARNING
CAUTION
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Contec CPS-PWD-90AW24-01 Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI