KV-005
KVM Switch kit 2 PC - PS/2
8716502002832
2/8
The KVM Switch Kit is ideal for controlling two PC’s in the same working environment. The KVM Switch Kit
saves you a lot of space, because it enables you to operate two PC’s with one single monitor, keyboard and
mouse. Thus you can control, for example, a printer server, a backup system and an internet server without
leaving your workstation. The system gets switched on automatically when you start your PC, or you can
activate it via a combination of keys on a keyboard, or you may activate it manually over the KVM Switch Kit.
1,8 kg.
245,5 (W) x 202,5 (D) x 93 mm (H)
KVM Switch Kit 2 PC - PS/2
1 x 1.8 meters cableset for monitor,
keyboard and mouse
1 x 3 meters cableset for monitor,
keyboard and mouse
User manual
4 kg.
23,2(W) x 19,7 (D) x 21,5 cm (H)
16 kg.
42 (W) x 26,4 (D) x 31cm (H)
2 IBM compatible PC’s
Mouse with PS/2 connection
Keyboard with PS/2 connection
VGA monitor with 15 pin connector
444 gr.
75 (W) x 43 (D) x 120 mm (H)
Data sheet: KV-005
P. 1-2.
The kit is supplied complete with cable sets of 1.8 and 3 meters.
Suitable for PS/2 keyboards
Suitable for PS/2 mouse
Caps-Lock, NUM-lock and other assigned values will be stored in the memory.
Supports all video modes up to 1920 x 1440 @ 200mHz
Signals you when it changes over.
Controls 2 Pc with one keyboard, 1 monitor, and 1 mouse
Complete with high quality cable sets(VGA, 2x PS/2)of 2x1.8 m and 2x3m with PC99 connector colour codes
Maximim resolution 1920x1440
Operated via button on KVm switch or through a keyboard key combination
Metal housing
Supports Microsoft Intellimouse, Microsoft Intellimouse Pro, Logitech Net Mouse, and more
Support hot-plug capability - Add or Remove connected PCs for maintenance without powering down the KVM switch or the PC
Very High Video quality - Up to 1920x1440 with bandwidth of 200Mhz
No Software Required - easy PC selection via push buttons
Auto Scan Mode automatically selects monitors sequentially
Keyboard states automatically saved and restored upon switching
LED display for easy status monitoring
Beep sound for switching port confirmation
Data sheet: KV-005
P. 2-2.
-
1
-
2
