S4 QUICK START GUIDE
Read Me to Get Started Quickly...
1. Charge your S4 until the battery indicator light goes
out (a full charge takes 3-4 hours).
2. Slide the power switch to the ON position.
3. The first time you use it, the S4 will go straight to pair
mode. Follow the instructions to pair your phone.
LET’S GET STARTED...
Touch-Sensitive
Volume Controls
Battery
Indicator
Handsfree
Trigger
Indicator
Bluetooth
Indicator
Microphone
Multi-Function
Button (the
BlueAnt
symbol)
Once pairing is complete your S4 will transfer the
contacts from your phonebook so that it can announce
caller names.
If your phone prompts you to allow a connection to the
S4, you must select “YES” or “OK”:
CALLER NAME ANNOUNCE
Accept connection request
from BlueAnt S4?
YES
NO
Don’t ask this again
Phonebook Access Request
swipe over the
message and
accept the request
BlackBerry devices—select “Don’t
ask this again”, then “YES”:
Android devices—a notification
appears at the top of the screen:
PAIR CODE: 0000
When the phone rings, say Answer or Ignore.
To use the voice commands:
1. Make sure the green handsfree trigger indicator light
is on.
2. Say the handsfree trigger phrase: BlueAnt Speak
To Me.
3. Wait for the S4 to ask you to Say A Command.
4. Say one of the commands loudly and clearly:
VOICE DIALINGUSE YOUR VOICE TO CONTROL YOUR S4
Use the command Phone Commands to activate your
phone’s voice dial feature.
Your phone must support “voice dialing over Bluetooth”.
This feature is supported by the iPhone 3GS (iOS 3.1+)
and iPhone 4, most BlackBerry smartphones, and most
Android devices running Android 2.2 and above.
Once you have activated the voice dial feature, you are
using your phone’s voice recognition software.
Please check your phone manual for help on getting
the most out of this feature and to find out what
commands your phone supports, as well as any
limitations of your phone’s voice recognition software.
> Am I Connected?
> Call Back
> Cancel
> Check Battery
> Favorites
> Pair Me
> Phone Commands
> Redial
> Sensitivity Level
> LED Light
> Update Phonebook
> What Can I Say?
“HOW-TO VIDEOS FOR YOUR BLUEANT DEVICE”
NEED MORE HELP?
www.blueantwireless.com/geekspeak
Version: S4-QSG-EN-2.0
/