Dustbane Products Ltd., 25 Pickering Pl., Ottawa, ON K1G 5P4
•
Tel: 1-800-387-8226 Fax: 1-800-363-5309 www.dustbane.ca
INSTALLATION INSTRUCTIONS
Water Tank – Integra Series
Document #: II-20029
Reference Document: ---
Date of Issue: 08/05/2020
Applicable Equipment: Integra Series
Applicable Part/Kit#: 19202
MOUNT KITS FOR LA MOUNT KITS FOR TX
• Hose, valve assembly common to both units
• U-Bolt in main package is used strictly on the LA handle
• Assembly instructions enclosed
• U-Bolt and white Teflon block in second package is used strictly on the TX
handle
• Assembly instructions for TX handle
• Both kits will be combined to make one universal kit
INITIAL INSTALLATION CONT.
1. Attach U-Bolts to handle with block as shown. Upper U-Bolts should be
tight to switch box.
2. Put tank on and install washers, wing nuts loosely. Assemble lower U-Bolt,
washer and wing nuts. Tighten all 4 wing nuts and install rubber caps on
thread.