Electro-Voice EVID 3.2 Assembly Instruction

Brand: Electro-Voice

Model: EVID 3.2

Category: Soundbar speakers

Type: Assembly Instruction

This manual is also suitable for

EVID SOS 3.2 Series

Electro-Voice EVID 3.2 is a versatile near-field monitor with a ¼" input jack, volume control, and adjustable swivel for precise positioning. Mount it on a microphone stand for convenient placement in any application. Use the included boom adapter to attach an optional boom and microphone, ensuring proper balance with the adjustable counterweight. The EVID 3.2 delivers clear and accurate sound for personal monitoring or small group listening.

EVID 3.2 SOS Monitor and MA-3 Mic Stand Adapter

The EVID 3.2 SOS is a near-field monitor with volume control and

¼ input jack that can be easily mounted on a microphone stand

for convenient placement anywhere. An adjustable swivel lets you

mount it at exactly the right angle for any application. A boom

adapter is also included to mount an optional boom and

microphone (not included)*

MA-3 Mic Stand Adapter kit lets you mount any standard EVID 3.2

on a microphone stand for easy placement anywhere you need it.

MA Series

SOS 3.2 Series

Assembly Instructions

:sedulcnItiK3-AM

metIytQnoitpircseD

11 retpadAdnatSciM

21 retpadAmooB

32 ).D.I"52.,.D.O"88.(rehsaWtalF

:sedulcnIrotinoMSOS2.3DIVE

metIytQnoitpircseD

11 retpadAdnatSciM

21 retpadAmooB

32 ).D.I"52.,.D.O"88.(rehsaWtalF

41 kcaJ"4/1htiw,rotinoM2.3DIVE

51 tnuoMenohporciMfoorP-kcohS

1/4” Input Jack

Volume Control

Knob

Positioning for Boom and Microphone EVID 3.2 SOS Rear Panel Detail

*To ensure proper balance, when a

boom and microphone are attached, the

EVID must be angled upward and the

booms counterweight properly

positioned as shown.

Correct Incorrect

CAUTION: This system is rated for 75W RMS.

When connecting the EVID 3.2 SOS to the

amplifier, make sure that the amplifiers

power output does not exceed this rating.

U.S.A. and Canada only. For customer orders,

contact the Customer Service department at

800/392-3497 Fax: 800/955-6831

Europe, Africa and Middle East only. For customer orders,

contact the Customer Service department at

49 9421-706 0 Fax: 49 9421-706 265

For warranty information, contact the Service Repair department at:

616/695-6831 or 800/685-2606

For technical assistance, contact Technical Support at:

866/78AUDIO

Specifications subject to change without notice.

12000 Portland Avenue South, Burnsville, MN 55337

Phone: 952/884-4051, Fax: 952/884-0043

www.electrovoice.com

Part Number 38110-087 Rev C

Mounting a Microphone and Boom to your EVID (MA-3 and SOS)

Step 1:

Attach the Boom Adapter (Item 2) to the top

of the EVID with a flat washer (Item 3) in

between the Adapter and the EVID.

Step 2:

Mount the Boom (Not Included) to the Boom

Adapter (Item 2).

Step 3:

Replace any microphone mount with the

Shock-Proof Mic Mount (Item 5, EVID 3.2

SOS only).

Item 1

Item 4

Item 3

Item 2

Item 5

(Included only with

EVID 3.2 SOS

Monitor Package)

Boom

(Not Included)

Mic Stand Mounting (MA-3 and SOS)

Step 1:

Attach the Mic Stand Adapter (Item 1) to

your microphone stand (not included).

Step 2:

Attach the EVID 3.2 (or the 3.2 SOS) to the

Mic Stand Adapter using one flat washer

(Item 3) in-between the Adapter and the

EVID.

Step 3:

Use the adjustment knob to adjust the angle

of the EVID.

If not attaching a boom to the EVID, attach

Logo Cap as shown.

Item 1

Item 4

Item 3

Adjustment

Knob

Logo Cap

(Included with

standard EVID 3.2)

Electro-Voice EVID 3.2 Assembly Instruction

Brand: Electro-Voice

Model: EVID 3.2

Category: Soundbar speakers

Type: Assembly Instruction

This manual is also suitable for

EVID SOS 3.2 Series

Download PDF

report

Electro-Voice EVID 3.2 Assembly Instruction

This manual is also suitable for

Electro-Voice EVID 3.2 Assembly Instruction

Related papers