Page is loading ...
SHARR
srs
W0W HD
SrS_ is a trad .... k of SRS Labs, Inc.
WOW HI
ENERGY STAR e Program information
Products that have earned
the ENERGY STAR _ are
designed to protect the
environment through
superior energy efficiency.
ENERGY STAR e is a U.S. registered mark,
WOW HD technology is incorporated under licensefrom SRS Labs, Inc.
Note: This product is recommended for flat panel TV (LCD and plasma),
Pleaseconfirmthatonlythefollowingaccessoriesareincluded.
Remote control x 1
(RRMCGA235AWSA)
Wail mount angle x 2
(LANGKA167AWFW)
RCA cable
(2 pins - 2 pins) x 1
(QCNWGA041AWPZ)
©©
©©
Foot cushion x 4
(PCUSSA118AWZZ)
AC/DC adaptor x r
(RADPAA061AWZZ)
Pattern paper x 1
(TCAUHA022AWZZ)
AC power cord x 1
(QACCDA005AWZZ)
_ _ Nut
( Spike + Nut ) x 4
(CLEGMA005AW02.
Length: 25 mm)
SHARP CORPORATION
Printed in Malaysia
TINSZA877AWZZ 10M RAS
equipment does cause harmful interference
CAUTION to radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
The Eightnk_g flash with arrowhead symbol, O Reorient or relocate the receiving
wit hk_ an equilateral t riangEe, Js intended to
alert the u_r to the presef_ce of uninsulated antenna.
_dangerous voltage" within the product's O increase the separation between the
enclosure that may be of sufficient
magf_itude to constitute a risk of electric equipment and receiver.
shock to persons.
_1_ The exclamation p3k_t within an equilateral _ Connect the equipment into an outlet
triangle is k/tended to aler[ the u_r to on a circuit different from that to which
the presen_ of imi:_or[ant operatin 9 af_d
mainte{_a{_ce (_rvicing)instructions in the the receiver is connected.
literature a_ompaf_ying the appliaf_ce.
.........................................................................................................................................................................® Consult the dealer or an experienced
WARNING : TO REDUCE THE RISK OF radio/TV technician for help.
FIRE OR ELECTRIC SHOCK, DO NOT WARNING
EXPOSE THISAPPLIANCE TO RAIN OR FCC Regulations state that any
MOISTURE. unauthorized changes or modifications
to this equipment not expressly approved
NOTE by the manufacturer could void the user's
This equipment has been tested and found authority to operate this equipment.
to comply with the limits for a Class Bdigital
device, pursuant to Part 15 of the FCC FOR YOUR RECORDS
Rules. These limits are designed to provide Foryour assistance in reporting this unitin
reasonable protection against harmful case of loss or theft, please record below
interference in a residential installation, the model number and serial number
which are located on the rear of the unit.
This equipment generates, uses, and can
Please retainthis information.
radiate radio frequency energy and, if not Model number .............................
installed and used in accordance with the Serial number .............................
instructions, may cause harmful interference Date of purchase .............................
to radio communications. However, there Place of purchase .............................
is no guarantee that interference will not
occur in a particular installation, if this
Explanation of Graphical Symbols:
TM
SRS WOW HD significantly improves the playback quality ofaudio, delivering a dynamic 3D
entertainment experience with deep, rich bass and high frequency clarity for crisp detail.
Electricityisusedtoperformmanyuseful
functions,butitcanalsocausepersonalinjuries
andpropertydamageifimproperlyhandled.This
producthasbeenengineeredandmanufactured13)
withthehighestpriorityonsafety.However,
improperusecanresultinelectricshockand/or
fire.Inordertopreventpotentialdanger,please14)
observethefollowinginstructionswheninstalling,
operatingandcleaningtheproduct.Toensure
yoursafetyandprolongtheservicelifeofthis
product,pleasereadthefollowingprecautions
carefullybeforeuse.
1) Readtheseinstructions.
2) Keeptheseinstructions.
3) Heedallwarnings.
4) Followallinstructions.
5)Donotusethisapparatusnearwater.
6) Cleanonlywithdrycloth.
7) Donotblockanyventilationopenings.Install
inaccordancewiththemanufacturer's
instructions.
8) Donotinstallnearanyheatsourcessuch
asradiators,heatregisters,stoves,or
otherapparatus(includingamplifiers)that
produceheat.
9) Donotdefeatthesafetypurposeof
16)
thepolarizedorgrounding-typeplug.A
polarizedplughastwobladeswithone
widerthantheother.Agroundingtype
plughastwobladesandathirdgrounding17)
prong.Thewidebladeorthethirdprong
areprovidedforyoursafety.Iftheprovided
plugdoesnotfitintoyouroutlet,consultan
electricianforreplacementoftheobsolete
outlet.
10)Protectthepowercordfrombeingwalked18)
onorpinchedparticularlyatplugs,
conveniencereceptacles,andthepoint
wheretheyexitfromtheapparatus.
11)Onlyuseattachments/accessories
specifiedbythemanufacturer.
12)Useonlywiththecart,
stand,tripod,bracket,
ortablespecifiedbythe
manufacturer,orsoldwith
theapparatus.Whenacartisused,use
cautionwhenmovingthecart/apparatus
combinationtoavoidinjuryfromtip-over.
Unplugthisapparatusduringlightning
stormsorwhenunusedforlongperiodsof
time.
Referallservicingtoqualifiedservice
personnel.Servicingisrequiredwhen
theapparatushasbeendamagedinany
way,suchaspower-supplycordorplug
isdamaged,liquidhasbeenspilledor
objectshavefallenintotheapparatus,the
apparatushasbeenexposedtorainor
moisture,doesnotoperatenormally,orhas
beendropped.
AdditionalSafetyInformation
15)PowerSources-Thisproductshould
beoperatedonlyfromthetypeofpower
sourceindicatedonthemarkinglabel.
Ifyouarenotsureofthetypeofpower
supplytoyourhome,consultyourproduct
dealerorlocalpowercompany.Forproduct
intendedtooperatefrombatterypower,
orothersources,refertotheoperating
instructions.
Overloading-Donotoverloadwalloutlets,
extensioncords,orintegralconvenience
receptaclesasthiscanresultinariskof
fireorelectricshock.
ObjectandLiquidEntry-Neverpush
objectsofanykindintothisproductthrough
openingsastheymaytouchdangerous
voltagepointsorshort-outpartsthatcould
resultinafireorelectricshock.Neverspill
liquidofanykindontheproduct.
DamageRequiringService-Unplugthis
productfromthewalloutletandrefer
servicingtoqualifiedservicepersonnel
underthefollowingconditions:
a)WhentheACcordorplugis
damaged,
b) Ifliquidhasbeenspilled,orobjects
havefallenintotheproduct,
c) Iftheproducthasbeenexposedto
rainorwater,
19)
2o)
21)
22)
d) If the product does not operate
normally by followingthe operating
instructions. Adjust only those
controls that are covered by the
operatinginstructionsasan improper
adjustment of other controls may
result in damage and wil] often
requireextensivework by a qualified
techniciantorestoretheproducttoits
normaloperation,
e) If the producthas been droppedor
damagedin anyway,and
f) When the productexhibitsa distinct
changein performance-thisindicates
aneedfor service.
ReplacementParts - When replacement
parts are required, be sure the service
technician has used replacement parts
specified by the manufactureror havethe
same characteristicsas the original part.
Unauthorizedsubstitutions may result in
fire,electricshock,or otherhazards.
Safety Check - Upon completionof any
serviceor repairsto this product,ask the
servicetechnicianto performsafetychecks
to determine thatthe productis in proper
operatingcondition.
Wall or ceilingmounting- When mounting
the producton awalt or ceiling,be sureto
instaltthe productaccordingtothe method
recommendedbythe manufacturer.
PowerLines -An outsideantennasystem
should not be located in the vicinity of
overheadpowerlinesorother electriclight
or powercircuits, or where it can fall into
suchpowerlinesorcircuits.Wheninstalling
an outsideantenna system,extreme care
shouldbe takentokeepfromtouchingsuch
powerlinesor circuitsascontactwiththem
might befatal.
23)
24)
ProtectiveAttachmentPlug- Theproductis
equipped with an attachmentplug having
overloadprotection.Thisisa safetyfeature.
See instructionManualfor replacementor
resettingofprotectivedevice.Ifreplacement
ofthe plugis required,be surethe service
technician has used a replacementplug
specifiedby the manufacturerthathas the
same overload protectionas the original
plug.
Stand - Do not place the producton an
unstablecart,stand,tripodortable. Placing
the productonan unstablebasecan cause
the product to fall, resulting in serious
personal injuries as well as damage to
the product.Use onlya cart, stand,tripod,
bracket or table recommended by the
manufacturerorsoldwiththeproduct.When
mountingthe producton a walt,be sure to
followthe manufacturer'sinstructions.Use
onlythemountinghardwarerecommended
by themanufacturer.
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that tMs Sharp brand product (the
"Product"), when shp n its orig hal container, will be free from defective workmansh p and materials, and agrees that t wlL
at ts option, either repar the defect or replace the defective Product or part thereof wth a new or remanufactured equ valent
at no charge to the purchaser for parts or labor for the period(s) set forth below
Ths warranty does not apply to any appearance items of the Product nor to the add tional excluded tern(s) set forth below
nor to any Product the exterior of which has been damaged or defaced, which has been subjected to mproper voltage or
other m suse, abnormal service or handling, or whch has been altered or mod fied n design or construction
In order to enforce the rights under ths Imted warranty, the purchaser should follow the steps set forth below and provide
proof of purchase to the servicer
The lim ted warranty described herein is n add tion to whatever mplied warranties may be granted to purchasers by law
ALL iMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABiLiTY AND FITNESS FOR USE ARE
LIMITED TO THE PER]OD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW Some states do not allow
Iim tations on how long an mplied warranty lasts, so the above lim tation may not apply to you
Neither the sales personnel of the seller nor any other person s authorized to make any warranties other than those
described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and
exclusive remedy avalable to the purchaser Correction of defects, in the manner and for the period of time described
here n, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the
Product, and shall constitute full satisfaction of all cla ms, whether based on contract, negligence, strict liability or othel_wise
In no event shall Sharp be liable= or n any way responsible, for any damages or defects in the Product which were caused
by repairs or attempted repa rs peHormed by anyone other than an authorized servicer Nor shall Sharp be liable or in any
way responsible for any ncidental or consequential econom c or property damage Some states do not allow the exclusion
of ncidental or consequential damages, so the above exclusion may not apply to you
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE
Modet Specific Section
Your Product Model Number & Description:
Warranty Period for this Product:
Additionai Item(s) Excluded from Warranty Coverage
(if any):
Where to Obtain Service:
HT-SB25O(BK) Sound Bar System
(Be sure to have ths nformation available when you need
sew_ce for your Product)
One ( 1) year parts and labor from the date of purchase
Nomfunctional accessories, supplies, and consumable
items
At a Sharp Authorized Servicer located in the Unted States
To find a location of the nearest Sharp Authorized Servicer,
call Sharp toll free at 1-sg0=BE-SHARP
Shp prepa d or carry n your Product to a Sharp Authorized
Servicer Be sure to have Proof of Purchase available If
you shp the Product, be sure }t }s }nsured and packaged
securely
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwa_], N_ Jersey 074951163
® Usetheuniton afirm,levelsurfacefreefrom
Please ensure that the equipment is
positioned in a well-ventilatedarea and
ensurethat there is at least 4" (10 cm) of
free spacealongthe sides andtop of the
equipment.
®
10cm(4") •
10cm(4") 10cm(4") _ ®
vibration.
Keep the unit away from direct sunlight,
strong magnetic fields, excessive dust,
humidityandelectronic/electricalequipment
(home computers, facsimiles, etc.) which
generateelectricalnoise.
Donot placeanythingon topof theunit.
Do not expose the unit to moisture, to
temperatureshigherthan 140°F(60°C) or
to extremelylowtemperatures.
• If your system does not work properly,
disconnecttheACpowercordfromtheAC
outlet.PlugtheACpowercordbackin,and
thenturnonyoursystem.
®Incaseofanelectricalstorm,unptugtheunit
forsafety.
®HoldtheACpowerplugbytheheadwhen
removingitfromtheACoutlet,aspullingthe
cordcandamageinternalwires.
®TheACpowerplugisusedasadisconnect
deviceandshallalwaysremainreadily
operable.
®Donotremovetheoutercover,asthis
mayresultinelectricshock.Refer
internalservicetoyourlocalSHARP
servicefacility.
®Thisunitshouldonlybeusedwithinthe
rangeof41°F-95°F(5°0-35°C).
foranydamageresultingfromuseofthis
unitwithavoltageotherthanthatwhichis
specified.
®ThesuppliedAC/DCadaptorcontains
nouserserviceableparts.Neverremove
coversunlessqualifiedtodoso.Itcontains
dangerousvoltages,alwaysremovemains
plugfromthemainoutletjackbeforeany
serviceoperationorwhennotinusefora
longperiod.
®TheAC/DCadaptorsuppliedwiththeHT-
SB250(BK)mustnotbeusedwithother
equipment.
® NeveruseanAC/DCadaptorotherthanthe
onespecified.Otherwise,problemorserious
hazardsmaybecreated.
Warning:
®Thevoltageusedmustbethesameasthat
specifiedonthisunit.UsingthisproductThesoundlevelatagivenvolumesettingdepends
withahighervoltageotherthanthatwhichonunitefficiency,location,andvariousother
isspecifiedisdangerousandmayresultfactors.Itisadvisabletoavoidexposuretohigh
inafireorothertypeofaccidentcausingvolumelevels,whichoccurswhileturningtheunit
damage.SHARPwillnotbeheldresponsibleonwiththevolumecontrolsettinguphigh,orwhile
continuallylisteningathighvolumes.
Reference page
1. Standard Indicator .................................. 12
2. Qnema/Game Indicator ......................... 12
3. Information Display ................................ 12
4. Sport Indicator ........................................ 12
5. News Indicator ........................................ 12
6. On/Stand-by Button ................................ 11
7. Volume Down Button ............................. 11
_2_3 _4 _4 _3_ 8. Volume Up Button ..................................11
,_._l_l 9. SurroundButton.....................................12
10. Function Button......................................12
11. RemoteSensor
12. Left Front Speaker
13. Bass Reflex Duct
14. Subwoofers
15. Right Front Speaker
Referencepage
1.AudioLineIn2Jack.................................9
2.LineIn1Jacks.........................................9
3.DCInputJack........................................10
Remotecontrolf
Plasticshield
Referencepage
1.RemoteControlTransmitter
2.Cinema/GameButton.............................12
3.StandardButton.....................................12
4.VolumeUpButton..................................12
5,SubwooferLevelDownButton.............12
6.VolumeDownButton.............................12
7.Bass/TrebleButton.................................12
8.TVOperationButtons..............................6
9.On/Stand-byButton................................11
10.SportButton............................................12
11.NewsButton...........................................12
12.SubwooferLevelUpButton..................12
13.DimmerButton.......................................11
14.MuteButton.............................................12
15.LineButton..............................................12
Note: Batteryhoider
Beforeusingremotecontrol,pleaseremoveplasticshieldatbatteryhoider.
TVOperationButtons(OnlySHARPTV):
On/Stand-bySetstheTVpowerto InputSelectButtonPressthebutton
Button "ON"or"STAND-BY". (TV) toswitchtheinput
_,2#_y source.
Q
VolumeUpand Turnup/downtheTV ChannelUp andDown Switchup/downthe
DownButtons volume. Buttons TVchannels.
®
Note: • Some modelsofSHARPTV maynotbe operable.
• SHARPTV remotecontrolwill notworkwithHT-SB250(BK)system.
MakesuretounplugtheACpowercord
beforeinstallingthe unit or changing the
position.
Selectfromthreeinstallationmethodsaccording
to thepreferredposition.
Nuts (securedon spikes) must be used when
installingspikes.
The unit can be levelledby adjustingthe spikes
andnuts.
Note:
Option 1oroption2footcushionpositionsbased
on LCDTV stand.
Tomount the unit onthe wall ]
Caution:
® Bevery carefulto preventthe unit [4.19Ibs.
(1.90kg)]fromfallingwhenmountingon the
wall,
® Beforemounting,checkthewallstrength,(Do
notputon theveneerplasterorwhitewashed
wall.The unitmay fall.) If unsure,consulta
qualifiedservicetechnician.
® Mounting screws are not supplied. Use
appropriateones.
® Check all wall mount angle screws for
looseness.
® Selectagood location.If not,accidentsmay
occurortheunitmaygetdamaged.
® SHARP is not responsible for accidents
resulting fromimproper installation.
Tightenallspikesasshown
Notes:
® Option1oroption2indicatesspikepositions
basedon LCDTV stand.
® Whenattachingthespikes,placetheunit on
acushionor softcloth toavoiddamage.
Caution:
When usingthese spikeson glossyor slippery
tablesuch asonglasstop,stickfootcushionsat
the bottomof thespikesto avoidslippage.
SHARPdesignedtheunitssoyoumayhangthem
on thewall.Useproperscrews(notsupplied).See
belowfor sizeandtype.
1/8"(3.2mm)
(5 mm)_ 3/8"(9 mm)
Min.7/8"(22 ram)
I Usingfoot cushions I
1 Fixthe patternpapertothewall in horizontal
positionas below.
44 mm
509
Wall surface 44 mm 29 mm
29 mm
Attachfoot cushionsas shown __
Pattern paper
2 Makeaholeonthewallfollowingthescrew
pointmarksonthepatternpaperbyusing
adrill.
1-1/4"(32ram)
Fixawallmountplugintotheholeusing
ahammer,untilitisflushwiththewall
surface.
1-1/4"(32ram)
4 Screwthewallmountangletothewallas
shownintheillustration.(Totalscrewis8
pieces)
1 Alignthewallmountslotattheunittothe
2
3
wallmountangle.
Slottheunit intothewallmountangle.
Fixthemsecurely.
Wallsurface ....
Installation image:
Place the unit as shown.
Note:
Make sure all screws are fully tightened.
(screws are not supplied)
Notes:
® As the sound from the unit is omni-
directional, you can place the unit
anywhere you like. However, it is
recommended to place it as close to
the TV as possible.
® The front panel of the unit is not
removable.
Caution:
® Do not change the installation direction
when the unit is turned on.
® Do not stand or sit on the unit as you
may be injured.
Safety wires (not supplied) are useful to prevent
the unit from falling off the table.
_ Loop the safety wires (not supplied) into each
.... _ hole as shown and tie the safety wires to the
.....I LCD TV stand.
Caution: Notes:
Tum off all other equipment before making any ® To connect to TV, use either LiNE IN 1
connections, jacks or AUDIO LINE IN 2 jack only.
Tuner receiving for other audio system ® Refer the operation manual of the
® Placing the antenna near the unit AC equipment to be connected.
power cord may cause noise pick up. ® Fully insert the plugs to avoid fuzzy
Place the antenna away from the unit for pictures or noises.
better reception.
IftheTV/monitorhasan audiooutput,connectit
to the LINE IN1jacks on the rearof the unit.
IftheTV/monitorhasheadphonejack,connectitto
the LINEIN2jack onthe rearofthe unit.
Sound bar
Sound bar
ToselectLINEIN1function:
• Onthe unit:PressFUNCTIONbuttonrepeatedly
until"LI" isdisplayed.
• On remotecontrol:PressLINEbuttonrepeatedly
until"LI" isdisplayed.
To select LINEIN2 function:
• On theunit:Press FUNCTIONbutton repeatedlyuntil
"L2"is displayed.
• On remotecontrol:Press LINEbuttonrepeatedlyuntil
"L2"is displayed.
Notes:
• if theTV volume iscontinuously in low level,the unit
will automaticallypower off. Increasethe TV output
volumeto enjoythe soundfrom the unit.
• Iftheunitvolumeis continuouslyinveryhigh level,the
unitwillmute andrecoverafter 3 seconds.
Aftercheckingalltheconnectionshavebeenmade
correctly,connectthe AC power cord tothe AC
powerinputjack,thentothe ACoutlet.
_ Plug the AC power cord into the AC/DC
adaptor.
Plugthe AC/DC adaptorcable intothe DC
INPUTjackon the unit.
(_) PlugtheAC powercordinto anACoutlet.
AC/DCAdaptor
DC INPUTjack
(DC 12V)
AC outlet ~ 50/60Hz)
Caution:
Ifthis productis to be usedin otherthan 120V
region,please changethe ACpowercord tosuit
the region.
The AC powercord part codesfor 220 - 240V
regionareasfollow :
1) QACCEAOg2Awog (For Europe and Latin
Americaregion)
2) QACOBAO05AWgO(Per United Kingdom
region)
3) QACOLAO02Awgg(ForAustraliaregion)
Notes:
® There will be no indication during power
stand-by mode unless the ON/STAND-BY
buttonis pressed.
® Unplug the AC/DC adaptor from the AC
outlet if the unit will not be used for a
prolongedperiodoftime.
® UseonlythesuppliedAC/DCadaptor.Using
otherAC/DC adaptormaycausean electric
shockor fire.
This productcontainsaCR CoinLithiumBattery
which contains Perchlorate Material - special
handling may apply, California residents,see
www.dtsc.ca.gov/hazardouswaste/perchlorate/
1 Insertpin intothe holeas shownandpullto
openthebatteryholder.
remotecontrol __'_l
2 Remove the old battery from the battery
holder, insert the new battery and then
slidethebatteryholderbackinto theremote
control.
Batteryholder ___ Batterytype
-I-- Lockingtab
Polarity(+)symbol
(+) siie up
@
Precautions for battery use:
Removethe batteryif theunitwill notbe usedfor
a longperiod oftime.This witl preventpotential
damageduetobatteryleakage.
Caution:
• Do not use rechargeablebattery (nickel-
cadmiumbattery,etc.).
® Dangerof explosionif batteryis incorrectly
replaced.
® Replaceonly with the same or equivalent
type.
® Batteries(batterypackorbatteriesinstalled)
@
shallnotbe exposedto excessiveheatsuch
assunshine,fire or thelike.
® Installingthe batteryincorrectlymay cause
theunit tomalfunction.
Notes concerning use: VOL.+
® Replacethebatteryiftheoperatingdistance ON,STANO-B_" I
iS reduced or if the operation becomes T
erratic. Purchase "OR 2025", coin lithium ÷_
battery.
® Periodically clean the transmitter on the
Press the ON/STAND-BYbutton.
remote controland the sensor on the unit Thesoundmodeindicatoranddisplaylightup.
witha softcloth.
® Exposingthe sensoron the unit to strong Note:
light may interferewith operation.Change If thepowerdoesnotturnon, checkwhetherthe
thelightingor thedirectionof the unit ifthis powercordis pluggedin properly.
occurs. Toset the unitto stand-by mode:
® Keeptheremotecontrolawayfrommoisture, ® Pressthe ON/STAND-BYbuttonagain.
heat,shock,andvibrations.
PresstheDIMMERbuttontoadjustthebrightness
ofthedisplayandsoundmodeindicator.
i ound mode indicatorand displaybright
Soundmodeindicatoranddisplaydim
Soundmodeindicatoranddisplayoff.Pressing
any button will light up the display for 3
secondsonly.
Ifyou turnoff andon theunit withthevolumeset
to40 orhigher,the volumestartsat20 andfades
in tothelast setlevel.
Unit operation:
Pressvolumeup (VOL.+ )to increasethevolume
andpressvolumedown(VOL.- )todecreasethe
volume.
00_01_02 ..... _59_60
Remotecontroloperation:
PresstheVOLUME+ buttontoincreasethevolume
andtheVOLUME- buttontodecreasethevolume.
The volumeis muted temporarily ._ _ _ ,_/
when pressingthe MUTEbutton i_
ontheremotecontrol.Pressagain
to restorethe volume. _, _ , _ _
Pressthe _ _5
BASS/TREBLE ---_
buttontoselect _
"BASS".
Within 5 seconds, press the VOLUME
(+ or -) button to adjust the bass.
1 Pressthe
Mainunit operation: BASS/TREBLE
To change to a different mode, press the buttontoselect
SURROUNDbutton repeatedlyuntilthe desired "TREBLE".
soundmodelightsup. 2
Remotecontrol operation:
Press a desired sound mode on the remote
control.
STA"'DARD WOWHDis onfornominal
r effect
ClNEM_/GAMEWOWHDonfor cinema/
gamesoundeffect
WOWHDon forsport
L SPORT broadcasting
N_a WOWHDon fornews
The unitlevelcan beadjusted.
To increase the level, press I !-':ll
the SUBWOOFER LEVEL
/_ button. -s_-4. _ 4_s
To decrease the level,press
the SUBWOOFERLEVELx/button.
Note:
When soundfromtheunit is distorted,decrease
the subwooferlevel.
Within 5 seconds, press the VOLUME
(+ or -) button to adjust the treble.
iiiiiiii iii_!_i_i!i!iiiill
When the FUNCTION LINE1 [_
button on unit or LINE _ !
button on the remote
control is pressed,the LIE 2
inputsourcewillchange.
|
Press the FUNCTION
buttonon unitorLINEbuttonon theremotecontrol
repeatedlyto selectdesiredinputsource.
Note:
The backupfunctionwill protectthe memorized
functionmodefor a few hoursshould therebe
a power failureor the AC power cord becomes
disconnected.
Auto power on function:
When you pressthe LINE buttonon the remote
control,theunit wiltturnson atlastfunction.
Auto power off and auto detect signal:
® tfno signalisdetectedfor20 minutesduring
poweron, the unit will automaticallygo to
stand-by mode. The STAND-BYindicator
turns red.
® The unit will automaticallypower ON if
it detects audio signal from connected
equipment,unlessit isturnedoffmanually.
Manypotentialproblemscanberesolved
bytheownerwithoutcallingaservice--
technician.
Ifsomething iswrong with this product, check
the following before calling your authorized
SHARP dealer or service center.
Symptom
No sound is
heard.
Possible cause
• Is the input signal
(selection) set
properly?
® lsthe volume
level setto "0"?
• Is muting
activated?
Noise is ®
heard during
playback.
When a button •
is pressed, the
unit does not
respond.
The power is ®
not turned on.
O
Move the unit
away from any
computers or
mobile phones.
Set this unit to
the stand-by
mode and then
turn it back on.
Is the unit
unplugged?
(Refer to page
10.)
The protection
circuit may be
activated. Unplug
and plug in the
power cord again
after 5 minutes or
more.
Symptom
The remote
control does
not operate
properly.
Possible cause
The unitcannot ®
be turned on
with the remote
control. •
TV cannot be ®
operated with
the remote
control.
® Isthe battery
polarity correct?
® Isthe battery
dead?
® Is the distance or
angle incorrect?
® Arethere any
obstructions in
front of the unit?
® Is there a strong
light shining
on the remote
sensor?
• Isthe remote
control for
another
equipment used
simultaneously?
Is the AC power
cord of the unit
plugged in?
Is the battery
inserted?
Depending on
the model, some
or all functions
may not be
operable using
the remote
control of this
unit. In this case,
use the remote
control supplied
with the TV.
Suddentemperaturechanges,storageor
operationinanextremelyhumidenvironment
maycausecondensationinsidethecabinet
oronthetransmitterontheremotecontrol.
Condensationcancausetheunittomalfunc-
tion.tfthishappens,leavethepoweronuntil
normalplaybackispossible(about1hour).
Wipeoftanycondensationonthetransmitter
withasoftclothbeforeoperatingtheunit.
Whenthisproductissubjecttostrong
externalinterference(mechanicalshock,
excessivestaticelectricity,abnormalsupply
voltageduetolightning,etc.)orifitis
operatedincorrectly,itmaymalfunction.
Ifsuchaproblemoccurs,dothe
following:
1 Settheunittothestand-bymode
andturnthepoweronagain.
2 If the unit is not restored in the
previous operation, unplug and
plug in the unit, and then turn the
power on.
Periodically wipe the cabinet with a soft
cloth.
Caution:
® Do not use chemicals for cleaning
(gasoline, paint thinner, etc.). It may
damage the cabinet finish.
® Do not apply oil to the inside of each
component. It may cause malfunctions.
Make sure to disconnect all audio input
cables attached tothe unitbefore performing
the factory reset.
1. Press the ON/STAND-BY button to enter
the power stand-by mode.
2. While pressing the SURROUND button,
press andhold the ON/STAND-BY button
until "CL" appears.
SURROUND ON/STA_D BY |
Caution:
This operation will erase all data stored in
memory.
Whenyoufailtoperformoperationsproperly,thefollowingmessagesaredisplayedon
theunit.
Display Meaning
® Malfunctionofthesurroundcircuit.Placetheunit
_or _ or_ awayfromnoisesourceandplugtheAOpower
cordintoanotherACoutlet.(*)
i
_1 ® When the protection circuit of the amplifier is
activated.
Power indicator (blinks red)
(*): Should the same message appear even if the unit is unplugged and plugged in or '
set to the stand-by mode and on again, contact your local dealer where you purchased
the unit.
As part of our policy of continuous improvement,SHARP reservesthe rightto make design and
specification changes for product improvement without prior notice, The performance specifica-
tion figures indicatedare nominalvalues of production unit.Theremay be somedeviations from
these values in individual unit,
2,1-waySpeakerSystem
FrontSpeakers:1-1/2"
(40mm)Full Range
Impedance:12ohms/
Channel
Subwoofer:2-1/4"(57 mm)
Woofer(x4)
Impedance:3ohms
Input Analog input(LINE1):
terminals RCAtype x1pair(L/R)
500mV/ 47 kohms
Analog input(LINE2):
Stereominijack _ 3.5mm
100mV/47 kohms
Dimensions Width:33-1/2"(851mm)
Height:3-3/4"(96 mm)
Depth:2-3/4"(70 mm)
Weight 4.19 Ibs.(f.90 kg)
/
