Contec CPS-MG341-ADSC1-931 Reference guide

Reference Manual

(Software)

CONTENTS

M2M Gateway Series

Integrated type

Firmware version 3.0.0 or later

Introduction .................................................................. 8

Safety Precautions .................................................... 17

Set the Computer Network ................................... 21

CONPROSYS WEB Setting ..................................... 27

Easy Data Process and Control ......................... 118

Monitoring Edit ...................................................... 168

Tag Edit ...................................................................... 181

Collecting Information From PLC .................... 189

Transferring Measured Data to Server........... 199

Using The Product As OPC UA Sever ............. 209

Set the Auto Send Mail ....................................... 221

Connecting to Azure IoT Hub ........................... 226

MTConnect ............................................................... 242

FTP Communication ............................................. 246

MQTT Publish And Subscribe ........................... 251

Set Up Troubleshooting ...................................... 285

Appendix ................................................................... 289

Customer Support and Inquiry ......................... 330

Index ........................................................................... 332

— 2 —

Table of Contents

Introduction ....................................................................... 8

1. Product Outline ....................................................................................................................................................... 9

1. An Example Of System Composition ....................................................................................................... 9

2. Gateway Series Function ............................................................................................................................ 10

2. Manual Composition .......................................................................................................................................... 11

3. Procedure Until Ready To Use ........................................................................................................................ 13

4. Related Manuals ................................................................................................................................................... 14

5. Online Help ............................................................................................................................................................ 15

6. Check The Firmware Version ........................................................................................................................... 16

Safety Precautions ........................................................... 17

1. Safety Information............................................................................................................................................... 18

2. Handling Precautions ......................................................................................................................................... 19

3. Security Warning .................................................................................................................................................. 20

1. Information Security Risks ......................................................................................................................... 20

2. Security Measures – e.g. ............................................................................................................................. 20

Set the Computer Network ............................................ 21

1. Connect With a PC .............................................................................................................................................. 22

2. Set the Computer Network.............................................................................................................................. 23

1. Computer Network Setting Procedure (for Windows 10)............................................................. 23

3. Check Communication ...................................................................................................................................... 26

CONPROSYS WEB Setting ............................................... 27

1. CONPROSYS WEB Setting Outline ................................................................................................................ 28

1. Compatible Web Browser .......................................................................................................................... 28

2. Start Up CONPROSYS WEB Setting ........................................................................................................ 28

3. CONPROSYS WEB Setting Basic Operation ........................................................................................ 29

2. Menu Function List ............................................................................................................................................. 31

3. Function Details.................................................................................................................................................... 32

1. Wired LAN........................................................................................................................................................ 32

2. Wireless LAN ................................................................................................................................................... 35

3. 3G ........................................................................................................................................................................ 38

4. LTE ....................................................................................................................................................................... 41

5. Proxy .................................................................................................................................................................. 43

6. Device ................................................................................................................................................................ 44

7. Data Transfer ................................................................................................................................................... 48

8. Azure IoT Hub................................................................................................................................................. 54

9. Time .................................................................................................................................................................... 55

10. Service ............................................................................................................................................................... 57

11. Mail ..................................................................................................................................................................... 59

12. SMS ..................................................................................................................................................................... 62

— 3 —

Table of Contents

13. OPC UA.............................................................................................................................................................. 64

14. MTConnect ...................................................................................................................................................... 66

15. FTP ...................................................................................................................................................................... 67

16. PLC (Link config) ............................................................................................................................................ 70

17. PLC (CPU config)............................................................................................................................................ 74

18. PLC (DEVICE config) ..................................................................................................................................... 76

19. MQTT Connection ......................................................................................................................................... 80

20. MQTT Publish ................................................................................................................................................. 85

21. MQTT Subscribe ............................................................................................................................................ 92

22. System ............................................................................................................................................................... 97

23. Modbus Data View ....................................................................................................................................... 99

24. File View .......................................................................................................................................................... 102

25. Log .................................................................................................................................................................... 104

26. Firmware Update ......................................................................................................................................... 105

27. Configuration File ....................................................................................................................................... 106

28. User/Password .............................................................................................................................................. 107

29. Network .......................................................................................................................................................... 110

30. User's Restrictions ....................................................................................................................................... 111

31. Monitoring Edit ............................................................................................................................................ 112

32. Monitoring View .......................................................................................................................................... 113

33. Ta sk Ed it .......................................................................................................................................................... 114

34. Tag Edit ............................................................................................................................................................ 115

35. Save and Reboot ......................................................................................................................................... 116

36. Save and Shutdown ................................................................................................................................... 116

37. Save .................................................................................................................................................................. 116

38. Reboot ............................................................................................................................................................. 117

39. Shutdown ....................................................................................................................................................... 117

Easy Data Process and Control ..................................... 118

1. CONPROSYS VTC Outline ............................................................................................................................... 119

1. What You Can Do With CONPROSYS VTC ........................................................................................ 119

2. Work Area ...................................................................................................................................................... 120

3. Create Processing Tasks ............................................................................................................................ 120

4. Basic Procedure for Creating Processing Tasks ............................................................................... 121

5. Internal Variables ......................................................................................................................................... 124

2. Summary Of Available Controls ................................................................................................................... 125

3. Input/Output Module Allocation ................................................................................................................ 130

4. Sample ................................................................................................................................................................... 131

1. Sample (1) ...................................................................................................................................................... 132

2. Sample (2) ...................................................................................................................................................... 134

3. Sample (3) ...................................................................................................................................................... 137

4. Sample (4) ...................................................................................................................................................... 140

5. Sample (5) ...................................................................................................................................................... 142

6. Sample (6) ...................................................................................................................................................... 144

7. Sample (7) ...................................................................................................................................................... 148

8. Sample (8) ...................................................................................................................................................... 153

9. Sample (9) ...................................................................................................................................................... 158

10. Sample (10) ................................................................................................................................................ 161

11. Sample (11) ................................................................................................................................................ 163

— 4 —

Table of Contents

12. Sample (12) ................................................................................................................................................ 166

Monitoring Edit .............................................................. 168

1. CONPROSYS HMI Outline .............................................................................................................................. 169

1. What You Can Do With CONPROSYS HMI ........................................................................................ 169

2. HMI Editor Work Areas ............................................................................................................................. 170

3. Create a Monitoring Screen .................................................................................................................... 170

4. Basic Procedure for Creating a Monitoring Screen ....................................................................... 171

2. Summary of Available Controls.................................................................................................................... 175

3. Internal Variables Specification .................................................................................................................... 177

4. Sample ................................................................................................................................................................... 178

1. Sample of Input / Output Monitoring Screen. ................................................................................ 178

Tag Edit ........................................................................... 181

1. Overview of Tag Edit ......................................................................................................................................... 182

1. Tag Edit Page................................................................................................................................................. 182

2. TAG Export/Import ...................................................................................................................................... 186

Collecting Information From PLC ................................ 189

1. Display System Setting Page ......................................................................................................................... 190

2. PLC Link Configuration .................................................................................................................................... 193

3. PLC CPU Configuration.................................................................................................................................... 195

4. PLC Device Configuration ............................................................................................................................... 197

Transferring Measured Data to Server........................ 199

1. Data Transfer Outline ....................................................................................................................................... 200

2. Settings for Transferring Measured Data. ................................................................................................ 201

3. Data Transfer Setting ........................................................................................................................................ 202

1. Data Transfer ................................................................................................................................................. 202

2. Service ............................................................................................................................................................. 202

3. Time .................................................................................................................................................................. 203

4. Network Setting........................................................................................................................................... 204

5. Wireless LAN ................................................................................................................................................. 205

6. 3G ...................................................................................................................................................................... 207

7. LTE ..................................................................................................................................................................... 208

Using The Product As OPC UA Sever .......................... 209

1. OPC UA Client Preparation and Communication ................................................................................. 210

1. OPC UA Client Preparation...................................................................................................................... 210

2. Communication With OPC UA Client .................................................................................................. 210

2. Download OPC UA Sever Certificate .......................................................................................................... 212

3. Upload OPC UA Client Certificate ............................................................................................................... 214

— 5 —

Table of Contents

4. Client Authentication By User ID ................................................................................................................. 216

5. Communication With CNC by FANUC....................................................................................................... 217

6. OPC UA Server Specification ......................................................................................................................... 218

1. Overall Specification .................................................................................................................................. 218

2. Address Space Specification ................................................................................................................... 219

Set the Auto Send Mail ................................................. 221

1. SMTP Sever Setting........................................................................................................................................... 222

2. Mail Address Setting ........................................................................................................................................ 224

3. Send Mail Program ........................................................................................................................................... 225

Connecting to Azure IoT Hub ...................................... 226

1. Azure IoT Hub Communication Functions .............................................................................................. 227

1. Azure IoT Hub Communication Specification.................................................................................. 227

2. Azure IoT Hub Preparation ............................................................................................................................ 228

1. Create a Microsoft Azure Account ....................................................................................................... 228

2. Create an Azure IoT Hub .......................................................................................................................... 228

3. Obtain a Device Connection String...................................................................................................... 231

3. Azure IoT Hub Setting ..................................................................................................................................... 234

4. Sen d Az ur e I o T Task .......................................................................................................................................... 235

1. Sending Format ........................................................................................................................................... 235

2. Set a Task ........................................................................................................................................................ 237

3. Check Sending ............................................................................................................................................. 239

4. Check Log....................................................................................................................................................... 240

5. Check Resending File ................................................................................................................................. 240

6. Receiving Format......................................................................................................................................... 240

7. Check Receiving ........................................................................................................................................... 241

MTConnect ..................................................................... 242

1. MTConnect Outline ........................................................................................................................................... 243

1. MTConnect Overall Specification .......................................................................................................... 243

2. MTConnect DataItem Specification ..................................................................................................... 244

3. An Example Of MTConnect Client Display ........................................................................................ 245

FTP Communication ...................................................... 246

1. FTP Communication Function ...................................................................................................................... 247

2. FTP Server Settings ........................................................................................................................................... 248

3. File Sending/Receiving Program ................................................................................................................. 249

MQTT Publish And Subscribe ....................................... 251

1. MQTT Outline ...................................................................................................................................................... 252

2. Required Settings For MQTT Publish And Subscribe .......................................................................... 253

— 6 —

Table of Contents

3. MQTT Connection ............................................................................................................................................. 254

4. Examples for MQTT Publish and Subscribe............................................................................................. 256

1. Publish (1) ...................................................................................................................................................... 257

2. Publish (2) ...................................................................................................................................................... 259

3. Publish (3) ...................................................................................................................................................... 261

4. Publish (4) ...................................................................................................................................................... 263

5. Publish (5) ...................................................................................................................................................... 266

6. Publish (6) ...................................................................................................................................................... 267

7. Publish (7) ...................................................................................................................................................... 268

8. Publish (8) ...................................................................................................................................................... 270

9. Subscribe (1) ................................................................................................................................................. 271

10. Subscribe (2) ................................................................................................................................................. 273

11. Subscribe (3) ................................................................................................................................................. 275

12. Subscribe (4) ................................................................................................................................................. 276

13. Subscribe (5) ................................................................................................................................................. 277

14. Subscribe (6) ................................................................................................................................................. 279

5. Examples for MQTT Application .................................................................................................................. 280

1. Connection (1) .............................................................................................................................................. 281

2. Connection (2) .............................................................................................................................................. 282

3. Other (1).......................................................................................................................................................... 284

Set Up Troubleshooting ................................................ 285

1. If You Encounter a Problem? ......................................................................................................................... 286

1. General ............................................................................................................................................................ 286

2. Data Transfer To The Server Problems ................................................................................................ 288

3. Monitoring Screen Creation And Display Problems ..................................................................... 288

4. Processing Task Creation And Display Problems............................................................................ 288

Appendix ........................................................................ 289

1. Data Transfer Format ........................................................................................................................................ 290

2. F&eIT Protocol Specifications ....................................................................................................................... 294

1. Communications Sever Concept ........................................................................................................... 294

2. Basic Specifications .................................................................................................................................... 295

3. Control Information ................................................................................................................................... 302

3. SD Card .................................................................................................................................................................. 304

4. DIP Switch ............................................................................................................................................................. 305

5. LED........................................................................................................................................................................... 306

6. Modbus Status Information........................................................................................................................... 307

7. COM Setting ........................................................................................................................................................ 314

8. MQTT Publish And Subscribe Data Format ............................................................................................. 315

1. MQTT Publish Data Format ..................................................................................................................... 315

2. MQTT Resend File Format ....................................................................................................................... 317

3. MQTT Subscribe Data Format ................................................................................................................ 318

9. MQTT Communication Log ........................................................................................................................... 320

1. COMMUNICATION LOG ........................................................................................................................... 320

2. PUBLISH LOG ................................................................................................................................................ 321

— 7 —

Table of Contents

3. SUBSCRIBE LOG ........................................................................................................................................... 322

10. SMS Send Log ..................................................................................................................................................... 323

11. Industrial Value Conversion ........................................................................................................................... 324

Setting Example 1 : Measurement Value .................................................................................................. 324

Setting Example 2 : Current Value............................................................................................................... 326

Setting Example 3 : Connection With a Pyranometer of DC4-20mA Outputs .......................... 328

Customer Support and Inquiry .................................... 330

1. Services .................................................................................................................................................................. 331

Index ................................................................................ 332

— 8 —

Introduction

This section provides necessary information of the

product such as the product configuration and manuals

before actual use.

—

Introduction

—

M2M Gateway Series, Reference Manual (Software)

— 9 —

1. Product Outline

Add M2M Gateway series to your current facilities where devices are controlled by PLC, and data

from the devices can be collected and linked with IoT system such as Cloud service.

The controller features the capability of collecting data from several PLCs from various makers.

1. An Example Of System Composition

* Even several different device types from various makers are used, and with multiple interfaces and

communication protocols, the M2M Gateway series can collect data, monitor facilities, and

accumulate data of operations.

Brand A P

LCs

Internet

(VPN)

Cloud Data Se

rvice

Brand B PL

Cs

RS-485

Ethe

rnet

Brand C PLCs

M2M Ga teway

series

—

Introduction

—

M2M Gateway Series, Reference Manual (Software)

— 10 —

2. Gateway Series Function

Support multi-vendor

 Data can be collected from several PLCs from various models or makers including Mitsubishi and

OMRON, and even in the environment where there are several interfaces and communication

protocols.

Collect data by easy setting

 With simple configurations, data can be collected from multiple PLCs from various makers or

models.

 With easy settings, information can be sent to cloud.

Monitor PLC device memory

 The setting values and control results can be read and monitored from PLC device memory.

Remote-monitor facilities through cloud

 The setting values and control results can be collected all at once.

 Facilities in a remote location or overseas can be monitored.

 Performances of devices can be accumulated.

Collect data on-premises

 Data can be summarized easily with data collecting software for Windows PC provided free of

charge.

 Collected data can be used with Modbus/TCP communication supported SCADA

—

Introduction

—

M2M Gateway Series, Reference Manual (Software)

— 11 —

Link Up to 10 Systems and 256 Register Groups

 Connect up to 10 PLCs using an Ethernet connection or up to 128 PLCs using a serial connection.

Connect up to 256 register groups, gather up to 10000 data.

2. Manual Composition

This manual is composed as follows:

—

Introduction

—

M2M Gateway Series, Reference Manual (Software)

— 12 —

—

Introduction

—

M2M Gateway Series, Reference Manual (Software)

— 13 —

3. Procedure Until Ready To Use

The followings show the standard procedure until the product is ready to use.

Connect with a PC

Refer to

page 22

Set up the network of PC

Refer to

page 23

Set up with CONPROSYS WEB Setting

Refer

to page 28

Set Username and Password

Refer to

page 107

Save the settings

Refer to

page 115

Set up the product

Refer to Reference

Manual

(Hardware)

*This procedure can be different depending on the user's environment or system types.

—

Introduction

—

M2M Gateway Series, Reference Manual (Software)

— 14 —

4. Related Manuals

The manuals related to the product are listed below.

Read them as necessary along with this document.

 Must Read The Following Manuals.

Name

When to Read

Contents

How to Get

Product Guide

Must read this after

opening the package.

This lists the product

configuration and

describes the precautions.

Included in the package

(Printed matter)

Setup Manual

Read this when setting up

the product.

This describes the required

items for setup and

configuration procedure.

Download from

the Contec

website (PDF)

Reference Manual

(Hardware)

Read this when operating

the product.

This describes the

hardware aspects such as

functions and settings.

Download from

the Contec

website (PDF)

Reference Manual

(Software)

Read this when setting up

the “CONPROSYS WEB

Setting”.

This describes how to set

each function of

“CONPROSYS WEB

Setting”.

Download from

the Contec

website (PDF)

 Read The Following Manuals As Necessary.

Name

When to Read

Contents

How to Get

CONPROSYS Cloud Data

Service 2 (CDS2) Manual

Read this to understand

the outline of the

CONPROSYS Cloud

Data Service 2.

This describes the outline

and specification of the

CONPROSYS Cloud Data

Service 2 as well as how to

operate the product.

Download from

the Contec

website (PDF)

CONPROSYS Cloud Data

Service 2 Concise Manual

Read this when using

the CONPROSYS Cloud

Data Service 2.

This describes the procedure

to start monitoring

measured data in Cloud Data

Service 2.

Download from

the Contec

website (PDF)

 Download Manuals

Download the manuals from the following URL.

Download

https://www.contec.com/download/

—

Introduction

—

M2M Gateway Series, Reference Manual (Software)

— 15 —

5. Online Help

We offer the detailed information on “CONPROSYS VTC” for assembling processing tasks such as

calculation and control as well as on “CONPROSYS HMI” for operating and editing the monitoring

screen through the Online Help.

Consult the Online Help as necessary.

 CONPROSYS VTC (Visual Task Control).

Online Help

https://doc.conprosys.com/help/task/V1/en/

 CONPROSYS HMI (Human Machine Interface)

Online Help

https://doc.conprosys.com/help/hmi/V1/en/

—

Introduction

—

M2M Gateway Series, Reference Manual (Software)

— 16 —

6. Check The Firmware Version

Before running the product, visit our website to check the firmware version and update to the latest

one if necessary.

Updating firmware to the latest version will resolve troubles and stabilize the operation.

Download

https://www.contec.com/download/

* Refer to the “Firmware Update (page 105)” for further details.

— 17 —

Safety Precautions

Understand the following definitions and precautions to

use the product safely. Never fail to read them before

using the product.

—

Safety Precautions

—

M2M Gateway Series, Reference Manual (Software)

— 18 —

1. Safety Information

This document provides safety information using the following symbols to prevent accidents

resulting in injury or death and the destruction of equipment and resources.

Understand the meanings of these labels to operate the equipment safely.

DANGER

Signal word used to indicate an imminently hazardous situation which,

if not avoided, will result in death or serious injury.

WARNING

Signal word used to indicate a potentially hazardous situation which,

if not avoided, could result in death or serious injury.

CAUTION

Signal word used to indicate a potentially hazardous situation which,

if not avoided, could result in minor or moderate injury.

—

Safety Precautions

—

M2M Gateway Series, Reference Manual (Software)

— 19 —

2. Handling Precautions

CAUTION

 The specifications of the product are subject to change without notice for enhancement and

quality improvement. Even when using the product continuously, be sure to read the manual

in the CONTEC’s website and understand the contents.

 Do not modify the software.

CONTEC will bear no responsibility for any problems, etc., resulting from modifying the

software.

 Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that

may appear in this document or for results obtained by the user as a result of using the

software.

—

Safety Precautions

—

M2M Gateway Series, Reference Manual (Software)

— 20 —

3. Security Warning

When connecting to the network, be aware of security-related problems. See the examples of

Security measures below and set up the product properly along with the network devices.

1. Information Security Risks

 Unauthorized access from the outside through a network could cause the system halt, data

damage, or exposure to malware. *1

 Invaded and used as a stepping stone, a device might attack the others through networks. (a

victim becomes an assailant)

 Information might leak without realizing due to the connection to the network.

 Secondary damages such as harmful rumors, liability in damages, social credibility fall, and

opportunity loss are expected led by the troubles described above.

*1: Malware (Malicious Software) is software that brings harm to a computer system and performs

unintended operations.

2. Security Measures – e.g.

 Do not keep using the default password. (Refer to the product manual for the password setting).

 Set a strong password.

Combined with upper and lowercase letters, and numbers so that it cannot be easily

analogized by others.

 Change the password periodically.

 Disable unnecessary network services and functions.

 Restrict access to the network with network devices. *2

 Restrict ports to be released on the network with network devices. *2

 Create a closed network connection using such as dedicated network or VPN*3

*2: Inquire for setting procedure to manufacturers.

*3: VPN (Virtual Private Network) a secured network that wards off unauthorized access by

protecting the communication path with authentication and encryption.

Unfortunately, there are no perfect ways to avert unauthorized access or close a security hole

that are endlessly found day and night.

Please understand that risks are always involved with the Internet connection, and we strongly

recommend a user should constantly update information security measures.

Page is loading ...

Contec CPS-MG341-ADSC1-931 Reference guide

This manual is also suitable for

Contec CPS-MG341-ADSC1-931 Reference guide

Related papers

Other documents