Quadrone Pro-Cam AW-QDR-PCAM is a versatile, easy-to-use drone that is perfect for both beginners and experienced pilots alike. With its 6-axis gyroscope, it is wind resistant and can be flown both indoors and outdoors. It also comes with a variety of features that make it a great choice for photography and videography, including a 360-degree flips and a throwing take off feature.
Here are some of the key features of the Quadrone Pro-Cam AW-QDR-PCAM:
- 4-axis structure for flexible and faster flying
- Built-in 6-axis gyroscope for precise hovering
- 360-degree flips for impressive aerial maneuvers
Quadrone Pro-Cam AW-QDR-PCAM is a versatile, easy-to-use drone that is perfect for both beginners and experienced pilots alike. With its 6-axis gyroscope, it is wind resistant and can be flown both indoors and outdoors. It also comes with a variety of features that make it a great choice for photography and videography, including a 360-degree flips and a throwing take off feature.
Here are some of the key features of the Quadrone Pro-Cam AW-QDR-PCAM:
- 4-axis structure for flexible and faster flying
- Built-in 6-axis gyroscope for precise hovering
- 360-degree flips for impressive aerial maneuvers
• Four axis structure makes the quadcopter for flexible and faster for flying.
•It is wind resistant and can be flown indoor and outdoor.
• Built in 6 axis gyroscope for precise hovering in the sky.
• Simple design makes changing parts easy.
• Comes with 360 degree flips and throwing take off features.
The materials and specifications mentioned in this manual or the parts in this package are for reference only.
Key features of quadrone
INSTRUCTION MANUAL
4CH 2.4G REMOTE CONTROL QUADCOPTER
AWW INDUSTRIES™ is an innovative division of DGL Group, Ltd.
Other trademarks and trade names are those of their respective owners.
AWW INDUSTRIES,
195 Raritan Center Parkway, Edison, NJ 08837.
Specifications, colors and contents may vary from illustrations.
WARNING: This product may
contain a chemical known to
the State of California to cause
cancer, or birth defects, or
other reproductive harm.
PROP 65 WARNING
Manufactured in China.
Batch Ref: XXXX
Model Number: XXXX
Conforms to safety requirements of ASTM, FCC, & CPSIA.
WARNING:
CHOKING HAZARD-Small parts.
Not for children under 3 years.
Tested to comply with FCC standards.
FOR HOME OR OFFICE USE.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference and
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
BATTERY WARNING:
• Do no mix alkaline, standard (carbon zinc), rechargeable (nickel hydride) batteries.
• Do not mix old and new batteries.
• Non-rechargeable batteries should not be recharged.
• Rechargeable batteries should be removed from the appliance before being charged.
• Rechargeable batteries should be charged under adult supervision only.
• Exhausted batteries should be removed.
• The supply terminals should not be short-circuited.
• Only batteries of the same or equivalent type are recommended to be used.
• Batteries should be inserted with the correct polarity.
IMPORTANT INSTRUCTIONS
1. This product is precise equipment that integrates mechanics and electronics with expertise in aerodynamics and high-frequency
transmitting. It is required for the quadcopter to be correctly assembled and debugged to prevent an accident from occurring. The owner of
this product should control the quadcopter safely and carefully. Please keep in mind we are not responsible for this product being used
improperly. This may result in severe injury or loss of property and we cannot control the operating process once the user assembles or uses
this product.
2. This product is suitable for ages 14 years and up and people who have operating experience in flying a model.
3. Please fly quadcopter in open areas such as a local field and areas that allow remote control flying.
4. Once you are the owner of this product, you are responsible for your actions.
5. If there are any problems while using this product, such as operating or repairing, please reach our sales agent for details. The sales agent
will provide you with the technical support and after-sale service.
Headless Mode: Press the Headless Mode button and you will hear two beeps and enter Headless Mode. No matter what
direction the quadcopter faces, it will respond according to the direction pushed on the remote. (Forward on the remote
will make the quadcopter fly forward.) This makes flying simpler and more convenient for beginner pilots. To exit Headless
Mode, press the button and listen for a single beep to indicate you are back in Normal Mode.
One Key Return: As long as you are in controllable range, press the One Key Return button on the remote. You will hear a
single beep and the quadcopter will automatically return to the pilot. Press the button again or push the control lever to
exit One Key Return.
REMOTE CONTROLLER DIAGRAM
1. Use a screwdriver to remove screw on the back of
the transmitter, then open the battery cover (Figure 1)
2. Install 4 “AA” batteries (not included) into the back
of the transmitter then replace the battery cover and
reinstall the screw (Figure 2).
1. Install batteries with correct polarity.
2. Do not mix old and new batteries.
3. Do not mix different types of batteries.
Flip mode
Headless mode
Photo and video
One key return
Decorative
button
1. Sideways fine-tuning (Turn left/right fine-tuning in Mode 2)
2. Forward/backward fine-tuning
3. Turn left/right fine-tuning (Sideways fine-tuning in Mode 2)
4. Throttle power
5. Forward speed
6. Backwards speed
7. Right sideways speed
8. Left sideways speed
9. Left turning speed (The higher the level, the faster it will turn)
10. Right turning speed (The higher the level, the faster it will turn)
11. High/Low speed: Hold the “A” button to switch between high speed mode and low speed mode. “H” means high
speed and “L” means low speed.
12. Power indicator: Shows the remotes battery life
13. Mode indicator: Mode 1 is the default mode when powered on. To change to Mode 2, hold the “B” button, then
re-turn on the remote. The Mode on the LCD display will now be changed.
14. Signal power
Step 1: Switch the On/Off switch to ON. Step 2: Open the battery cover and insert
the battery into the power port.
Step 4: Push the throttle lever to the
highest position, then push it to its lowest.
There will be a beep from the remote,
indicating the quadcopter is in pre-flight
mode.
Step 3: Close the battery cover and turn on
the quadcopter.
Step 1: Push the On/Off switch of the
quadcopter to the OFF position and then
open the battery cover.
Step 2: Pull the battery wire out of the
power port.
Step 3: Insert the battery power port to the USB
charging cable. A light will turn on to indicate it
is charging.
GETTING READY TO FLY
CHARGING YOUR BATTERY
REMOTE CONTROL KEYPAD AND LCD SCREEN
CAUTIONS WHEN CHARGING
1. Please keep this product in a dry, ventilated area away from any heat source or explosive product.
2. Please remove the battery from the quadcopter. Only charge under the supervision of an adult.
3. After flying, do not charge the battery until the battery has cooled down in order to avoid a swollen battery and
a fire hazard.
4. Please use the provided USB charging cable to avoid damaging the battery.
5. When not used for a long time, a battery can lose its charge. Avoid charging too often to maximize battery life.
1. Install the landing skids to the bottom of the quadcopter, then lock screws (Figure 1).
2. Install the blade protecting frame to every corner, then lock screws (Figure 2).
The remote features two built in modes, Mode 1 and
Mode 2. To change modes, flip the “B” button and
then restart the remote.
Operation Instructions
Push the throttle up or down to make the
quadcopter fly up or down
Push the direction lever up or down to make the
quadcopter fly forward or backward.
Push the throttle left or right to make the
quadcopter turn left or right.
Push the direction lever left or right to make the
quadcopter fly to the left side or the right side.
Charging time:90-100 minutes, Playing time 5.5-6.5 minutes
INSTALLING LANDING SKIDS AND PROTECTIVE FRAMES
CONTROLLER MODES
Sideward flying
Forward and backward
Turn left and right
Hover up and down
Operation Instructions
Push the throttle up or down to make the
quadcopter fly up or down
When the quadcopter unintentionally flies
forward/backward, press the fine tuning
button up or down until the problem is
corrected.
When the quadcopter unintentionally flies to
the left/right side, press the fine tuning
button left or right until the problem is
corrected.
When the quadcopter unintentionally turns
to the left/right side, press the fine tuning
button left or right until the problem is
corrected.
When the quadcopter unintentionally flies
forward/backward, press the fine tuning
button up or down until the problem is
corrected.
When the quadcopter unintentionally flies to
the left/right side, press the fine tuning
button left or right until the problem is
corrected.
When the quadcopter unintentionally turns
to the left/right side, press the fine tuning
button left or right until the problem is
corrected.
Push the direction lever up or down to make the
quadcopter fly forward or backward.
Push the throttle left or right to make the
quadcopter turn left or right.
Push the direction lever left or right to make the
quadcopter fly to the left side or the right side.
Fine Tune Trimming
Fine Tune Trimming
Sideward flying
Forward and backward
Turn left and right
Hover up and down
Forward/backward fine-tuning Sideward fine-tuning Turn left/right fine-tuning
Forward/backward fine-tuning Sideward fine-tuning Turn left/right fine-tuning
The materials and specifications mentioned in this manual or the parts in this package are for reference only.
Low-Voltage Protection:
When the quadcopter battery is low, the power supply to the rotors will stop automatically
Power Surge Protection:
When the quadcopter rotating blades becomes jammed, the control system will stop supplying power to the rotors
automatically. Please then rematch the signal to fly again.
Restart function:
In case of flight disorder, restore remote to the factory default settings using the following method.
When the quadcopter’s lights
go from flashing quickly to
flashing slowly, push the
throttle lever to its highest
position, then pull it back to its
lowest. The quadcopter’s lights
should then change from
flashing to staying on.
Place the quadcopter on a flat surface and push both
the remotes left and right levers to the lowest right
corner and hold for 2-3 seconds. The lights on the
quadcopter will change from normal to flashing
quickly. After the 2-3 seconds, when the lights change
back to normal, it means the quadcopter has
successfully been reset.
Press the power switch to turn
the remote on.
Press the power switch to turn
the quadcopter on.
Throwing Take Off Feature
Thanks to a 6 axis gyroscope, you can throw your quadcopter and
push up the throttle and it will automatically level out and hover
smoothly even though it is tumbling through the air.
Once you’re familiar with basic flying, you can try some awesome and exciting tricks and
stunts! First, fly the quadcopter to a height of about 10 feet, then press the 360 flip switch
on the back right side of the remote. Now push the right lever in any direction and make it
do a 360 flip!
Flips
INTRODUCTION TO QUADCOPTER FUNCTIONS
LED state light
Shooting Pictures and Video
1. Insert the SD card into the back of the camera, then attach the camera to the Quadcopter as shown in the
picture below. Insert the camera's plug into its port on the bottom of the Quadrone.
2. Press the Photo button on the remote controller. The red light will flash once, indicating it is taking a picture.
By pressing the Video button, the red light will stay constant, meaning the camera is filming video. Press the
Video button again to stop recording. The red light will turn off, indicating the recording is finished.
3. Softly press the SD card to eject it from the camera. Insert it into a card reader and plug it into a computer to
see your pictures and videos!
Tips:
1. Press the Video button again to save the video after
you are done shooting.
2. An AVI format should be compatible to view on
video playing software.
3. The red indicator light will flash rapidly when the SD
card is not inserted correctly, or the memory is full.
1. Install batteries with correct polarity.
2. Do not mix old and new batteries.
3. Do not mix different types of batteries.
All the spare parts below can be bought from a local distributor.
1. The quadcopter battery power is low or dead.
2. The Transmitter battery is low or dead.
3. The transmitter band does not correspond to the
decoding of the quadcopter.
No response from
quadcopter
Quadcopter is
slow to fly or
difficult to
maneuver
1. Insufficient power with the transmitter.
2. Transmitter with the same frequency is being used
nearby.
1. Charge the quadcopter.
2. Charge or replace the batteries if required.
3. Adjust the band on the transmitter and keep it the
same as the quadcopter.
1. Replace the battery.
2. Use the quadcopter out of the range of other RC
quadcopters.
TROUBLESHOOTING
SPARE PARTS
Body cover
Motor holder Lampshades Motor A/B Light boards
Receiver board
Transmitter
Battery charging cable Camera
Main blades Protecting frames Landing skids
12.5” 12.5”
12.5”
3”
BREAKDOWN & DIAGRAM
MAIN SPECS
03
05
04
06
07
09
08
15
04
03
01
08
07
12
02
13
11
14
16
17
Body length: 12.5”
Body width: 12.5”
Body height: 3”
Main motor code: 7
Battery: 3.7V 500mAh Li-poly
Upper Body
Lower Body
Rotating Blade
Reversing Blade
Protecting Frames
Battery Cover
Rotating Motor
Code Code CodeQuantity QuantityQuantityDescription Description Description
Gear
Landing Skids
Camera
4
2
1
15
16
17
Reverse Motor
Motor Holder
Lampshades
Light Boards
Receiver Board
Battery
Battery Cover
2
4
4
4
1
1
1
08
09
10
11
12
13
14
1
1
2
2
4
4
2
01
02
03
04
05
06
07
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Quadrone Pro-Cam AW-QDR-PCAM is a versatile, easy-to-use drone that is perfect for both beginners and experienced pilots alike. With its 6-axis gyroscope, it is wind resistant and can be flown both indoors and outdoors. It also comes with a variety of features that make it a great choice for photography and videography, including a 360-degree flips and a throwing take off feature.
Here are some of the key features of the Quadrone Pro-Cam AW-QDR-PCAM:
- 4-axis structure for flexible and faster flying
- Built-in 6-axis gyroscope for precise hovering
- 360-degree flips for impressive aerial maneuvers
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
