SCOTT DRX 600 Owner's manual

DRX600

RDS CAR RADIO DVD/MP4/XVID/VCD CD/MP3/USB PLAYER

AM/FM STEREO

RDS FUNCTION(AF/TP/TA/PTY)

30 STATION MEMORY

MOTORIZED INDASH MONITOR

MUSIC POWER 160 WATTS

USER MANUAL AND INSTALLATION INSTRUCTIONS

CONTENTS

1. ACCESSORIES………………………………………………..……………………………………………………………… GB-2

2. SAFETY PRECAUTIONS………………………………………………………………………………………………………GB-3

3. INSTALLATION…………………………………………………………………………………………………………………GB-5

4.WIRING CONNECTION……………………………………………………………………………………………………… GB-9

5.MAINTENANCE………………………………………………………………………………………………………………… GB-11

6. DESCRIPTION OF FUNCTIONS………………………………………………………………………………………………GB-12

7. REMOTE CONTROL……………………………………………………………………………………………………………GB-13

8. COMMON OPERATIONS………………………………………………………………………………………………………GB-14

9. TUNER…………………………………………………………………………………………………………………………….GB-17

10. VCD/CD/MP3/MPEG-4/USB………………………………………………………………………………………………… GB-23

11. DVD…..………………………………………………………………………………………………………………………..… GB-29

12. MAIN MENU…………………………………………………………………………………………………………………….GB-39

13. SPECIFICATIONS………………………………………………………………………………………………………………GB-46

14. SIMPLE TROUBLESHOOTING GUIDE……………………………………………………………………………………..GB-48

GB-1

1. ACCESSORIES

M 5 x 5

4 Screws

Harness Rubber x1 Rear Mounting Bolt x1

Steel Bar x 1 ISO Wire connector Keys x 2

Remote Control x 1

Outer Trim Frame x 1

Mounting Sleeve x1

Removable control User manual x 1 USB cable x 1

GB-2

2. SAFETY PRECAUTIONS

1. Be sure to connect the color-coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or

damage the vehicle’s electrical system.

2. Be sure to connect the speaker leads to the speaker terminal using the correct polarity. Never connect the left and right channel

speaker cables to each other or to a metal part of the vehicle.

3. Make sure all the connections are correct before turning on your unit.

4. When replacing the fuse(s), the replacement must be of the same amperage as shown on the fuse holder.

5. Do not block vents or radiator panels. Blocking them will cause heat to build up inside and may result in fire.

6. Do not use the unit for too long after the car has stopped in order to avoid using up the electric energy of the car battery.

7. Keep the unit away from direct sunlight.

8. Do not expose the unit to extreme temperatures, and avoid humidity and direct sunlight. Ensure that that the temperature inside

the vehicle is between –10°C and +60°C.

9. Be careful of the unit’s magnetic field. Do no put the credit cards, cassettes or watches around the unit, or they may break or lose

some information.

10. In order to avoid interference, stay away from the unit when using a mobile phone.

11. Do not expose the remote control to high temperatures or direct sunlight as this may cause it to malfunction.

GB-3

About this manual

This unit features a number of sophisticated functions ensuring superior operation. All the functions have been designed for the easiest

possible use, but many are not self-explanatory. This manual will help you understand the functions and operations of the unit. This manual

mainly explains remote control operation. However, in addition to those functions related to DVD/VCD/CD/MP3/MP4 operation that can

only be operated by the remote control, there are also functions that can be operated by the buttons on the main unit.

PRECAUTIONS

This unit can play the following discs and formats only:

Type of disc Label on the disc

Recorded material

Size of disc

DVD

Sound and Video

12cm

VCD

Sound and Video

12 cm

CD

Sound only

12 cm

MP3

Sound only

12 cm

MP4

Sound and Video

12 cm

NOTE: The unit is compatible with VCD1.0/2.0/3.0 version and DVD disc.

GB-4

MPEG-4

- Do not place stickers on your CDs or write on them.

- Handle the disc by its edge to keep the disc clean, and do not

touch the surface.

- Do not use CDs with labels or stickers attached, which may leave

a sticky residue when they begin to peel off. (As shown in the

picture)

Clean the discs with a cleaning cloth. Wipe each disc from the

center outwards. (As shown in the picture)

Note:

* Besides playing the discs above, the unit also can use other sources.

3.INSTALLATION

Installation of the front panel

Put notch A (shown in the picture) onto shaft B at right side. And then press the front panel to right in order to put the notch onto the shaft at

left side. Then push the front panel upwards until it clicks to the main unit.

GB-5

REL

Note:

Never put any objects between the main unit and the front panel

DETACHING THE FRONT PANEL

Press

RELEASE button in the upper right hand corner, and then the front panel will be folded down.

When the front panel is turned down to a position of 90 °, hold and slide the front panel to right, and then pull it out.

INSTALLATION OF THE UNIT

Take Out Screws Before Installation

Before install the unit, must remove the two screws with label “WARNING”.

Installation Method : DIN Front-Mount

Precautions

• Choose the location of the unit carefully so that the unit does not hinder the normal functioning of the vehicle.

• Before installing the unit, make sure that the front panel can move freely and can be easily removed.

• Do not install the unit in a location where it could be exposed to high temperatures, to direct sunlight, to hot air from the

heating system, to dust, dirt or excessive vibrations.

• For successful installation, only use equipment intended for this purpose.

• Be sure to remove the front panel before installing the unit.

• In order to avoid certain problems relating to disc playback, the unit must be installed at an angle of less than 30°.

GB-6

Fire wall

To support the uni

t

Bend these claws

outward for a tight

fit, if necessary.

After inserting the mounting bracket in the dashboard (1), select the appropriate claws according to the width of the dashboard and bend the

claws outward in order to keep the rack as shown in the diagram (2). Plug in the connectors (please see page 10) and insert the car radio into the rack.

Put the outer trim frame as shown in the diagram (4). If necessary, use the metal assembly bar, rear mounting bolt with its screw guider.

GB-7

Removing the Unit

Detach the front panel before removing the unit. For more details, refer to

“DETACHING THE FRONT PANEL”.

1.Take out the Outer Trim Frame after detaching the front panel.

2. Insert the keys supplied into the unit at both sides of the unit (shown as illustrated) until they click.

Pulling the keys makes it possible to remove the unit from the dashboard.

Cleaning the Connector

If the connector is dirty, it may result in the unit not working properly. To avoid such problem happening, please detach the front

panel, and clean the connector with an alcohol swab. Gently clean the connector and avoid damaging it.

The main unit

The backside of the front panel

Notes

•

For security reasons, always shut down the engine and remove the key from the ignition before cleaning.

•

Never let your finger or any metal device touch the connector directly.

GB-8

4.Wiring Connection

Note:

* The brown wire is connected to the handbrake signal; for safety, the

programs

and MP3 navigation menu can be seen on the monitor after the

handbrake is activated,

but the menu and RCA output do not have this

constraint.

* If you do not want to use this function, connect it to the negative pole.

L white

R red

L white

R red

L white

R red

Antenna

Audio Out Front

(Dark Grey)

Black

Audio Out Front

Output Socket (Female)

Video Out

Grey

Yellow

Video In

Subwoofer Out

Black

Yellow

Audio Out Rear

Output Plug (Male)

Audio Out Rear

(Light Grey)

Brown

Antenna Receptacle

Subwoofer

AUX In

Black

Video Out

Video In

AUX In

Grey

Grey/Black

Violet

Violet/Black

Blue

Brown

Front R

Speaker

Rear R

Speaker

To power

Antenna

Braking Signal

Ignition Key

Memory Back-up12V

Negative Ground

Rear L

Speaker

Front L

Speaker

Red

Yellow

Choke

GB-9

Box

White/Black

White

Black

Green/Black

Green

Many vehicles are pre-fitted with ISO connectors behind the dashboard, including all the electrical cabling for a car radio. In such cases, the

connections fitted to the vehicle can be directly plugged into the car radio connectors. Should your car not be pre-fitted with these connectors,

we strongly advise you to obtain the ISO wiring loom fitted with the male connector for connection to your car radio either from a specialist

shop or from the car dealer for your vehicle. Once obtained, you will only need to connect your loudspeakers and the power supply to the ISO

connector, following the connection instructions below.

Power Supply Connector

1.Battery (yellow)

Speaker Connector

Power Supply Connector

5. Speaker Connector 10.Front left speaker + (white)

6.Rear right speaker + (violet) 11.Front left speaker – (white/black)

2.Ground (black) 7.Rear right speaker - (violet/black) 12.Rear left speaker + (green)

3.Power +12 volt (red) 8.Front right speaker + (grey)

13.Rear left speaker – (green/black)

4. Electrical Antenna (blue)

9.Front right speaker – (grey/black)

1) Make sure your car battery is a 12 volt (6 filter caps) negative ground system (if not, a converter will be necessary).

2) Before starting wiring connections, disconnect the power supply by removing the fuse from the fuse holder.

3) Connect the power wire to one of the extra terminal of the car.

4) Connect the black ground wire to a metal part of the car. It is important to make good contact.

5) Make other wiring connections as shown.

6) Connect the battery of the car.

7) Replace the fuse holder of the unit.

NOTE IN CORRECT WIRING OR OPERATION WILL VOID THE WARRANTY OF THIS UNIT.

GB-10

Replacing the Fuse

Make sure the amperage matches the specified value when replacing the fuses. If the fuse is blown, check the power connection and replace

with a new one. If the same problem occurs, there must be a malfunction. In such cases, please consult the nearest repairs center.

Warning:

Never use the fuse with a rated amperage over the one specified, otherwise you risk damaging the unit.

Replacing the Battery

When the operation range of the remote control becomes short or if it no longer works, replace the lithium battery with a new button cell

(CR2025). Make sure the battery polarities match before replacing it.

Gently pull out the battery holder

whilst pressing the side

Put the button-type battery with

The + facing upward into the

battery holder.

Insert the battery holder into the

remote control.

Warning:

Improper handling of the battery may

lead to explosion. Do not charge,

disassemble or throw the battery into

a fire.

Precautions on Using Lithium Batteries

Always keep the lithium battery out of the reach of children. If it is swallowed, see a doctor immediately. In order to ensure optimum

performance, clean the battery with a dry cloth.

Make sure that the polarities are correct when loading the battery. To prevent short circuits, do not use metal tweezers to insert the battery.

GB-11

5. Maintenance

⑹ AMS(RPT) button

During radio mode, briefly press it and use  / buttons to select the preset

station number to save current frequency; press and hold it to memorize stations

automatically.

During playback, press it to activate the repeat play function.

⑺ Remote Infrared Sensor

⑻ BND/

button

During radio mode, press it to select different bands.

During playback, press it to pause or resume playback.

⑼ MOD/MUT button

Briefly press it to select the mode: RADIO , DVD, AUX IN; Hold and press it to

mute the sound output.

⑽ RESET button

Press to reset the unit to default settings.

⑾ EQ/AF button

⑴ PWR button

Briefly press it to select the alternative frequency; press and hold it to select the EQ

preset mode: POP, CLASSIC and ROCK.

Press PWR to turn on the unit, press it again to go to standby mode.

⑵ RELEASE button

⑿  / button

Press to do manual tuning or go to next/ previous track/ chapter.

Press it to release the front panel.

⒀

EJECT button

⑶ MENU-VOL button

Press it to eject the disc.

Rotate clockwise to increase the volume level; and rotate

⒁ LOC button

During radio mode, press it to select the distant or local station.

anticlockwise to decrease the volume level. Press it repeatedly to set the sound effects;

press and hold it to show the system menu; rotate it to set the item and then press to

enter.

⒂ LOU/TA button

Briefly press it to activate the traffic alarm function; press and hold it to activate the

loudness function

⑷ LCD (LIQUID CRYSTAL DISPLAY)

⒃ Disc Loading Slot

To display current status and also used to view movies.

⑸ USB Port

GB-12

6. Description of functions

7 ANGLE (play angle/ PTY)

8 OSD (On Screen Display)

9 ZOOM (briefly press it to zoom in or out/ hold and press it to adjust the

screen ratio: normal/ wide)

10 (slow forward/ backward)

11 P/N (system adjustment)

12 (mute)

13 PROG (program play)

14 VOL+/VOL-/SEL (volume control/sound effects)

15 RPT (repeat play)

16 RDM (play at random)

17 (Play/pause)

18 (Stop play)

19 SETUP

20 (F.REW/F.F)

21 (Previous/next track/chapter)

22 CLEAR

23 Number buttons (0~9)

24 SOURCE (mode selection)

25 TA/LOUD (traffic alarm/ loudness)

26 AF/EQ (alternative frequency/equalizer)

27 (Left/Right/Up/Down ENTER)

28 DSP button Under the video mode, press it to hide the OSD character on

the screen, to avoid interrupting watching the video. After hiding the OSD

character, if there are other characters displayed (for example: volume), it will

hides automatically after 8 seconds.

1 PWR (on/standby)

2 GOTO (playing time/track)

3 BAND/TITLE (band selection/ title menu)

4 AMS/MENU (preset stations, automatic memorization of stations/menu)

5 LOC/SUB-T (distant or local station selection/subtitle display)

6 ST/AUDIO (stereo or mono /language, audio channel selection)

GB-13

7. Remote Control

1. Reset the Unit

When operating the unit for the first time or after replacing the car battery, you must reset it.

Press the RESET button (10) on the main unit with a pointed object, (such as a ballpoint pen) to reset it.

Note:

* When errors occur on the display, you can press RESET button to resolve the problem, The clock setting and any memorized functions will be erased.

* Only the RESET button on the main unit can be used to reset the unit.

2. Turning the Unit On/Standby

Press the PWR button (1) on the remote control to turn on the unit at last mode. When the unit is on and a disc or USB device is inserted,

it will automatically switch to this mode and start playback. Press it again to go to standby mode.

Note:

* Pressing the PWR button on the main unit will perform the same function.

3. Volume Control

Press the VOL+ button (14) on the remote control to increase the sound level and press the VOL- button (14) to lower the sound level.

Note:

* The volume can also be adjusted by rotating the VOL+/- button (3) on the main unit.

GB-14

8. Common Operations

4. Setting the Sound

Repeatedly press the SEL button (14) to select the desired mode, in the following order:

After selecting the desired mode, use the VOL buttons (14) on the remote control adjust the settings.

VOL BAL FAD

TRE BAS

Note:

• The VOL+/- button (3) can also be used to adjust the volume, balance, fader, bass and treble of the main unit.

5. Selehttp://lady.qq.com/a/20071011/000003.htm EQ Setting

While listening to pop, classic or rock music, you can select the corresponding preset modes to adjust the sound quality by using EQ

button (26).

Press and hold the EQ button (26) to choose the following modes in turn:

Note:

* The EQ button (11) on the main unit also can perform the same function.

POP CLASSIC

EQ OFF ROCK

6. Turning Loudness On/Off

Hold down the LOUD button (25) on the remote control to activate the loudness function. You can press this button to increase the low

frequency, which can improve sensitivity for your ears. Keep pressing it again to switch off this function.

Note:

* The LOUD button (15) on the main unit also can perform the same function.

GB-15

7. Mute Function

Press the MUTE button (12) to shut off the sound output. The button appears on the LCD. Press it again to resume

previous volume level.

Note:

* Press and hold MUT (9) on the main unit also performs the same function.

8. Clear

If you make a mistake when entering your selection, press the CLEAR button (22) on the remote control to clear it.

Note:

* This function can only be carried out with the remote control.

9. Mode Selector

Repeatedly press the SOURCE button (24) on the remote control to select the different modes available.

Note:

* Briefly pressing the MOD (9) button on the main unit performs the same function.

10. Display Mode

During video playback, press and hold ZOOM button (9) on the remote control to select the display mode: NORMAL (4:3)

and WIDE (16:9), press and hold it again to switch back the previous display mode.

11. Remote Infrared Sensor:

The remote infrared sensor (7) on the main unit receives the remote control signal.

GB-16

12. AUX In

You can input the external source into the main unit through AUX IN plugs at the back of the unit.

13. Eject a Disc Compulsively

During playback, if a disc cannot be played normally or cannot eject, close the front panel and briefly press the SOURCE button to

switch to radio mode. Then press RELEASE button (2) to release the front panel, hold down the EJECT button (13) on the main unit

for 3 seconds and the disc will be forced to eject.

1. Band Selector

In radio mode, repeatedly press the BAND button (3) to select bands in the following order:

Note:

* The BND buttons on the main unit (8) perform the same function.

FM1 FM2 FM3

MW2 (AM) MW1 (AM)

GB-17

9. Tuner

2. Manual/Automatic Tuning

Manual Tuning: Briefly press the  or  button (20) on the remote control continuously to increase or decrease the frequency and

search for a station. Automatic Tuning: Press and hold down the  or  button (20) for more than 3 seconds to automatically search

for lower or higher frequencies.

Note:

* The

buttons on the main unit (12) perform the same function.

3. DX/LOC Selector

In radio mode, press the LOC button (5) on the remote control to select the reception of local stations.“LO” appears on the display

and only local stations are available. Press this button again to switch off this function. ”DX” appears and both distant and local

stations can be received.

Note:

* The function can only be carried out with the remote control.

* The function is invalid in AM tuning.

* The default mode is DX mode.

4. Selecting the Stored Station

In radio mode, press the

 or  button (27) to select the next or previous stored station.

Note:

* The function can only be carried out with the remote control.

5. MONO/STEREO Selector

In radio FM mode, press the ST button (6) on the remote control to select MONO or STEREO mode. When mono mode is selected,

the letters “MO” appear. It is switched to stereo mode when “MO” disappears.

Note:

* This function can only be carried out with the remote control.

GB-18

6. Scanning/Memorizing Stations Automatically

In radio mode, press the AMS button (4) on the remote control to listen to each station that is stored in the memory for 5 seconds.

Press the corresponding number buttons or the AMS button when you hear the desired station. The radio will stop the scan at this

station. (Note: The AMS button (6) on the main unit has different function, refer to section (4) Descriptions of functions item (6).)

Press and hold down the AMS button (4) for more than 2 seconds to activate the automatic memory storing function. The radio

automatically selects a station stored under the 6 preset numbers (number buttons 1 to 6).

Note:

* The unit can memorize up to 6 stations for each band.

7. Using the Number Buttons

In radio mode, use the number buttons to select the stored stations.

The number Buttons (from 1 to 6) can help you store your favorite station. Follow the steps below:

1. When listening to a station, press and hold any one of the Number buttons (23) until“P.CH X” appears in the LCD, which indicates that station is already

stored in the corresponding number button “X”.

2. You can store up to 18 FM stations (6 each for FM1, FM2, FM3),up to 12AM stations (6 each for MW1 and MW2).

Note:

* This function can only be carried out with the remote control.

8. On Screen Display

In radio mode, briefly press OSD button (8) on the remote control to show the RDS setup, press and hold it to display the edition

information.

Note:

* This function can only be carried out with the remote control.

9. Selecting Station Directly By Frequency Key-In

Press GOTO button (2) on the remote control, the display shows: “FR:”, input the frequency value to receive the station directly.

All the digits must be input. For example, in FM mode, five digits (e.g. 100.00) must be input or it (e.g. 100.0) does not work.