Brother LT-26CL Datasheet

Type
Datasheet

Brother LT-26CL is a lower tray unit that expands the paper capacity of your printer. It can hold up to 250 sheets of plain paper, allowing for uninterrupted printing of large documents or multiple copies. The LT-26CL seamlessly integrates with your printer, providing a stable and reliable paper feed. Utilize the unit's adjustable Anchor Feet to ensure proper leveling and prevent paper jams. Remember to avoid loading Transparencies, Labels, and Envelopes into the cassette of the LT-26CL to prevent any issues.

Brother LT-26CL is a lower tray unit that expands the paper capacity of your printer. It can hold up to 250 sheets of plain paper, allowing for uninterrupted printing of large documents or multiple copies. The LT-26CL seamlessly integrates with your printer, providing a stable and reliable paper feed. Utilize the unit's adjustable Anchor Feet to ensure proper leveling and prevent paper jams. Remember to avoid loading Transparencies, Labels, and Envelopes into the cassette of the LT-26CL to prevent any issues.

HOW TO INSTALL THE LOWER TRAY UNIT (LT-26CL)
1
H
H
H
O
O
O
W
W
W
T
T
T
O
O
O
I
I
I
N
N
N
S
S
S
T
T
T
A
A
A
L
L
L
L
L
L
T
T
T
H
H
H
E
E
E
L
L
L
O
O
O
W
W
W
E
E
E
R
R
R
T
T
T
R
R
R
A
A
A
Y
Y
Y
U
U
U
N
N
N
I
I
I
T
T
T
(
(
(
L
L
L
T
T
T
-
-
-
2
2
2
6
6
6
C
C
C
L
L
L
)
)
)
!
Warning
This printer is heavy and weighs approximately 39kg (86 lbs). To avoid
injury when moving or lifting this printer, be sure to use at least two
people.
When you lift the printer be sure to use the handholds located at the
bottom four corners of the printer.
!
Caution
When moving or lifting this printer, be sure to keep the printer flat. To avoid
spills, you must first remove the Toner Cartridges, Waste Toner Pack, Oil
Bottle and Fusing Unit.
1.
Turn the printer off and unplug the power cord from the AC outlet.
2.
Place the Lower Tray Unit on a flat
table, and then remove the protective
parts.
Fig. 1
HOW TO INSTALL THE LOWER TRAY UNIT (LT-26CL)
2
3.
Pull out the Paper Cassette from the
Lower Tray Unit, and then remove
the tapes and the protective parts
inside of the Cassette.
Install the Paper Cassette into the
Lower Tray Unit.
Fig. 2
4.
Pull out the connection cable located
at the left rear side of the Lower Tray
Unit.
Fig. 3
5.
Check the two alignment pins on the
Lower Tray Unit. Use two people to
lift the printer and place it onto the
Lower Tray Unit. Be sure to use the
handholds located at the bottom four
corners of the printer. Check to
ensure that the pins are correctly
aligned into the printer.
Fig. 4
HOW TO INSTALL THE LOWER TRAY UNIT (LT-26CL)
3
6.
Remove the connector cover from
the base cover at the left side of the
printer.
Fig. 5
7.
Loosen the locking clip thumbscrew
on the left side of the Lower Tray Unit
by rotating it counterclockwise.
Rotate the locking clip and hook it
onto the printer so that it hangs
down, and then secure it with the
thumbscrew.
Fig. 6
8.
Insert the connection cable into
the printer’s connector.
Fig. 7
HOW TO INSTALL THE LOWER TRAY UNIT (LT-26CL)
4
9.
Pull out the Upper Paper
Cassette, and then connect the
Lower Tray Unit with the printer
by sliding the locking clip to the
right on the top surface of the
Lower Tray Unit.
Fig. 8
10.
Install the right hand side cover
into the right side of the Lower
Tray Unit by first fitting the hook
at the front.
Install the left hand side cover by
fitting the hole at the rear side of
the side cover to the shaft of the
Lower Tray Unit. Close the side
cover by fitting the notch to the
hook of the Lower Tray Unit.
Fig. 9
11.
To level the tray unit, adjust the
Anchor Feet located at the front
and rear on the right hand side at
the bottom of the Lower Tray
Unit. The Anchor Foot moves up
and down as it is turned. It is
correctly adjusted when the
Anchor Foot touches the work
surface and the tray unit is level.
Turn the lock screw to secure the
Anchor Foot.
Fig. 10
Note
Do not load Transparencies, Labels and Envelopes in the cassette
installed into the optional Lower Tray Unit. It may cause paper jams.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Brother LT-26CL Datasheet

Type
Datasheet

Brother LT-26CL is a lower tray unit that expands the paper capacity of your printer. It can hold up to 250 sheets of plain paper, allowing for uninterrupted printing of large documents or multiple copies. The LT-26CL seamlessly integrates with your printer, providing a stable and reliable paper feed. Utilize the unit's adjustable Anchor Feet to ensure proper leveling and prevent paper jams. Remember to avoid loading Transparencies, Labels, and Envelopes into the cassette of the LT-26CL to prevent any issues.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI