Gas CooktopEN
I n n e r c a p
O u t e r c a p
B u r n e r c r o w n
C a s t t r i v e t
O u t e r c a p
I n n e r c a p
B u r n e r c r o w n
C a s t t r i v e t
B u r n e r c a p
S e m i - r a p i d b u r n e r c r o w n
S m a l l c a s t t r i v e t
K n o b
B u r n e r b o x
T e m p e r e d g l a s s t o p p l a t e
E G T 7 8 3 6 C K P / E G T 9 2 3 6 C K P
I n n e r c a p
O u t e r c a p
B u r n e r c r o w n
W i r e t r i v e t
O u t e r c a p
I n n e r c a p
B u r n e r c r o w n
W i r e t r i v e t
B u r n e r c a p
S e m i - r a p i d b u r n e r c r o w n
S m a l l w i r e t r i v e t
K n o b
B u r n e r b o x
T e m p e r e d g l a s s t o p p l a t e
E G T 7 8 3 6 E G P
E G T 7 8 2 6 C K P
I n n e r c a p
O u t e r c a p
B u r n e r c r o w n
C a s t t r i v e t
B u r n e r b o x
K n o b
B u r n e r c r o w n
I n n e r c a p
O u t e r c a p
C a s t t r i v e t
T e m p e r e d g l a s s t o p p l a t e
The Class of the appliance: Class 3
These instructions are only valid if the country symbol appears on the appliance.
If the symbol does not appear on the appliance, it is necessary to refer to the technical instructions which will provide
the necessary instructions concerning modification of the appliance to the conditions of use of the country.
Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure) and the
adjustment of the appliance are compatible
The adjustment conditions for this appliance are stated on the label (or data plate).
This appliance is not connected to a combustion products evacuation device. It shall be installed and connected in
accordance with current installation regulations.
Particular attention shall be given to the relevant requirements regarding ventilation.
Avoid using of cooking vessels on the hotplate that overlap its edges.
The use of inappropriate hob guards can cause accidents.
Hob guards cannot be used.
The use of a gas cooking appliance results in the production of heat, moisture and products of combustion in the
room in which it is installed.
Ensure that the kitchen is well ventilated, especially when the appliance is in use: keep natural ventilation holes open
or install a mechanical ventilation device (mechanical extractor hood).
Prolonged intensive use of the appliance may call for additional ventilation, for example opening of a window, or more
effective ventilation, for example increasing the level of mechanical ventilation where present.
CAUTION: “In case of hotplate glass breakage:
_ shut immediately off all burners and any electrical heating element and isolate
the appliance from the power supply.
_ do not touch the appliance surface,
_ do not use the appliance.”
USE ONLY LOW PRESSURE REGULATOR
MAX 30mbar FOR THIS APPLIANCE
4 3
711
425
37.54-R
Gas inlet position
MODEL:EGT7826CKP/EGT7836CKP/EGT7836EGP
232.5
832
470
293
8 5
37.54-R
Gas inlet position
MODEL:EGT9236CKP
injector hole
I n j e c t o r hole o u t e r
I n j e c t o r h o l e i n n e r
F i g 1 4
I n n e r c a p
O u t e r c a p
B u r n e r c r o w n
F i g 1 3
(Fig 13,14)
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
