AGPtek Pulse Oximeter Owner's manual

Type
Owner's manual

This manual is also suitable for

AGPtek Pulse Oximeter is a non-invasive device intended for spot-checking of oxygen saturation of arterial hemoglobin (SpO2) and pulse rate. It is suitable for use in home and healthcare environments. The device allows users to monitor their blood oxygen saturation and pulse rate quickly and easily. It features an easy-to-read display, adjustable brightness, and is lightweight and portable for convenient use.

AGPtek Pulse Oximeter is a non-invasive device intended for spot-checking of oxygen saturation of arterial hemoglobin (SpO2) and pulse rate. It is suitable for use in home and healthcare environments. The device allows users to monitor their blood oxygen saturation and pulse rate quickly and easily. It features an easy-to-read display, adjustable brightness, and is lightweight and portable for convenient use.

EN>DE>FR>IT>ES>NL
01 - 09
10 - 19
20 - 30
31 - 40
41 - 50
51 - 60
English
Deutsch
Français
Italiano
Español
Nederland
Content
1.Introduction
........................................
1
2.How to Use Properly
.........................
2
3.Customize Settings
...........................
3
4.Important Notice
...............................
7
5.Safety Instructions
.............................
7
6.Procuct Classification
........................
7
7.Maintenance & Preservation
..........
7
8.Product Declaration
..........................
7
9.Problems & Solutions
.......................
7
10.Contact Us
........................................
9
NOTE: For the information of Part 5. 6.
7. 8. 9, please read detailed User
Manual
Introduction
Pulse Oximeters are considered
a suitable alternative, though by
no means equal to, blood gas
testing. It can be applied for
Fitness Monitoring and High
Altitude Sports. If you want to
use for disease surveillance such
as COPD Management, Asthma
Patient Care and Piece of Mind
for Pulmonary Patients, please
consult your doctor.
1
How to Use Properly
1. Press the bottom to open the
Power
Indication
Pulse
Rate
Value
SpO2
Value
Pulse
Bar Graph
Power
Button/
Setting
2
probe.
2. Insert the finger.
3. Press button to activate
the oximeter. You will need to
wait for 5 more seconds for the
pulse oximeter to stabilize its
readings.
Customize Settings
Non-professionals are advised
not to customize the settings
and use the default mode.
After power on, long press
button ( 2s) for entering
3
parameter setting interface.
And short press the button
( 1s) for selecting parameter.
Then, just wait for the
parameter to stabilize and
confirm.
Long press button (2s).
It will enter parameter setting
interface. As the display as
Pic.1: You can select the SpO2
parameter from 85 to 99 for
warning.
Then, continue to long press
4
button ( 2s) to select
the PRbpm parameter from
100 to 140 for the highest
setting warning (Pic.2). At last,
long press button ( 2s)
again to select the PRbpm
parameter from 50 to 80 for
the lowest setting warning
(Pic.3).
Pic.3
Pic.2
Pic.1
5
Sound Setting. Continue to
long press ( 2s) button .
As the display as Pic.4 and
Pic.5,“OFF”and“ON”will
be selected to turn on or off
the buzzer.
Normal Range for Healthy
Individuals in a Quiet State:
SpO2% >94 60<PR<120
Pic.4
Pic.5
6
Display Direction Change.
When the panel shows the
readings, short press button
twice to change the
display direction. Short press
button once again to
return to the original display
direction.
Important Notice
To get the best reading possible,
7
you should NOT:
Test with your painted fingers
and toenails which can
obstruct proper readings
use an earlobe instead in this
case.
Test under bright overhead
lighting, including sunlight,
can effect readings take
your readings in rooms with
normal or low-light
conditions.
Move while testing, body
movement including
8
shivering, sneezing, etc., all
can affect proper readings.
Contact Us
For the detailed instruction of
this product, please visit:
http://www.agptek.com.
If you have any problem or
suggestions, please contact
support@agptek.com.
9
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68

AGPtek Pulse Oximeter Owner's manual

Type
Owner's manual
This manual is also suitable for

AGPtek Pulse Oximeter is a non-invasive device intended for spot-checking of oxygen saturation of arterial hemoglobin (SpO2) and pulse rate. It is suitable for use in home and healthcare environments. The device allows users to monitor their blood oxygen saturation and pulse rate quickly and easily. It features an easy-to-read display, adjustable brightness, and is lightweight and portable for convenient use.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI