Zebra ST6084 Owner's manual

Zebra
Brand
Zebra
Model
ST6084
Type
Owner's manual
Page 1 of 2 Part No. 1005978 Revision A
Installation Instruction for ST6084 Rubber Boot
1. Installation of the ST6084 Yellow Rubber Boot for Expansion Back WWAN End Cap
STEP 1.
INSERT HANDHELD THROUGH
OPENING IN THE RUBBER BOOT
AS SHOWN IN FIGURE A.
Continued on other side…
Figure A
STEP 2.
SECURELY FIT THE FRONT
END OF THE HANDHELD IN
THE END OF RUBBER BOOT.
SEE FIGURE B.
Figure B
Page 2 of 2 Part No. 1005978 Revision A
STEP 3.
FIRMLY PULL BOTTOM CORNERS OF RUBBER BOOT (ONE AT A TIME
WORKS BEST) AROUND THE END OF THE HANDHELD UNTIL SECURELY
ENCLOSED. AS SHOWN IN FIGURES C AND D.
Figure C Figure D
STEP 4.
FIGURE E SHOWS THE
COMPLETED ASSEMBLY
OF THE RUBBER BOOT.
Appendix A: Support Services
Fortechnicalsupport,pleasevisittheSupportsectionofourcommunityIngenuityWorking:http://community.psion.com/support.
Figure E
  • Page 1 1
  • Page 2 2

Zebra ST6084 Owner's manual

Zebra
Brand
Zebra
Model
ST6084
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents