Rust-Oleum Automotive 253436 User guide

Brand
Rust-Oleum Automotive
Model
253436
Type
User guide

Rust-Oleum Automotive 253436 is designed to remove grease, dirt, wax, sanding dust and other contaminants from surfaces before applying paint. The product comes in pre-moistened wipes that are easy to use and can be used on most surfaces including bare metal, aluminum, fiberglass, automotive plastics, automotive OEM finishes and fully dry automotive finishes. The wipes are safe to use and will not damage the surface. To use the wipes, simply wipe the area to be painted with a clean wipe, turning frequently to ensure a clean side is contacting the surface.

Rust-Oleum Automotive 253436 is designed to remove grease, dirt, wax, sanding dust and other contaminants from surfaces before applying paint. The product comes in pre-moistened wipes that are easy to use and can be used on most surfaces including bare metal, aluminum, fiberglass, automotive plastics, automotive OEM finishes and fully dry automotive finishes. The wipes are safe to use and will not damage the surface. To use the wipes, simply wipe the area to be painted with a clean wipe, turning frequently to ensure a clean side is contacting the surface.

TECHNICAL DATA ATO-19
AUTOMOTIVE PAINT PREP WIPES
IPES ADDITIVE
Rust-Oleum Corporation Form: GDH-511
11 Hawthorn Parkway Phone: 877-385-8155 Rev: 101614
Vernon Hills, Illinois 60061 www.rustoleum.com
.DESCRIPTION AND USES .
Rust-Oleum
®
Paint Prep Wipe easily removes grease, dirt,
wax, sanding dust and other contaminants to leave a
clean, paintable surface. Paint Prep Wipes are safe to use
on most surfaces including bare metal, aluminum,
fiberglass, automotive plastics, automotive OEM finishes
and fully dry automotive finishes.
.PRODUCTS .
SKU Description
253436 Paint Prep Wipes
.PRODUCT APPLICATION .
USAGE DIRECTIONS
Use outdoors or in a well ventilated area such as an open
garage. Test Paint Prep Wipe in a small inconspicuous
area to ensure surface compatibility. Remove any loose
paint or rust from the surface with a wire brush or
sandpaper. Wipe the area with Paint Prep Wipe, turning
frequently to ensure a clean side is contacting the surface.
While the surface is still wet, dry the area with a clean lint-
free cloth.
.PRODUCT APPLICATION .
WARNING! If you scrape, sand or remove old paint, you
may release lead dust. LEAD DUST IS TOXIC.
EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS
ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN
CHILDREN. PREGNANT WOMEN SHOULD ALSO
AVOID EXPOSURE. Wear a NIOSH-approved respirator
to control lead exposure. Clean up carefully with a HEPA
vacuum and a wet mop. Before you start, find out how to
protect yourself and your family by contacting the Natioanl
Lead Information Hotline at 1-800-424-LEAD or log
ontowww.eps.gov/lead.
.PHYSICAL PROPERTIES .
Physical Properties
PAINT PREP WIPES
Composition
Proprietary
Solvents
Aliphatic Hydrocarbons and Mineral Oil
Packaging
1 Paint Prep Wipe (7.9 in. x 11.8 in.)
Shelf Life
5 years
Flash Point
105°F (41°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements
of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our
materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any, will be
limited to replacement of defective materials. All technical information is subject to change without notice.
  • Page 1 1

Rust-Oleum Automotive 253436 User guide

Brand
Rust-Oleum Automotive
Model
253436
Type
User guide

Rust-Oleum Automotive 253436 is designed to remove grease, dirt, wax, sanding dust and other contaminants from surfaces before applying paint. The product comes in pre-moistened wipes that are easy to use and can be used on most surfaces including bare metal, aluminum, fiberglass, automotive plastics, automotive OEM finishes and fully dry automotive finishes. The wipes are safe to use and will not damage the surface. To use the wipes, simply wipe the area to be painted with a clean wipe, turning frequently to ensure a clean side is contacting the surface.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents