Plug in the power cord. The LCD display lights up and all the
icon buttons will be shown for 1 second.
After 1 second, the screen will become black for shutdown
status, remaining the Power button is semi-lit.
Press the Power button, the screen and LCD display will light
up. The default menu mode is AIR FRY, The LCD display will
light up showing Time and Temp.
NOTE: All the semi-lit icons can be selected, and will be fully lit
when selected. If the icons are extinguished means could not
be selected.
To set up the Menu mode you want.
NOTE: The LCD display will show different messages according
to the menu modes.
① When you choose Air Fry, Rotiss, Bake, Roast, Pizza, Broil,
Cookies, Ferment, Dehyd, Warm, Reheat, the LCD will display
the temperature(℉) and time (Hrs/Mins/Secs)
② When you choose Toast or Bagel, the LCD will display the
bread colors(C), bread pieces(P).
1.
2.
3.
4.
USING THE DIGITAL CONTROL PANNEL If there is Fan button or 360°button semi-lit, it means you can
add it before the operation. If the button is fully-lit, you can
press to cancel and it will become semi-lit.
If you want to adjust the preset time or temperature, you can
adjust that before the operation or in pause status.
① Press Temp button then press the + & - button to increase or
decrease the temperature. Long press to speed up the
adjustment.
② Press Time button then press the + & - button to increase or
decrease the time. Long press to speed up the adjustment.
If you want to adjust the preset bread piece or color, you can
adjust that before the operation or in pause status.
① Press Bread Slice button then press the + & - button to
increase or decrease.
② Press Bread Shade button then press the + & - button to
increase or decrease.
NOTE: If you did not adjust any button, the unit will operate in
its default setting.
After choosing the Menu mode you need, press Start/Pause
button to start.
There are 9 Menu modes ( Air Fry, Rotiss, Toast, Bagel, Bake,
Roast, Pizza, Broil, Cookies) will get into preheat mode
before operation. And the Time display will blink during
preheating. After preheating is over, wait about 5 seconds, the
unit will get into Menu operation without pressing any button.
5.
6.
7.
8.
9.