2. Milwaukee
  3. 48-22-8424

Milwaukee 48-22-8424 Template

  • I have reviewed the instructions for creating a custom divider for the Milwaukee PACKOUT tool box model 48-22-8424. The document includes a template and dimension guidelines for creating a divider from 1/4" plywood. I am ready to answer your questions about the instructions or the divider itself.
  • What paper size should I use to print the template?
    What material should I use to make the divider?
    What is the model number of the tool box that this divider is designed for?
    How to confirm that template has properly scaled
CRE ATE
A DIVIDER
FOR YOUR
PACKOUT™
TOOL BOX
48-22-8424
Directions:
1. Print template on 8.5" x 11" paper and confirm
page scaling is marked “actual size” or “100%.”
2. Cut along black dotted lines.
3. Tape paper together while matching up the
MILWAUKEE® PACKOUT™ logo.
4. Trace template on 1/4" plywood.
5. Confirm the markings dimensions
match the below reference.
6. Cut plywood along markings.
7. Slide plywood into notches identified in photo below.
4-1/4"
12-3/4"12-3/4"
A
B
TEMPLATE
DIMENSIONS
THIS DIAGRAM
NOT TO SCALE
A
B
CONFIRM
To ensure this template has printed out to
scale, this area should be the same size as
a credit card.
If not, please be sure that any page scaling is
turned off in page setup or printer settings.
2-1/8" x 3-3/8"
/