Whyte WM916 Multi switches User manual

WM916 Multi switches
Brand
Whyte
Model
WM916 Multi switches
Type
User manual

Whyte WM916 Multi switches are line powered cascading multiswitches with Pro-Tap™ Technology that enables easy selection of tap attenuation (0, -10, or -20 dB) while maintaining a trunk-through loss of only 4 dB. Ideal for large-scale IRS systems, they come with 8 SAT + 1 TERR input and 16 tap outputs. With a gain of 10 dB for SAT and 8 dB for TERR, they offer excellent signal strength. The built-in 4G LTE filter ensures interference-free reception. Use Whyte Series 9 Launch Amplifiers & Splitters to build a robust IRS system.

Whyte WM916 Multi switches are line powered cascading multiswitches with Pro-Tap™ Technology that enables easy selection of tap attenuation (0, -10, or -20 dB) while maintaining a trunk-through loss of only 4 dB. Ideal for large-scale IRS systems, they come with 8 SAT + 1 TERR input and 16 tap outputs. With a gain of 10 dB for SAT and 8 dB for TERR, they offer excellent signal strength. The built-in 4G LTE filter ensures interference-free reception. Use Whyte Series 9 Launch Amplifiers & Splitters to build a robust IRS system.

950-2150MHz
87-790MHz
8 SAT + 1 TERR
16
≥10dB
≥8dB
10dB±2dB
10dB±2dB
0/-10/-20dB
>10dB/>10dB
>8dB/>8dB
>8dB
95dBµV
>85dBµV
>28dB
≥25dB
>25dB
>21dB
≥20dB
75Ω
13/18V/22kHz/DiSEqC
18VDC
YES
YES
370mA
LED
2A
12VDC100mA
YES
Up to 6mm² core
YES
204 x 214 x 43mm
1098g
950-2150MHz
87-790MHz
8 SAT + 1 TERR
24
≥10dB
≥8dB
10dB±2dB
10dB±2dB
0/-10/-20dB
>10dB/>10dB
>8dB/>8dB
>8dB
95dBµV
>85dBµV
>28dB
≥25dB
>25dB
>21dB
≥20dB
75Ω
13/18V/22kHz/DiSEqC
18VDC
YES
YES
370mA
LED
2A
12VDC100mA
YES
Up to 6mm² core
YES
204 x 278 x 43mm
1412g
950-2150MHz
87-790MHz
8 SAT + 1 TERR
32
≥10dB
≥8dB
10dB±2dB
10dB±2dB
0/-10/-20dB
>10dB/>10dB
>8dB/>8dB
>8dB
95dBµV
>85dBµV
>28dB
≥25dB
>25dB
>21dB
≥20dB
75Ω
13/18V/22kHz/DiSEqC
18VDC
YES
YES
370mA
LED
2A
12VDC100mA
YES
Up to 6mm² core
YES
204 x 342 x 43mm
1738g
SAT
TERR
SAT
TERR
SAT
TERR
SATTrunkInput/Output
TERRTrunkInput/Output
TapOutput
SAT(IMA³-35dB)
TERR(IMA³-60dB)
Trunk-Trunk
Cross-Polar
Tap-Tap(SAT)
Tap-Tap(TERR)
Rejecon
Legacy
ViaDCIn
ViaHL&HHInput
TERRInputOnly
FrequencyRange
Input(F-TypeFemale)
TapOutputs(F-TypeFemale)
Gain
GainControl
ProTap™AenuaonSelect
ReturnLoss
MaxOutputLevel
Isolaon
Impedance
SwitchingCommands
PowerSupplyVoltage
Powering
PowerConsumpon(Max)@18V
PowerIndicaon
TrunkMaxCurrentPass(perLine)
MastheadSupply(Switchable)
EarthTerminalBars(TapOutputs)
EarthLug
REDCompliant
DimensionsincludingEarthBarsWxLxH(mm)
Weight
LMODE WM916 WM924 WM932
4 Years Warranty
Red Compliant
Line Powered cascading Mulswitch
Separate SAT & TERR Pro-Taps™ for ease of installaon
Comes with Earth Bars ed
Use as standalone when powered with a Whyte PSU
SAT gain 10dB / TERR gain 8dB
Gain Control on all inputs
Colour coded inputs and outputs
LED Power Indicator & Inbuilt 4G LTE lter
Uses receiver power to reduce demands on PSU
Switchable 12V DC Supply to Terrestrial input
Comes with 9 F-Type couplers for easy connecon to al
Series 9 products
Use Whyte Series 9 Launch Ampliers & Spliers to build
large scale IRS Systems
Whyte Series 9 is a range of 9 wire line powered Cascading
Mulswitches. The Whyte Series 9 range comes ed with Pro-
Tap™ Technology. Developed by Whyte Technologies, a Pro-Tap
is an in-built “Protean Tap” which enables the installer to easily
select tap aenuaon of 0, -10 or -20dB whilst sll maintaining a
trunk through loss of only 4dB. IRS System pre-planning is virtually
not required as tap loss sengs are selected at the commissioning
stage.
WM916 | WM924 | WM932
   
Series 9 Mulswitches
Pro-Tap
  • Page 1 1

Whyte WM916 Multi switches User manual

WM916 Multi switches
Brand
Whyte
Model
WM916 Multi switches
Type
User manual

Whyte WM916 Multi switches are line powered cascading multiswitches with Pro-Tap™ Technology that enables easy selection of tap attenuation (0, -10, or -20 dB) while maintaining a trunk-through loss of only 4 dB. Ideal for large-scale IRS systems, they come with 8 SAT + 1 TERR input and 16 tap outputs. With a gain of 10 dB for SAT and 8 dB for TERR, they offer excellent signal strength. The built-in 4G LTE filter ensures interference-free reception. Use Whyte Series 9 Launch Amplifiers & Splitters to build a robust IRS system.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents