2. Whyte
  3. 10033

Whyte 10033 Operating instructions

  • Hello! I'm your chat assistant, and I've reviewed the instruction manual for the Whyte Series 5 Launch Amplifiers, specifically the WATS-530 and WATS-517 models. This manual details the amplifiers' flexibility, powering options, and gain controls. I'm ready to answer any questions you have about these launch amplifiers, their use, and specifications.
  • Can Whyte Launch Amplifiers be installed outdoors?
    How can I power the Whyte Launch Amplifier?
    What type of coaxial cable should be used with the F connectors?
    What is the guarantee for Whyte products?
    What are the different models available in the Whyte Series 5 Launch Amplifier Range?
LAUNCH AMPLIFIER
INSTRUCTION MANUAL
www.whytetechnologies.com
WATS-530
WATS-517
Safety
Precauons
Guarantee
General Descripon
Technical Descripon
Example Conguaron
Specicaons
3
3
3
4
5
6
7
CONTENTS
www.whytetechnologies.com
2www.whytetechnologies.com 3
Whyte
SAFETY
Whyte Launch Ampliers are intended for indoor use only. Do not install the
amplier in damp, humid, hot or dusty areas.
Switch o and remove the power supply when making connecons to the
Launch Amplier to avoid damaging the unit.
Always earth bond the Launch Amplier using the earth bonding lug to a suitable
earth bonding point using min 4mm diameter earth cable.
Do not remove the cover of the Launch Amplier or disassemble it as this will
invalidate the guarantee.
PRECAUTIONS
To ensure trouble free operaon:
Do not remove the cover of the mulswitch or disassemble it as this will invalidate
the guarantee.
The female F connectors on this unit were designed for use with '100' type
coaxial cable with a centre core diameter of 1mm². When using larger CT125
or CT167 cables, you must ensure that suitable F connectors with reducing
pins are used otherwise damage to the unit will occur which will invalidate the
guarantee.
Do not over ghten the F connectors (nger ght only).
GUARANTEE
All Whyte products are guaranteed for a period of 4 years from the date of
purchase.
www.whytetechnologies.com
4www.whytetechnologies.com 5
The Whyte Series 5 Launch Amplier range are compact and designed to be
universally exible. They can be used in small, medium and large Integrated
Recepon Systems (IRS). All Whyte Series 5 Launch Ampliers may be ulised
as Launch Ampliers or Line Ampliers depending on the specic IRS system
design requirements.
GENERAL DESCRIPTION TECHNICAL DESCRIPTION
Whyte Series 5 Launch Ampliers can be powered directly via the 18V Auxiliary
Input or may be line powered via the SAT input or output trunk lines.
A Whyte Power Supply Unit may be connected to the 18V Auxiliary Input which
will pass power upwards and downwards via the HL and HH lines. All IF trunk
lines are DC passing. The IF inputs provide power to the LNB irrespecve of
whether they are powered locally or line powered.
A switchable 12V supply is provided to power a Mast Amplier if required. If a
Mast Amplier is not present this should be le in the o posion.
There are 2 models available in the Whyte Series 5 Launch Amplier Range;
WATS-530 and WATS-517 are summarised as follows (see technical specicaons
for further details).
WATS-530:
SAT Gain 30dB TERR Gain 24dB
SAT & TERR Gain Controls
SAT & TERR Slope Controls
WATS-517:
SAT Gain 17dB TERR Gain 13dB
SAT & TERR Gain Controls
SAT & TERR Slope Controls
Whyte
www.whytetechnologies.com www.whytetechnologies.com
67
Whyte
SPECIFICATIONSEXAMPLE CONFIGURATION
www.whytetechnologies.com
@WhyteTech
@WhyteTechnologies
Whyte Technologies
@WhyteTechnologies
Whyte Technologies
Chevron Distribuon Ltd
Unit 12 -13,
Watermill Business Centre
Edison Road
Eneld, EN3 7XF
Phone: 0330 999 1980
E-mail: inf[email protected]om
Whyte
/