Seitron Chemist 500/500 Be Green Quick start guide

Seitron
Brand
Seitron
Model
Chemist 500/500 Be Green
Type
Quick start guide
15/01/14
10:00
ηs
% 91.4
Qs
% 8.6
ΔT
°C 74.7
T air
°C 15.4
T flue
°C 190.1
λ,n
1.25
CO2
% 9.3
O2
% 4.2
Memory
Average analysis
In case the automatic print mode is set then the average analysis printing start automatically.
Conversely, after the sampling of the third analysis, the average analysis is shown, so that it can be sent to the
printer or downloaded as explained in the following.
WARNING! Before proceeding with the combustion analysis remember to set the proper fuel.
Automatically
saves the first
sample when the
set interval
expires, and so on
until the third
sample.
KEYBOARD FUNCTIONS CONTEXT KEYS
CONTEXT KEY FUNCTION
Makes the pressure zero
Updates the measure
Saves the current measurement or
analysis in the memory location selected
from the ‘Select Memory’ menu
Starts the report ticket
Enters the Print menu
Stops the flue gas analysis
Enters the modify mode for the selected
parameter
Confirms the settings
Cancels the change/operation and returns
to the previous screen
Zooms the screen
Shows the details for the selected
parameter
‘Find’ function; starts a quick search for
the analysis to recall
OK
O
Esc
K300000000SE 030155 080518
KEYS FUNCTION
Activate the context keys shown on
the display
Enters the Memory menu
Enters the Print menu
Enters the Configuration menu
Starts the flue gas analysis
Enters the measurements menu
Turns the instrument on/off
Quits the current screen
Selects and/or modifies
Confirms data
Generates QR code, only if the
display shows the icone “ “.
OK
ESC
The magnets in the back of the instrument can damage credit cards, hard driver, mechanical watches,
pacemakers, defibrillators and other devices proven sensitive to magnetic fields.
It is recommended to keep the instrument at a distance of at least 25cm away from these devices.
Compliant with: EN 50379-1, EN 50379-2, UNI 10845, UNI 10389-1
FEATURES:
Flue gas analysis
Calculating of stack heat loss and efficiency
Ambient CO measurement
Measuring differential pressure
Draught measurement according to UNI 10845
Pressure measurement in the gas supply pipe.
Gas pipes tightness test according to standards UNI 7129 and UNI 11137
Store Smoke value, calculating mean value
Generation and display of a QR Code for downloading the data of the analyses
Possibility to print on ticket the analyses and the performed measures with a Bluetooth® printer (optional)
Via del Commercio, 9/11 36065 - MUSSOLENTE (VI)
+39.(0)424.567842 - +39.(0)424.567849
[email protected] - www.seitron.com
Seitron respects the nature and the environment, therefore provides this quick user
guide to avoid any unwanted waste of paper. However the complete manual for use and
maintenance of the instrument is already available in the USB stick (included), or can be
downloaded from the website www.seitron.com.
Respect your environment: think before printing the full manual on paper.
OK
+
OK
Configuration
Fuel
15/01/14
10:00
Biogas
Propane-Air
Fuel oil
Diesel oil
Butane
L.P.G.
Propane
Natural gas
OK
15/01/14
10:00
Fuel
O2 reference
Measure units
Measures list
Condensation
NOx/NO ratio
Autozero
Configuration
Analysis
15/01/14
10:00
Analysis
Operator
Information
Language
Instrument
Alarms
Diagnostic
Configuration
Restore
OK
Memory
Save
15/01/14
10:00
OK
Memory 1
Mode UNI 10389
Samples 3
Interval
s 30
15/01/14
10:00
ηs
% 91.4
Qs
% 8.6
ΔT
°C 74.7
T air
°C 15.4
T flue
°C 190.1
λ,n
1.25
CO2
% 9.3
O2
% 4.2
Combustion analysis
UNI 10389
OK
15/01/14
10:00
ηs
% 91.4
Qs
% 8.6
ΔT
°C 74.7
T air
°C 15.4
T flue
°C 190.1
λ,n
1.25
CO2
% 9.3
O2
% 4.2
Combustion analysis
UNI 10389
1
120
OK
+
FAC-SIMILE
15/01/14
10:00
Scan the QR code using the Seitron APP
“SMARTFLUE LITE MOBILE”, to
download the acquired data related to the
average analyses and the additional
measures, if performed.
15/01/14
10:00
Measurements
Ambient CO
CO
ppm
0
CO max
ppm
0
15/01/14
10:00
Measurements
Ambient CO
CO
ppm
0
CO max
ppm
0
Connect the gas probe to the instrument and perform
the measurement.
Wait 5 minutes.
15/01/14
10:00
Measurements
Draft
P diff
hPa
0.000
T outdoor
°C
20
O
15/01/14
10:00
Measurements
Draft
P diff
hPa
0.001
T outdoor
°C
20
O
Once the
pressure zeroing
is completed
insert the probe in
the chimney and
measure the
draught.
15/01/14
10:00
ηs
% 91.4
Qs
% 8.6
ΔT
°C 74.7
T air
°C 15.4
T flue
°C 190.1
λ,n
1.25
CO2
% 9.3
O2
% 4.2
Combustion analysis
UNI 10389
KEEP
PRESSED
FOR 2
SECONDS
UNTIL IT
BEEPS
WARNING!
During autozero, only for
models without electrovalve
(CHEMIST 500B), DO NOT
insert the gas probe in the
chimney.
Memory
Select
15/01/14
10:00
Customer Seitron
Memory 1
Address Via del Commercio
n° 9/11
Phone 0424 567842
Mussolente
Boiler xxxx
Date 15/01/14
In "Select" can be
inserted all the
customer data.
Memory
Data logger
15/01/14
10:00
Samples 3
Mode UNI 10389
Interval
ppm 120
Print auto
Memory auto
In "Data logger" the
user can define the
analysis, memory
selection and printing
modes.
Suggested settings:
Mode: UNI 10389
Print: auto
Memory: auto (assigns
a new memory at each
instrument turn-on).
15/01/14
10:00
Save
Select
Delete
Average
Data logger
Usage %
Memory
15/01/14
10:00
Measurements
Draft
P diff
hPa
0.001
T outdoor
°C
20
O
Before zeroing the
pressure it is
mandatory to
extract the probe
from the chimney.
Save the
measurement.
Zeroing
instrument
Save the
measurement
Data logger
Select
Draft
Ambient CO
AAC SO01
AA SF--A
AAC TA03A
AAC KP01
AA AL05
AA SA08
OK OK
O
It is mandatory to perform the
instrument autozero in clean air.
  • Page 1 1
  • Page 2 2

Seitron Chemist 500/500 Be Green Quick start guide

Seitron
Brand
Seitron
Model
Chemist 500/500 Be Green
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents