Ten-Tec 588AT OMNI-VII Rx Operating instructions

Brand
Ten-Tec
Model
588AT OMNI-VII Rx
Type
Operating instructions

This manual is also suitable for

Updating the FLASH FIRMWARE on Ten-Tec OMNI-VII
1. Turn Transceiver OFF.
2. Connect a PC to the transceiver using the appropriate cable.
3. Turn the Transceiver ON while holding down the "0" button. Wait for display to indicate
"Key Is Pressed"
4. Start the Update program
5. Select the COM port to which the Transceiver is attached.
6. Choose UPDATE under the PROCESS menu.
7. Select the RUF le under the Process Menu.
8. The program will update the radio and report any errors encountered. During the update
process the OMNI-VII screen will indicate progress.
  • Page 1 1

Ten-Tec 588AT OMNI-VII Rx Operating instructions

Brand
Ten-Tec
Model
588AT OMNI-VII Rx
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents